⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Mosmatic gun and wand solution: bit.ly/3ovIcPA P&S Brake Buster: bit.ly/3M7lE0S CarPro ReTyre: bit.ly/3Eh3hDZ Detail Factory tire brush: bit.ly/3JOfZet CarPro Reset: bit.ly/3rwa0od Microfiber Madness Incredibrush Flat: bit.ly/3M7NKZF EZ Detail Brush for wheel barrels and fender wells: bit.ly/3JLp73x Boar hair brush for wheel faces: bit.ly/3veNO36 Detailing brush for calipers: amzn.to/3OcBid9 Gyeon WetCoat: bit.ly/3uIevy6 MJJC Foam Cannon Pro: amzn.to/3uLp2IV Bilt Hamber Auto-Foam: amzn.to/3FxWyHp CarPro Descale: bit.ly/3EklBvV MTM PF22.2 foam cannon: bit.ly/3MbfvAu Microfiber Madness Incredimitt: bit.ly/3JRqeOZ EGO blower: bit.ly/3afmfAb P&S Dream Maker: bit.ly/3KMQED9 Dream Maker (Amazon): amzn.to/3Ft5o81 The Rag Company edgeless 300 microfiber towel (applying quick detailer): amzn.to/3EfLVax The Rag Company Eagle Edgeless 350 microfiber towel (buffing): amzn.to/3uHMpD3 CarPro BlackOut: bit.ly/3KM5I3G Roar Coatings ceramic + graphene coating: www.roarcoatings.com/pan 🇨🇦 For people in Canada: Kranzle 1122TST pressure washer: bit.ly/3MgYINZ Mosmatic gun & wand solution: bit.ly/3EBUZbI P&S Brake Buster: bit.ly/3JMdsS5 CarPro ReTyre: bit.ly/3uKgj9D Detail Factory tire brush: bit.ly/36iM9Rz CarPro Reset: bit.ly/3jGs7DN Microfiber Madness Incredibrush Flat: bit.ly/3M7NKZF EZ Detail Brush for wheel barrels and fender wells: bit.ly/37TZOih Boar hair brush for wheel faces: amzn.to/3vjLPdT Detailing brush for calipers: bit.ly/3uLKDAN Gyeon WetCoat: bit.ly/3Oha8BK MJJC Foam Cannon Pro: amzn.to/3JTGGi4 Bilt Hamber Auto-Foam: bit.ly/3uJM4Qq CarPro Descale: bit.ly/38JLVUo MTM PF22.2 foam cannon: bit.ly/3rtjpwO Microfiber Madness Incredimitt: bit.ly/3JRqeOZ EGO blower: amzn.to/3uV6EgV P&S Dream Maker: bit.ly/3OfIBAM The Rag Company edgeless 300 microfiber towel (applying quick detailer): amzn.to/3rwIpDA The Rag Company Eagle Edgeless 300 microfiber towel (buffing): amzn.to/3EjHw6f CarPro BlackOut: bit.ly/3jGKNmC Roar Coatings ceramic + graphene coating: www.roarcoatings.com/pan 🇬🇧 For people in the UK: bit.ly/3QG5qhU 🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below! www.epidemicsound.com/referral/pjuxkd

@KnightRider82

2 жыл бұрын

Did u sell the BMW?

@BaxterretxaB

Жыл бұрын

Can you help answer a few questions for me? Friend of mine recommended me wash my ceramic coated (Adams graphene) Audi with Carpro reset and then another friend of mine said not to use reset as it’s too harsh. Who is correct here? Also I have the carpro reload as well and trying to figure out when is best to apply this or if I even need it. (I purchased reload and reset as recommended by a friend to have on hand to wash my Audi when I get it back from ceramic coating) Love the content.

@PanTheOrganizer

Жыл бұрын

@@KnightRider82 I get a brand new car every three years. :)

It'll be hard to top this Porsche as a replacement. Now I understand you prefer loaded GT type of cars. This one is so unique.

