I have this exact bow…same color…freaking awesome

Great looking bow. Love the color

Killer Bow build 🤙

Now I can agree to that!!!

JR you built a sick insane PSE carbon bow. You really did a killer setup there and I know that you enjoy it. It's almost as expensive as my RX-8 that I just built. My bow build costed just shy of $5000 USD but I live in Canada so my bow build costed me $6800 CAD. Orher than that I have full respect for both of you guys and both of you are very knowledgeable in the bow industry and smart guys. Enjoy your PSE and keep up the great work boys!!

@simonaudet1107

5 ай бұрын

Have an Rx-8 on order! Also in Canada, ordered a custom buid trough Vip hoyt sale. How do you like it so far??? What gear did you put on?

@krisaunedi4920

5 ай бұрын

@simonaudet1107 My bow build was directly built by Hoyt personnelly with the Quiver. MX2 Ultra rest hoyt Stabilizers and quick detach and of course the new Garmin Xero A1i Pro site. Where was this VIP sale and when??

@mark-sv2py

5 ай бұрын

You sound like a real fuck stick

@simonaudet1107

5 ай бұрын

@@krisaunedi4920 my dealer call it a Vip event because you need to be invited to participate... Canadian Hoyt rep is there with all the new bows and accessories, we shoot them, we can order custom colors at a special price with no upcharge and we have 20% off on all the accessories. Happens once a year in december

@wswillett

4 ай бұрын

With that COSTED you so much you should have spent it on an education....it will COSTED you in the long run

What did you use for the spacer? I am unable to mount my tightspot without it hitting

if you guys scoot back that chrono to about 8 yards it will give you much more accurate readings with a lot less deviation. they say 4 yards for archery in the manual but it definitely performs better around 8 yards. its because it uses radar tech to read the fps.

@extremeoutfitters

4 ай бұрын

Appreciate the tip!

I’m shooting 27inch draw..63 lbs..366gr. 286 fps

If want ultra high end just do a Mathews LIFT and put all Mathews accessories on it. Love Mathews but if you build a PSE or Hoyt carbon bow and put normal stabs on it they don't cost any more. The stab prices and vbar prices for the Mathews stabs run the price thru the roof. My PSE Levitate 2.0 with Quattro stabs cost less than a Lift with Mathews stabs.

@krisaunedi4920

5 ай бұрын

That's not true buddy. I've got the new Hoyt RX-8 fully built shy of $5000USD. I live in Canada so my bow build costed me $6800 CAD. Try and beat that.

@vm859

5 ай бұрын

Bars arent worth it imo. Quiver is and is the best fitment on the market.

Hey guys love your channel. Can you please tell me if this mach 30 draw is as smooth or close to as smooth as the core ss??

@extremeoutfitters

3 ай бұрын

Core SS on comfort is probably the smoothest drawing bow out

the uv site robust lol nope seen 2 break already and piss on Packaging I dont wanna pay more for a box that sits on the counter or trash you want robust get a spot hogg cheaper better and robust nice bow though awesome bow build

I was looking at buying an ultraview for my lift. Then I read about their warranty. I'm not sure about y'all, but I hunt in varying conditions, and most of those conditions void their warranty. For example, if I go hunt in a light rain, the warranty is void. Not to mention, the warranty is only 1 year anyway. To me, that says they don't stand behind their product. It's a shame... I really was excited about this sight!

@coltonbird7187

5 ай бұрын

I've run Black Gold sights for years, and any issue I've ever had they fixed, no questions asked. Hell my pull rope broke once and my bow fell on the sight and they refurbed it for me at no cost. It was then I was 100% sold on them. Best customer service anywhere I've ever found. Doubt I'll ever use anything else

@luisthisguy9825

5 ай бұрын

Dammit ...i ended up buying one

Is that epsilon the riser interface version and does it work directly with the factory dovetail on the 30 ds? Getting ready to order one but was a little confused on how it’s been explained on the hamskea site. Just got my 30ds 80lb in and wanting to give hamskea a try. Thanks guys , love the videos.

