I’m glad she isn’t hurt and able to run another day! Can’t wait to see the GT back on the track…. Or on a speed run somewhere 💯 Thanks for the fun vid Tasty 🩷
@TastyBRC
Ай бұрын
Thanks for the comment ✌️ I am going to open that crankshaft and the exhaust port before installing it in the Gt 😤
@aimlockersesp7680Ай бұрын
I just bought a axial .28RR spec1 with a jp4 pipe for around 60 bucks and i cleaned everything and tested the pinch everything was fine doesnt have burning signs or i dont see any used signs it is like brandnew. Today im gonna test that engine that dude on ebay just told me he found that engine in the garage and didnt have so much idea about nitros. But dude 60 bucks for a like brandnew axial and a jp 4 pipe for me it was like a gift
@TastyBRC
Ай бұрын
Souns like a great deal! Axial was very popular back in time, cheap and strong engines for bashers. The jp4 is a good allaround pipe
@Nitro_rc_life2 ай бұрын
Like I always say "fuck it and run it"
@RCWright2 ай бұрын
Well it certainly runs really good 😊 nice one, will be great in the GT
@TastyBRC
Ай бұрын
It runs great in the gt and will run even better once I open a bit more that crank window 😁 Thanks for stopping by ✌️
@LawrenceTimme2 ай бұрын
Damn 155c is mega hot. Highest ive had with a shell on is 135c.
@TastyBRC
Ай бұрын
I have done worst 😅
@neontetra10002 ай бұрын
Someone needs to redesign these sleeves to be easier to get out. If it had a couple of threaded holes in the top lip at least you could put a couple of bolts to grab hold of. Or even a lip to prise it with flat head but there is nothing to hold There must be some way to make it.,
@TastyBRC
Ай бұрын
I dont think that is going to happen.. sadly. But this was my fault 😓 Im still learning
@rcbuggyhl4674Ай бұрын
Salut Tasty 😉 ça me plairait bien un jour un Ultimate... Bon j'imagine que tu vas bientôt avoir un B2105 😂
@TastyBRC
Ай бұрын
Salut Hervé, pas de b2105 pour moi j'ai d'autres dépenses à prévoir... puis j'ai pas mal de moteurs à roder et je ne trouve pas le temps de m'y mettre 🫤
@rcbuggyhl4674
Ай бұрын
@@TastyBRC tu as trop de moteur 😁
@kings-racing2 ай бұрын
Looks like the brass expanted and the chrome liner remained intact. Very strange. How did you install the sleeve again? Did you just press it in or did you sand it? You deffinitely need a hook to press out stuck sleeves from the backplate ( i will send you a picture). That works better than using a lot of heat. Engine is running good👍
@TastyBRC
Ай бұрын
Its very strange indeed! I tried to install a different sleeve and it fits the Block perfect but not this one.. I polished it for a long time, its not perfect, still a resistance as tou can see, but it fits now and runs good. Thanks for the comment Kings
@aimlockersesp76802 ай бұрын
I was at 160 celsius with my lrp z28 and it survived im at 10 litres and yesterday i gave him a new pinch and hes already new again hope i can drive another 10 litres with him
@TastyBRC
Ай бұрын
Im not surprised, lrps tend to run hot but they can take it 💪💪
@user-tm2wp9vo9lАй бұрын
i have a maxy cinco is it a good engine
@TastyBRC
Ай бұрын
I am currently breaking-in my maxys cinco 💥💥
@aimlockersesp7680Ай бұрын
mate im waiting for your videos for mem it doesnt make sanse which kind of art video that is just make a review or like nitro todd talking about a specific engine
@TastyBRC
Ай бұрын
A lot more coming up next week ✌️
@Nitro_rc_life2 ай бұрын
I don't think you overheated it my axial runs super hot 325f it's odd but that's how it likes it
@TastyBRC
Ай бұрын
It held up to 155° but running rich at this temperature is dangerous! The oil turns to glue 😰
Пікірлер: 28
perfect run and tuning champ😍👌
@TastyBRC
Ай бұрын
Thank you 👍
I’m glad she isn’t hurt and able to run another day! Can’t wait to see the GT back on the track…. Or on a speed run somewhere 💯 Thanks for the fun vid Tasty 🩷
@TastyBRC
Ай бұрын
Thanks for the comment ✌️ I am going to open that crankshaft and the exhaust port before installing it in the Gt 😤
I just bought a axial .28RR spec1 with a jp4 pipe for around 60 bucks and i cleaned everything and tested the pinch everything was fine doesnt have burning signs or i dont see any used signs it is like brandnew. Today im gonna test that engine that dude on ebay just told me he found that engine in the garage and didnt have so much idea about nitros. But dude 60 bucks for a like brandnew axial and a jp 4 pipe for me it was like a gift
@TastyBRC
Ай бұрын
Souns like a great deal! Axial was very popular back in time, cheap and strong engines for bashers. The jp4 is a good allaround pipe
Like I always say "fuck it and run it"
Well it certainly runs really good 😊 nice one, will be great in the GT
@TastyBRC
Ай бұрын
It runs great in the gt and will run even better once I open a bit more that crank window 😁 Thanks for stopping by ✌️
Damn 155c is mega hot. Highest ive had with a shell on is 135c.
@TastyBRC
Ай бұрын
I have done worst 😅
Someone needs to redesign these sleeves to be easier to get out. If it had a couple of threaded holes in the top lip at least you could put a couple of bolts to grab hold of. Or even a lip to prise it with flat head but there is nothing to hold There must be some way to make it.,
@TastyBRC
Ай бұрын
I dont think that is going to happen.. sadly. But this was my fault 😓 Im still learning
Salut Tasty 😉 ça me plairait bien un jour un Ultimate... Bon j'imagine que tu vas bientôt avoir un B2105 😂
@TastyBRC
Ай бұрын
Salut Hervé, pas de b2105 pour moi j'ai d'autres dépenses à prévoir... puis j'ai pas mal de moteurs à roder et je ne trouve pas le temps de m'y mettre 🫤
@rcbuggyhl4674
Ай бұрын
@@TastyBRC tu as trop de moteur 😁
Looks like the brass expanted and the chrome liner remained intact. Very strange. How did you install the sleeve again? Did you just press it in or did you sand it? You deffinitely need a hook to press out stuck sleeves from the backplate ( i will send you a picture). That works better than using a lot of heat. Engine is running good👍
@TastyBRC
Ай бұрын
Its very strange indeed! I tried to install a different sleeve and it fits the Block perfect but not this one.. I polished it for a long time, its not perfect, still a resistance as tou can see, but it fits now and runs good. Thanks for the comment Kings
I was at 160 celsius with my lrp z28 and it survived im at 10 litres and yesterday i gave him a new pinch and hes already new again hope i can drive another 10 litres with him
@TastyBRC
Ай бұрын
Im not surprised, lrps tend to run hot but they can take it 💪💪
i have a maxy cinco is it a good engine
@TastyBRC
Ай бұрын
I am currently breaking-in my maxys cinco 💥💥
mate im waiting for your videos for mem it doesnt make sanse which kind of art video that is just make a review or like nitro todd talking about a specific engine
@TastyBRC
Ай бұрын
A lot more coming up next week ✌️
I don't think you overheated it my axial runs super hot 325f it's odd but that's how it likes it
@TastyBRC
Ай бұрын
It held up to 155° but running rich at this temperature is dangerous! The oil turns to glue 😰
@Nitro_rc_life
Ай бұрын
@@TastyBRC very interesting!!!!
1