@PanTheOrganizer

2 жыл бұрын

I agree. I don’t know were I’ll go from here.

@MyPaintDoc

2 ай бұрын

@@PanTheOrganizer Koenigsegg next?

WOW! Looks amazing! Another great vid PAN! Great display of products and explanation of what they do. Live your vids, sir!

@PanTheOrganizer

2 жыл бұрын

Thanks! I appreciate it!

The diversity of products on this channel are fantastic Pan. Thank you for highlighting the importance of restoring paint protection because there are some out there that want to blame coating failure when all they need is a proper cleaning. So glad you finally got a chance to try out Dream Maker. The gloss was insane on my red paint when Matt came into town a few weeks ago!

@PanTheOrganizer

2 жыл бұрын

Thanks! I have been using Dream Maker pretty much since it was released. ;)

Great video Pan!!! Short video but with good content I like this way It's better to see little and want to see more than tired of seeing so much... it's my opinion stay on this way

Excellent video Pan! I really enjoyed the process and you are very thorough which is great and then you explain how everything works. This really made the coating look just like day one that insane sheeting and the beads for days. And it brought back that mirror finish! Excellent job all the way around and I always learn something new. Thank you Pan and I hope you enjoy the spring driving

@PanTheOrganizer

2 жыл бұрын

Glad you enjoyed it! Have a great weekend Sam! Did you do the spring maintenance of your ride?

@thesamsquatch5224

2 жыл бұрын

@@PanTheOrganizer I have not yet been able to do the spring cleaning just yet. In ohio the weather changes extremely rapidly but it looks like this upcoming weekend looks to be promising. I've been maintaining mostly with n914 but having this break in the weather should allow me to fully spring clean. I am noticing some masking of the coating like you said but this should help tremendously

@PanTheOrganizer

2 жыл бұрын

👍🏻

Perfection in every detail. Congratulations! We learn from you professional car care. Greetings from Poland!

@PanTheOrganizer

2 жыл бұрын

Thanks Pawel! I appreciate it!

Incredible results. Still looking better than new from the factory.

@PanTheOrganizer

2 жыл бұрын

Absolutely! Thanks!

Great video. Like the way you talk us through the process as you go. I just did my first paint enhancement on our 4 year old Honda van. I followed a lot of your previous videos and the van looks better than when we bought it. I now have friends willing to pay to have their vehicles done. Thanks

@PanTheOrganizer

2 жыл бұрын

That is awesome! Hope you had a great weekend so far Steve! What products did you use for the paint enhancement?

@steveclark2426

2 жыл бұрын

@@PanTheOrganizer I used both 3 d one and turtle wax pro 1 & done. I used various pads on some finicky areas. I took paint depth measurements before and after and only took minimal off. I used the turtle wax to the max wax ( graphene). My next step will be a graphene ceramic coating on my work truck. I find paint correction so relaxing and satisfying. Thanks once again for all your videos.

@PanTheOrganizer

2 жыл бұрын

You can do it!

Congratulations Pan! Very, very good!

@PanTheOrganizer

2 жыл бұрын

Thanks Mauricio!

Shining like a star ⭐️

@PanTheOrganizer

2 жыл бұрын

Shine bright like a diamond! 💎 😎

i love your videos man i just applied adams advanced graphene coating onto a clients car and am very happy with the results

@PanTheOrganizer

2 жыл бұрын

Thanks! I will have a six month update on the Adam’s Advanced Graphene Ceramic coating soon! Stay tuned!

Stunning results, Pan.

@PanTheOrganizer

2 жыл бұрын

Thanks!

Great video Pan, always nice to see you cleaning that beast and it looks insane..amazing stuff👌💣💥

@PanTheOrganizer

2 жыл бұрын

Thanks Mann!!

it's amazing that you managed to keep the enthusiasm about content creating for so many years in a row ...

@PanTheOrganizer

2 жыл бұрын

I appreciate that! I have been detailing for 25 years now, and it's still my biggest passion in life. The reason I started my channel was not only to share my knowledge, but also my passion with my viewers and hopefully give everyone the detailing bug! :)

That is a beautiful color and obviously extremely well maintained.

