How do you not have more views , this is the most detailed/breakdown K series build I've ever seen and I watched a ton....I can't wait to use your videos to build my K series :)

@SERGMOTIVEGARAGE

2 жыл бұрын

unfortunately not alot of people like or share the videos, that helps alot! But thank you for your support!

@reignstir

Жыл бұрын

agreed

I’m a former Honda Tech. We use 12 inch magnetic tool holder for holding the rockers. Lay them across the cam journals and flic the rockers up to the holder. Also use some tape on the magnetic side so not to scratch the rockers. Hope this helps anyone pulling their hair out fighting those rockers.

I wanna give you a huge thanks for the tip with the timing tensioner. I had no idea you could physically move it back more and I was wondering why I couldn’t get my tensioner on. You’re the only one I got this tip from. Thank you again!!

Thank you for your videos! You are an excellent teacher and speak intelligently. The attention to detail is most appreciated. Keep up the good stuff.

Definitely appreciate the time you take to go in-depth on this. Well done man 👊🏼. Can’t wait to see all the videos. SUBSCRIBED 💯

I needed this. Bought a Integra last month and will replace timing chain. Never did this before and will attempt to do it without removing the engine. You're vids are great. +1 sub

This is very cool! I'm an amateur car repair guy (definitely not a mechanic) and I love learning about car engines. To date, I've only learned to replace/repair parts around the engine but your video motivated me to take my skills further. I love this stuff! Thanks!

@brandonsalas6552

Жыл бұрын

You sound like s mechanic next step is technician

I know its been years since you made this video but Appreciate your video series sir👍🏾, gave me alot of confidence in getting the timing chain replaced on my kseries engine, keep up the awesome work 🤙🏽🤙🏽

Thanks for the tutorial Serg! Cant wait to see it run. Good job bro

Awesome guide, thanks so much Sergio

Awesome video this really explains what to look out for and how it works

Definitely one of the best Honda youtubers! So detailed and straight to the point with great tips on the side. #SergFTW

@SERGMOTIVEGARAGE

5 жыл бұрын

i really appreciate that!

thank you bro the video is very in depth and easy to understand

I'm a retired toolmaker/machine builder with over 40 years experience and this is the first time I've had the chance to view one of your videos. You use very sound and logical build procedures and for a young man I'm impressed with how you work. I look forward to future Honda videos from you. Keep up the good work. I have an '02 and '07 Honda Civic coupes and look forward to acquiring an '12 to '14 Civic SI.

@williamlevy1981

Жыл бұрын

The 2012 model should be avoided. A 2013 - 2015 Civic Si or 2013 - 2015 Acura ILX are the final versions of the manual transmission high output K24Z cars. The Acura ILX needs a l.s.d. installed. I recommend the ILX for its overall refinement.

Man you went into way more detail. Thank you.

This is so appreciated. I'm putting a K20 in my Fiat X1/9 and I was totally looking for a guide like this. So helpful!

@rigidjunkie

4 жыл бұрын

+1 only with a Fiero!

@blownaway4371

11 ай бұрын

P I C T U R E S !!!!!!!! Your Fiat sounds like it'll be a monster!

@scottweiner9082

11 ай бұрын

@@blownaway4371 Thank you! It's going strong and is a beast :-)

Thanks for going detail by detail on building a k24. Looking at building a k24 for my Ep3.

Thanks for the videos there very informative I have been watching several this morning I'm an old dog looking for something more interesting than the domestic rides I have owned the power to weight very nice.

You always have to remember that without the rockers in place that the valves are completely closed and that the springs can only compress down and never up (because of the keepers of course). So minimal clearance is needed between the heads of the rockers and any other stationary parts of the motor. In this case the design of the K20/24 engine has offset spark plug ports/tubes.

Keep it up sergio!!! Please Keep this Guide in your Channel !!!! Thank you so much for the info !!

@StivenArrieta99

5 жыл бұрын

Those 40min went by so fast

Great content awesome details 👍🏽

This guy knows his sh**t very detailed video thanks for sharing 😊

Love the detail you get into. Keep up the great work. Saw that your already at the track tho. Hope you ran good times.