@extremeoutfitters

4 ай бұрын

It’s the epsilon with the cor riser interface bracket. You will replace the factory dovetail with the bracket included with the epsilon. If you have any questions give us a call 910-355-2118. We can help you out. If you order from our website use the code “ex10” and “free ship”

@jarredmeadows8160

4 ай бұрын

Thanks for clearing it up. That’s what I was figuring but just wanted to be sure. Thanks for the reply!

Are the cams Cerakoted or anodized?

@jroutdooradventures

5 ай бұрын

It is a cerakote finish.

You mention just needing to tie the cable to limb for the hamskea and you’re all set which is wrong. You do need to setup timing on their cable driven rests, done by moving the location on the limb, there is a full instruction page on the website.

@johndenver5029

4 ай бұрын

You are confusing cable and limb driven....you said both

600 views 40 likes come on folks🤷‍♂️

Have any coupon codes for your website?

@extremeoutfitters

5 ай бұрын

Sign up for our newsletter and you’ll receive a discount code for your first purchase plus you’ll get discounts only available to our newsletter subscribers!

* Most Expensive Hunting bow build ever. i know you guys got some Titles in .

I have champagne taste n a beer budget, maybe a water budget

WHATS THE LIGHTEST CARBON BOW EVER MADE????????

@josephporfido2433

5 ай бұрын

What are your limiting criteria? Any ATA or poundage requirements? How about age?

@MegaElkaholic

4 ай бұрын

@@josephporfido2433 no just the lightest carbon bow ?.I already know.

Says this bow shot one second beyond ibo. No bow ever hits iBO speed especially over. That's cap! just check out mfjj,s bow reviews!!

@extremeoutfitters

5 ай бұрын

😂😂

The pins on the uv slider are so dim. I wouldn't buy it for 600 bucks. If you're in a state where you can't use a light, you can't shoot if you can't see your pins in low light. And the mew tight spot quiver comes with a piece to mount in in the riser in the triangle hole that most bows have now, instead of having tonuse the sight mount on the riser ,.in the sight holes. I would have done that instead, but to each their own.

@jroutdooradventures

5 ай бұрын

My tight spot did not come with a different mount. Just the standard bracket for a sight…. Guess you bought one of the Bowtech ones?

Hamsky catch a branch going in the woods with the draw cord your screwed, next problem stabilizer to long same problem,next quiver to expensive for what you get. STOP

@jroutdooradventures

5 ай бұрын

I have used a hamskea for 3 years now going through brush and thick stuff. Never had a problem with it.

@brentbandy3566

5 ай бұрын

Huh? I’d hate for him to catch the string of his stabilizer because it’s too long 🤪 Stop yelling, boomer.

@BlownIntegraGSR

5 ай бұрын

New rubber cable damper gets rid of the spring. No issues

garentee my bow is hotter last yr pse 33.bah!

Just so you guys know you didn't build anything 🤣🤣 the bow was built at the factory all you did was set it up 🤡🤡

@extremeoutfitters

5 ай бұрын

Thank you for the clarification Justin

@jroutdooradventures

5 ай бұрын

Well you see. I went to the factory and they let me build it. I just couldn’t show video for obvious reasons. I choose all the right fibers to make sure it shoots correctly. I even got to run the CNC machine to get all the parts. Then I hand threaded all the bolts and taped everything. I even did it in 1 hour! 😂😂😂😂

@Tripp_outdoors

5 ай бұрын

Bros a dumb ass

@tjblackforest69

5 ай бұрын

Smartass

@chadyoak1633

5 ай бұрын

My exact thoughts! I see all the KZreadrs saying “bow build”. What exactly did you build? You put sights, rest, stabilizer, and quiver on it. I definitely wouldn’t call it a build. But that’s the best way to low key advertise!

Too Much language just in the first minute, if I can’t watch in front of my children I ain’t watching it . Not professional

@Gambino_1776

5 ай бұрын

What the he'll are you watching......lol unprofessional really..........

@luisthisguy9825

5 ай бұрын

Ahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha😂