@PanTheOrganizer

2 жыл бұрын

Thanks! 😁

I have a bottle of CarPro’s Descale added to my supplies. Looking forward to using it. Part of my research indicated the Descale adds in the removal of any remaining finishes, ie carnauba wax and sealants, as well as any fallout. And your car looks spectacular. Nice video.

@PanTheOrganizer

2 жыл бұрын

Your research is correct. It's mainly used to descale paintwork (remove mineral buildup and water spots) but can also help to start the breaking down process of older waxes and sealants. It won't hurt silica sealants like ceramic coatings or silica spray sealants like CarPro HydrO2 or Gyeon WetCoat.

How did I miss this one lol perfect timing 👌 Answered all my questions

@PanTheOrganizer

2 жыл бұрын

Awesome! Great to hear Craig. So you'll be doing a spring maintenance wash soon I assume on your car?

Pan! thank you so much for helping me jumpstart my detailing company, i've learned so much from you and im greatful for all you do ! THANK YOU❤

@PanTheOrganizer

2 жыл бұрын

Thanks! I appreciate the feedback.

@queenatlanta1779

Жыл бұрын

@@PanTheOrganizer any value to adding the rinseless wash prior to auto foam?

Have to say... stunning car.. especially in this colour and with these alloys... not too agressive but still is.. while at the same time very classy.. love it!

@PanTheOrganizer

2 жыл бұрын

Couldn't agree more!

Spectacular Pan.

@PanTheOrganizer

2 жыл бұрын

Thanks Jeff!

Another entertaining video. Very therapeutic. I just wish my garage was as big as that, though!

Another great video Pan. I can’t wait to detail my TLX tomorrow!

@PanTheOrganizer

2 жыл бұрын

Have fun!

Can’t thank you enough for what I have learnt from you the best detailing Chanel on KZread by far only down side is every time I watch I end up buying 👍✅

@PanTheOrganizer

2 жыл бұрын

Thanks Steven! I appreciate the kind words.

@hmmpppsaywhat7878

2 жыл бұрын

Will that include the 911 Turbo S :D

@stevenattwood7308

2 жыл бұрын

@@hmmpppsaywhat7878 if I stopped buying all the cleaning products maybe 🤔 if not the RS is good enough for me ✅

Really beautiful car Pan! You have worked hard for that car💪🏽

@PanTheOrganizer

2 жыл бұрын

Thanks!

the car looks stunning, fantastic video 👍

@PanTheOrganizer

2 жыл бұрын

Thanks Wayne!

Être heureux en voyant un effet deperlant aussi incroyable c'est la vie qu'on a choisit. Merci Pan

@PanTheOrganizer

2 жыл бұрын

Merci!

Another educational video. It's great that You DRIVE Your Car! It's a car! It's meant to be driven. The hydrophobics on that coating are insane! Even before You did the decontamination process, it looked good! I've never gotten crazy with My wheels. I used csl back in October 2020. So far, so good. I'll try some of that wet coat. Thanks for another great video, Pan. It's a washout weekend here in CT, so no car washing. Have a good weekend.

@PanTheOrganizer

2 жыл бұрын

Exactly! Cars are meant to be driven and enjoyed. :)

@J1Z06

2 жыл бұрын

@@PanTheOrganizer That's why My Vette has 112,000 miles on it(I bought it with 812 in August of 2005). If we had weather in Connecticut like they do in Los Angeles, it would ave 200,000 miles :)

Merci! Pan t’es le meilleur ✌🏼

@PanTheOrganizer

2 жыл бұрын

Merci Bob!

Just a gorgeous 911, great job Pan 🙂🙋🏼‍♂️👍🏻

@PanTheOrganizer

2 жыл бұрын

Thanks!!

Nice job Pan beautiful car love the colour

@PanTheOrganizer

2 жыл бұрын

Thanks 👍 It's called "Aventurine green".