@SERGMOTIVEGARAGE

5 жыл бұрын

not at the track yet, will be going this sunday!

Great video! Very helpful

AMAZING DETAIL ......

Man sorry if I'm blowing you up dude but I discovered your channel after getting my EP3 and I'm been watching your videos episode after episode until I fall asleep man.

Greatest problem from oil pump cavitation is the excess heat caused by the vapor or as you said "bubbles" which cause hot spots in various parts of the motor. One of the best ways to avoid this is to install an oil cooler thus your oil doesn't run the risk of boiling at the higher temperatures and lose most (if not all of its viscosity).

Absolutely an amazing detail and clear educational explanation!!! Sub earned! 😎

That's funny you said about the marks on the chain not lining up. I asked you in your last timing video about that. And I just broke my crank pulley tonight on my car! Thinking about going with the ATI

Great video!

It must be remembered that the purpose of the chain tensioner is to allow some floating of the chain so the tensioner plunger will more in and out slightly when the engine is running, meaning that the tension on the chain WILL not remain constant, otherwise this would defeat the whole idea of a "chain tensioner".

Pro level Sir!

Great video.

thanks for all the video

Great content, Sergio. I just looked it up and that fail safe kit ain't cheap. That's gotta be close to $1k in mechanical timing parts.

Super informative thanks 👍🏾👍🏾👍🏾

25:32 "When all the stars are line up, that's when you know you are in time " 🤣

thanks good job brother

If that arrow is pointing up on the crank, it can only be at top dead center. This isn't a cam that spins at 1/2 speed of the crank. I understand wanting to be sure, but if the arrow is up, you are at TDC.

Awesome u making this video I just got a better Transmission for my 09 Civic si my 3rd gear set went out was fixing to fix it but got this deal on this Transmission so got it then dropped my transmission and etc and decided since I was down this far I need to do wat I want to do so just got k24a2 switched heads with mine k20Z3 even know this motor only had 43,000 miles on it went with new chain and got whole kit for swap with chain and etc put s2000 oil pump on k24a2 everything bolted back up to car and etc and thank God for k tuner v2 I am going to change out the motor mounts tommorow and I am goin to set my rpm between 7,800 to 8,000 and car felt good but I could fell some of the motor mounts were giving some so that's why I am fixing the motor mounts tommorow. Love how much better the car fells down low on Rpm just cruising

@AllMotorGarage907

5 жыл бұрын

Brandon Green element is k24 same as accord and CRV

@Gregg0112

5 жыл бұрын

Are selling the damaged transmission? I have a 3rd gear set

Just a suggestion. If the failsafe key is not a four way fit to the keyways on the crankshaft and the crankshaft gear maybe it should be to further insure the engine stays in time. That way the key can not roll, plus if there is any side key wear, which normally there is, again the engine will stay in time.

Thanks for 20:40 thanks for pointing out TDC could be 180 backwards. Nobody seems to cover that

on k24 timing the dot is between the chain link and on k20 the dot is under a link.so in a k24 motor(k24 bottom end) there would be 8 chain links between the dots.and i a k20 engine short block there would be nine links between the two dots.i hope his helps some one. so the k20 and k24 have slight difference in getting the timing right.plus the k24 timing chain is longer than k20 because its block is taller than k20. lot of info over net

I wish i had a buddy like you who could help me do my timing chain in my rsx. Ive been trying to find someone to do the timing chain for like a year and i don't trust myself to attempt it.

He said "Cavitate the Oil Pump"... LISTEN to this man.

Excelente my friend

I have the chain guard, K20Z3 longer top guide, Skunk 2 tensioner, and it still skipped two teeth! Don't say it won't skip teeth, because one of two things will happen. The chain will stretch and skip teeth. Or in my case, it will shear off the OEM cam gear teeth and skip. My Skunk 2 cams were the cause, luckily I checked it before it caused any further damage.