Nicely done as always. I followed all your tips and products when I started cleaning my 2020 C8 and now with my 2022 911 Turbo. Thanks !

@PanTheOrganizer

2 жыл бұрын

Congrats on the new Turbo!!!! 😎👍🏻👍🏻👍🏻. What would you say are a few of the biggest differences between your C8 and the 911 Turbo other than the Turbo having much quicker real world acceleration?

@rpazzini9999

2 жыл бұрын

@@PanTheOrganizer Thanks Pan ! You Rock ! Great Queston. So many things. Both are engineering refinement to the nth degree, The non turbo means a lot ! Also the C8 DCT engages right away. I can tap the 911 gas peddle and make it rev without moving. The 911 is a better build but the C8 is multiples a better bang for your buck. I'm keeping my 911. Had it PPF. Glad I did the windshield also bc it already took many hits along with the read quarter panel. The C8 has a much better android integration by far. C8 and 911 handle like on magnetic rails. I like the ergonomics of the C8 better including the square steering wheel. I'm just not a corvette guy always had imports... Q - How can you make the brakes stop squeaking when braking from 20 mph to a stop. Had that with both cars, They say it is a part of owning large brakes. Mine are non ceramic

@PanTheOrganizer

2 жыл бұрын

Yeah there’s nothing you can do about break squeeking on high performance brakes unfortunately. I’m lucky that my carbon ceramics don’t squeak and don’t produce brake dust. :) Oh and those massive ten piston calipers are insane! 😁

@rpazzini9999

2 жыл бұрын

@@PanTheOrganizer I passed on the ceramic brakes (10K + paint blk) bc I am not going to overheat them but big brakes do make a lot dust and it does not want to rinse off with a power washer for a shine. Mom say's the more you have the more you have to worry about. LOL HMD Q -You get no brake dust at all ?

Hi pan great detailing and the way to go about it, it seems to do the job really well. Fantastic demo on the application of the products used. The car ain't so bad either......

@PanTheOrganizer

2 жыл бұрын

Hehe thanks Alan!

Thanks for another great video. Your car is looking so very nice :D

@PanTheOrganizer

2 жыл бұрын

Thanks Pat!

Awesome work Pan as the Porsche looks super glossy and reflective. I do like the idea of attacking both ends of the ph scale in the spring. One surprise for me was how sweet descale is to use in the wash bucket after foaming. There was more lubricity than expected and it completely removed a spray on sealant. I appreciate the honest feedback on the tire coating and I think I will purchase this tire coating to make rinseless washes easier. Finally I was really surprised to see the hydrophobic behavior on the windows. The coating you used is holding up very well. Thank you for the video.

@PanTheOrganizer

2 жыл бұрын

Thanks for the feedback Neil. Yeah that coatings is blowing my mind on all surfaces.

Descale is a really good product i only needed to snowfoam and it removed these light waterspots that was on there. Amazing video Pan, doing everything by the book in my perspective! 💙

@PanTheOrganizer

2 жыл бұрын

Thanks Lapponian!

Absolutely fantastic. What a beauty!! 👍🏼👍🏼

@PanTheOrganizer

2 жыл бұрын

Thank you! Cheers! What's your favourite spring maintenance routine? What products do you like using to refresh coatings?

@ShineYourLightDetailing

2 жыл бұрын

@@PanTheOrganizer Pan, I do a similar spring maintenance as you do, especially aware of corners and crevices that could have various undesirable build ups. Ceramic maintenance I have been steering towards Phoenix EOD Titan or Griots Garage Wash & Coat. Others as well, but both of those have been giving fantastic results!

@PanTheOrganizer

2 жыл бұрын

Titan is a great product!!

Stunning 👍

@PanTheOrganizer

2 жыл бұрын

Thanks Kunal

Great video! The car looks fantastic 👏!

@PanTheOrganizer

2 жыл бұрын

Thanks!!

I did use the information here along with the Apex Metal Oxide 1 Year update. The coating used on my Chevy 2500HD is GlassParency Graphene. The foam steps were Bilt Hamner auto foam, then CarpPro Descale foam then Descale in the contact wash with great results. 100% DI water for mixing and rinses. Finally Optimum products for tire cleaning and dressing - I get great results with the Optimum line - typically clean the tires 3 to 4 times though. My detailing arsenal is 'Pan Approved' lol. Thanks for the great work and the insights to great products and techniques.

@PanTheOrganizer

Жыл бұрын

Thanks for sharing Guy! And thanks for the trust you place in my videos and information.

Thx for the video. Would have been great to see the water behaviour before applying all these products on the panels.

Extremely well-presented and informative video! I’ll be entering the world of Porsche and want to ceramic coat the surfaces to protect the paint. I like this video’s focus on rejuvenating after a Montreal winter. They’re just the saltiest and messiest and borderline depressing to experience lol. Well done, Pan! Would love to have you detail my car post-delivery next Summer. 🎉

@PanTheOrganizer

Жыл бұрын

Thanks Natalie! Which Porsche are you getting? It will be a life changing moment for sure!

@natalielynch9833

Жыл бұрын

Hoping to lock in my build soon on a 2023 Macan GTS… in Jet Black metallic. Am I crazy for going with this colour!? My other choice was Volcano Grey. Both exterior paints would be paired with the stunning Bordeaux Red leather (not extended) interior.

Great video Pan, awesome content. Could you do a video on working out PIR / ratios, I know it may differ but handy to see!

@PanTheOrganizer

2 жыл бұрын

Thanks!

This spec is just 👌

@PanTheOrganizer

2 жыл бұрын

Thanks David!

Porsche is looking fantastic Pan 😎

@PanTheOrganizer

2 жыл бұрын

Thanks Kevin!

Another great video Pan! , the Porsche looks as good if not better than the day you got it 🤤🤤

@PanTheOrganizer

2 жыл бұрын

You got that right!

Great video Pan, your porsche looks like new again, I can't believe it's been one year since you bought it 😎😎👍👍

@PanTheOrganizer

2 жыл бұрын

Thanks! And in person, you would say it looks better than new.

Beautiful car Pan looks Amazing👍👍

@PanTheOrganizer

2 жыл бұрын

Thanks!

Great 👍 video! Such an awesome car!

@PanTheOrganizer

2 жыл бұрын

Thanks Michael!

It looks like gold!

@PanTheOrganizer

2 жыл бұрын

:)

Beautiful car mate you deserve it well done

@PanTheOrganizer

2 жыл бұрын

Thanks! 😁👍🏻

Great video…awesome car😍

@PanTheOrganizer

2 жыл бұрын

Thanks Jonathan!

What a beautiful car. So silky

@PanTheOrganizer

2 ай бұрын

Thanks. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZread as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

Just did my 1st wash I have PPF and ceramic pro … it looks good !! I use the ceramic detailer at thee end and it looks killer gloss !!!! It’s the best top coat ever !!!

@PanTheOrganizer

2 жыл бұрын

What ceramic detailer are you referring to?

@mach183

2 жыл бұрын

@@PanTheOrganizer oops 😬 sorry the meguirs ceramic detailer .. I also used the geon wetcoat as well what’s your favorite ??

@PanTheOrganizer

2 жыл бұрын

WetCoat

Merci Pan

@PanTheOrganizer

Жыл бұрын

😁👍🏻

Great video

@PanTheOrganizer

2 жыл бұрын

Thanks Zacharie! How did you discover my channel ?

Beautiful car Pan

@PanTheOrganizer

2 жыл бұрын

Thank you! :)

Great video, Pan, thanks for sharing, will definitely use some of the products and techniques on my own ceramic coated vehicles! The Porsche looks fantastic!

@PanTheOrganizer

2 жыл бұрын

Glad it was helpful!

Super useful to maintain my Graphene Infused Advanced Ceramic Coated Model Y. Thank you so much Pan! 🏆

@PanTheOrganizer

2 жыл бұрын

Thanks!!