Always good videos Awesome channel I so want to come and work together with you sir 🔥🔥🔥🔥

What VTC advance angle are you using on your build? Have you tested piston to valve clearance?

lol, doesnt matter top dead center or not , even if you move it over or whatever then you risk another being at top dead center, your always gonna have one at or near top dead center, but Yes just be careful and dont froce anything ! Damn Buddy you used enough assembly lube to put together 10 heads ! If you got it like that send me some assembly lube ! good video

Hi pal i had a issue with the upper guide...help... see the plastic bit on that upper guide is it ment to rattle about or is it solid fixed in place.

Nice chain shape my guy. Lol!

2 questions.. vtc rattle.. is there a new spring we can get to replace with or need a new vtc. How did you go with the tensioner? You reccomend it? I just purchased a skunk2 one. Yet to be installed

So if I do not put the sealant on the back top of the motor. It will leak?

I have a 90 crx, originally i was gonna swap in a b18 and convert to obd1, I have since changed my mind and decided on a k series, can I still use obd1 or will it have to be obd2? Thank You, Pete Cummins

After getting my crank set TDC the lower chain (gold marks on chain) don’t align with the arrow on top by the arrow? Does that matter?

Whats the part number for the k20a3 upper chain guide

I just snapped half of the plastic under the upper chain guide with the valve cover on the K20A6 EU motor while installing back the valve cover. I guess I can use any kind of K-series upper guide, longer is better, but what are the torque specs on the two bolts/screws that you left loose? You didn't show this in your vid and if you can let me know it will be great. Thanks.

At the 26:00 mark, when you have the two ratchets on the cams, are you loosening and tightening the bolts on each and verifying that they stay in time? Also, what point of reference are you using for the top marks to stay at 12 o'clock?

may be a dumb question but are the cam gears the same ones from the k20 cams or are they the ones from the k24 cams?

What is your total build cost? If you get time after the build is complete you should get a video out with a breakdown of rough price estimates. Optional vs required parts. Would help us budget for these builds. Ive said it before and ill say it again, the detail in these videos are second to none.

Hey am I screwed if I didn’t RTv the rocker assembly on the back of the head. ???😰

Ever use a pin to limit amount of vct so no piston to valve contact ?

Is the lower chain guide better than the stock? And you upgraded your inline pro!! What's it better for ?

so im gonna be doing this to my tsx gonna be interesting

@jorgeguzman2137

4 жыл бұрын

yalman32 I’m also going to build my tsx, Have you started your build?

What cams are you using?

I’ve heard of a couple guys motors going because of that modified crank gear. That long tooth snapped and the rest goes on. Now idk to get the modified crank trigger wheel or stay oem

Does it matter if TDC is set at compression or exhaust stroke?

Please tell me the engine rotation when observed from flywheel end

Really wish he put the links for some of these timing gear saver things can’t find em anywhere

What's your thoughts on ebay timing chain kit for k series?

K24a timing question Hi there , Looking for some clarification before I make a mess of things . I have a K24a3 with out a timing chain when I got it , I want to put a new chain , oil. Pump etc . This is my first small engine and is it as simple as finding TDC like the old days , the reason I ask is in The Honda manual it’s says “ do not move crank without the chain Installed” I have no idea if it has been turned over without the chain or not ? Any advice is most welcome 🙏

When that pointer is aligned with the sprocket on the crank #1 cylinder is up. There is no 180 degrees out. You are referring to the cams in relation to the crank.

@allxdup1909

4 жыл бұрын

yes, I kinda wish people who don't REALLY understand what they are doing, didn't try to teach it.. for readers who also don't really understand yet, it can be another head fuck on the road to success...

I think your last one spun because of may be there isn't big enough oil pressure relief passage to release the oil pressure when it reaches its pick.

great video would it be okay if i used the k20a2 upper chain guide? also what headgasket do you use on k24/k20 im doing a stock block jdm k24a with a prb k20a2 head? thanks again great video!

@JustynConto

5 жыл бұрын

HakimDC2 CRV head gasket for k20a2/z1 heads on k24. Use TSX head gasket for TSX/k20z3 heads on k24s.