Thanks!

@PanTheOrganizer

2 жыл бұрын

😁👍🏻

I subscribed to your channel quite some time ago and greatly value your episodes. I wanted to convey a situation that leaves me scratching my head. My car Is new three months old and driven very little. I immediately upon car delivery of the car properly applied Adams advanced graphene/ceramic coating. I recently had to have some work done on my car. Unfortunately it sat in there parking lot for days. I found myself with water spots when I picked it up. The process I used to get rid of the water spots was to was to, spray it with McKees N914, then rinse the car, then use foam cannon and then I washed the car. I definitely felt like after the wash the car was very clean. I then used a chemical guys water spot remover. The purpose of this comment was some information that you might find interesting. The pad that I used in the application of the water spot remover when finished was very dirty. I am baffled as to why what I thought was a very clean car, why I would have so much discoloration on the pad. I welcome your thoughts.

@PanTheOrganizer

Жыл бұрын

Yes there is often lots of embedded contamination in the clear coat that the naked eye can’t see. So even after a regular wash, the car might appear clean but in reality still has contamination, hence the chemicals used for decontaminating the surface. Welcome to my channel. You discovered one of the biggest car detailing channels on KZread as we surpassed 810,000 subscribers and 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

wow awesome car man i love this car.

@PanTheOrganizer

Жыл бұрын

😎👍🏻

Great video and what a great spec on your 911

@PanTheOrganizer

2 жыл бұрын

Thanks!

Fantastic!!

@PanTheOrganizer

2 жыл бұрын

Thanks!!

Its about that time for sure my bru!

@PanTheOrganizer

2 жыл бұрын

😁😁😁

@P4SDetails

2 жыл бұрын

@@PanTheOrganizer hope things are dope up North bru.

Love the demo! It really helps! When you say maintenance is all of this a routine you would use weekly? I assume you have to decide if you need to reapply certain things like tyre sealant. But curious if maintenance products like descale would be used every week (or if it’s safe enough) or more like once in a while. No road salts where I live but the car does sit outside so I do notice slight water spots on my ceramic coating!

@PanTheOrganizer

8 ай бұрын

This is not a weekly maintenance regimen! Hence why the title is "SPRING MAINTENANCE". These are pretty strong chemicals and you only really need to use them once every other month, or perhaps once per season if you take good care of your car. For regular weekly washes, a pH neutral snow foam and pH neutral soap is all you need. Descale is only to be used "as needed", meaning when you have mineral deposit accumulation, or if you wand to strip an older wax. For regular weekly washes, I use CarPro Reset, which is made for regular maintenance. See how I wash my car each week in this video: kzread.info/dash/bejne/imSh1dOen92qcrg.htmlsi=Y-HQqwS6FOmbfdmR

Pan, that's a no doubter line up of products right there! The stand outs, well their all stand outs if we're being honest, but Retyre and Bilt-Hamber Auto-foam REALLY stand out. Don't know alot about that paint coating but I'm sure it's great! I'm doing a similar detail during the Memorial Day weekend but my ceramic costing will be Gyeon Q2 Pure EVO, can't wait to do it❗️❗️

@PanTheOrganizer

2 жыл бұрын

Very cool !! That Pure really gives a candy like gloss! But keep in mind it's a bit harder to remove. Feels more tacky and sticky. You'll go through many first removal/levelling towels with it. But it's super easy to apply and has a long flashing time.

@klasseact6663

2 жыл бұрын

@@PanTheOrganizer I'm going to do one panel at a time, let it set up for about 7 minutes and use 3 towels to remove. I have many AMMO Frothe towels that I don't use anymore and they are a shorter pile, blue and orange colored. The last towel will be the final buff towel. I've gotta pay attention to pollen season here in Chicagoland but let me ask you this Pan. Starting with an ultra clean surface, when I apply/remove the Pure EVO, does it matter if the pollen accumulates AFTER I've leveled it🤔 Btw I'm working outside as I don't have a garage, thanks Pan!

@PanTheOrganizer

2 жыл бұрын

EVO lone is perfect for those who don’t have a garage. Very “exterior friendly”.

Thank you for the video! I have had issues in the past applying Gyeon Wetcoat to the wheels and then applying a water based tire dressing like VRP. It seems like this would be an issue but I haven’t seen it mentioned yet.

@PanTheOrganizer

2 жыл бұрын

I never had issues.

Just WOW

@PanTheOrganizer

2 жыл бұрын

Thanks Mike!

Pan , Down South some say, “ Hey all Watch this” ! Could you give us one of those after you tell us the 10 different chemicals your about to use! ? Almost like , watch the paint run right off the car! 😂🔥 love the videos you make ! Thanks.

@PanTheOrganizer

2 жыл бұрын

Haahahah thanks Bob!

Un autre bon vid panner..

@PanTheOrganizer

2 жыл бұрын

Merci! Hope you’re doing well Dan!

Pantastic!

@PanTheOrganizer

2 жыл бұрын

:)

Spring video is here, thanks @Pan! Though in the step process, where would you recommend the Iron remover to be done (for us regular brake guys) ? 😂

@PanTheOrganizer

2 жыл бұрын

Like I said towards the end of the video, you would do the iron removal step after all the washing steps. You pre-wash, wash, iron remover. :)

It’s amazing how people put effort to maintain their paint. It’s more sophisticated than my skin care.

@PanTheOrganizer

2 жыл бұрын

Absolutely. And it’s a passion. Detailing is soothing and relaxing for my viewers and I.

@franksun4017

2 жыл бұрын

@@PanTheOrganizer love it, man!

Excellent tutorial pan, and yes Spring has finally sprung here in Canada. 🇨🇦 Porsche is looking amazing. I have a question for you, how would you compare p&s dream maker to xtreme solutions topper in terms of pure gloss? Tks John.

@PanTheOrganizer

2 жыл бұрын

Dream Maker takes the win for gloss. It only lasts about a week, or up to your next wash though.

Beautiful Car.

@PanTheOrganizer

2 жыл бұрын

Thanks Delaney! How did you discover my channel by the way?

@dgrimes34

2 жыл бұрын

@@PanTheOrganizer You tube search, Been watching for a while you are my go to for the latest and greatest info.

@PanTheOrganizer

2 жыл бұрын

Thanks! Welcome to my channel. You discovered one of the biggest car detailing channels on KZread as we surpassed 750,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

Excellent video sir! Watched it about 3 times and learned something new each time. I was curious if the Bilt Hamber and Descale can be used in a pressure sprayer, as I unfortunately don’t have access to a proper pressure washer setup at the moment. Any thoughts would be greatly appreciated : )

@PanTheOrganizer

6 ай бұрын

Yes you can use them in a foaming pump sprayer.

Hello Pan. Thank you for the great content. I really appreciate it. I feel like I have gone from having a general idea to realizing I knew so little. Thanks to your videos and content I am now much more comfortable washing and maintaining vehicles that I am even offering to wash other peoples cars because it is fun and the results are AWESOME! Thanks again! I did have a question if you have the time to answer. I am a fan of Chemical Guys Hydro Speed. I use it as a quick drying agent for my all my vehicles. Both cars have a ceramic coating so a weekly wash with this in the end seems to keep it buttery smooth and maintained. Do you have a comparable product or item you prefer? Thanks again!

@PanTheOrganizer

2 жыл бұрын

Thanks for the kind words Thomas. Much appreciated. Welcome to my channel. You discovered one of the biggest car detailing channels on KZread as we surpassed 750,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. To answer your question, there are tons of drying aids I prefer over that one. I made a video for my favourite drying aids here: kzread.info/dash/bejne/gIOIsMedYJfeiag.html

@entertheFinn

2 жыл бұрын

@@PanTheOrganizer Thank you Pan for the quick reply and info. Ill watch that video today.