Where do I buy the fail safe kit???

Part number for the k20c3 upper timing chain guide?

Is k20a2 head better or z3 on k24a2 block?

Verry good explanation on this type of engine, now I got a question, I have a Honda element and I want to know if this engine is k24 or k20

@akassasin5768

5 жыл бұрын

What year specific model etc.

How bro what’s the name of the timing kit an tensioner kit you got for the k24/k20

Did you replace cam gears or do you have to

How can you run it not knowing the p2v or v2v or claying the motor..? Especially if you’re running a 50 degree vtc

Just want to put this out there the baffle that you put on your engine runs from side to side across the engine which would be the opposite way you would need for it to keep stuff from sloshing around inside I'm just saying

Where did you get that BAFFLE?

Yooo lost the two bolts that go on the end of the rocker assembly. The two that sit under the cam sensor side.. lol what are those called and will any bolt work as long as it fits and goes all the way down.. I like the hardware u have where did u get those!!

Four years later how’s it he build

Quick question. If I forgot to put that bead of rtb on tha back on block when you set the rockers how important is that? Am I fucked? I already did timing and the timing cover already. Please lmk thanks.

THINK OEM T CHAIN TENSIONER WILL BE OK FOR TURBO? IT SHOULD BE OK WITH THE OIL PUMP UPGRADE YEAH

What is the significance of the dot being between the two gold links. I would think it would make a difference. Is it for future when checking to see if timing jump a tooth?

@TruckThisGarage

3 жыл бұрын

Nevermind I think you explained it at the end of the video. Awesome video too by the way man. I’ve watched it 4x’s now

I’m swapping my exhaust valves so this is helping lol

There's no cam bolt specs in the description

33:30 Bro when you said what we are looking for is the marks not the links to line up, does that also apply the oil pump chain?

@SERGMOTIVEGARAGE

2 жыл бұрын

the oil pump/chain doesn't need to be timed, only the crank and cams

What cams?

how has that inline pro tensioner been for you bro? jus installed one on this motor and it was the exact way your was kind of have to force it into its place

@SERGMOTIVEGARAGE

5 ай бұрын

Been running on it for years now with no issues 👍🏽

Serg....What is the upper, longer top-most chainguide from?

@losgorniacos

3 жыл бұрын

Honda k24z3

What camshafts did you end up going with?

@Visionn777

3 жыл бұрын

Wondering this too

Having an issue installing the modified crank gear. Its doing like yours in the beginning , But it stays stiff

@zahiraamir3962

2 жыл бұрын

08:50 it's not wanting to slide on no matter how much I line it up

Aw shit busting labels off them rock auto boxes

timing chain from k24 and oil pump chain from k20 I am assuming? Also, when you ordered the baffle, did you request one made for K20 since you now have the K20 pump?

@losgorniacos

3 жыл бұрын

It is k20 baffle because the k24 pump is 3 times bigger then this k20

@steelontarget

3 жыл бұрын

@@losgorniacos thank you

25:08 if you do everything as explained and still cant get the timing right make sure to get a new timing chain if you are trying to time it with a used timing chain... i almost got brain cancer trying to figure out why i couldnt time that thing, bought a new timing chain and compared it with my used one and found out a difference of 1 tooth being longer from previous owner (he badly raped the engine)... Also want to ask, my engine has being overheated many times and badly in the past but still runs like knew (except oil consumption etc) do you think would be a good idea to rebuild it? I ve heard something that if an engine gets overheated it can get seized... any ideas and tips are welcome :) 28:49 also really important is to have the right side of the timing chain being fully stretched, while having the marks of timing correctly lined up, if you have slack on right side of timing chain this is OUT of timing... cant stress this enough...

@SERGMOTIVEGARAGE

5 жыл бұрын

if the engine has overheated a couple times and hasnt given you any problems yet dont touch it. I would highly recommend inspecting it but only when you are ready because if you tear the motor apart and find the head warped a little then you will be spending a good amount to get it repaired correctly.