"So you can subscribe to my button." 🤣🤣🤣 you're the best, Pan.

@PanTheOrganizer

2 жыл бұрын

LOL The joys of filming unscripted! Glad to see you made it until the end of the video Josh! ;)

Super video Pan. It was cool to see the ceramic coating fighting off the soap when you did the contact wash on the car's hood. Keep up the great work.

@PanTheOrganizer

2 жыл бұрын

Glad you liked it!

How does using the varied PH chemicals here compare to some of the decontamination vids you’ve done with iron remover and tar remover? Are the substitutes for each other or something you’d do at different intervals? Thanks love the vids!!

Absolutely amazing work Pan! That water beading and sheeting is insane😱. I hope that temperatures start to go up here in Finland and I finally get to ceramic coat my car. I'm so exicted to try out my very first coating😁.

@PanTheOrganizer

2 жыл бұрын

You can do it!! What temperatures are you having right now in Finland by the way?

@KonstaNykanen

2 жыл бұрын

At the moment around 10 degrees celcius😬, colder than typically this time of year over here in Finland. Thankfully I have a garage with heating at my disposal, so my car is safe from the elements🙏🏻. Unfortunately it's raining as we speak, but the weather is getting warmer in the next couple of weeks and the rain is also luckily giving in🙏🏻. How is the weather in Montreal by the way? Although you have an incredible garage where you can detail cars whatever the weather🤤

@PanTheOrganizer

2 жыл бұрын

It’s 18C now during the day, but it was near freezing at night. Thank god for my garage! :)

@KonstaNykanen

2 жыл бұрын

@@PanTheOrganizer Much warmer than here, but thankfully summer is coming☀️

Hey Pan. I just purchased the Car Pro Reset. How much Reset OZ to Water ML in the foam cannon ? Also can I use this for every wash ?

Great video! Did DreamMaker or Beadmaker work well on your ceramic coated vehicles? Did it reduce the beading or self cleaning? Thx!!

@PanTheOrganizer

8 ай бұрын

It works super well for gloss and slickness, I absolutely love that mix. But like any topper you are applying, it will likely alter the properties of the protection underneath. It's normal. No topper has the same high end performance as my range topping ceramic/graphene coating. That is to be expected. But I don't mind it, as I really enjoy the look and feel of the Bead Maker and Dream Maker mix. And it only lasts 3-4 weeks at best, so it's not there for long term protection anyways. I know the coating that is there will last for years, it's doing its job. The topper on top is to maintain the protection and boost gloss and slickness. Play around and experiment with different toppers until you find one that suits your expectations.

@user-bf6go9nf6g

8 ай бұрын

@@PanTheOrganizer Thanks Pan! What is the idea ratio of Beadmaker to Dreamaker for the mix?

@PanTheOrganizer

8 ай бұрын

I show how to make the mix here: kzread.info/dash/bejne/pquptsZrhrHSqNo.htmlsi=nUlhNeCVZ4ReANxk

Thanks for this new video ! How so you wash a window which is ceramic protected ? Can Clarify damage the coating ?

@PanTheOrganizer

2 жыл бұрын

Same way as you would for an unprotected window. Same products. Automotive glass cleaners like Clarify will not damage the coating.

Finally a video less than 30 minutes long

just gorgeous. biting my lip looking at it.. wow

@PanTheOrganizer

2 жыл бұрын

😎😁👍🏻

Pan, I've been a loyal follower; love your work!! I have a question do you use the Bilt hamber auto foam for your weekly wash or do you use a ph neutral shampoo?

@PanTheOrganizer

Жыл бұрын

Hi Lou! Welcome to my channel. You discovered one of the biggest car detailing channels on KZread as we surpassed 860,000 subscribers and we have almost 110 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. For weekly washes, I use pH neutral shampoos. No need for high pH ones like Bilt Hamber. If you want to use that weekly, make sure you use the weaker 2% PIR ratio.

Pan, your car is gorgeous! You must be as nervous as a long-tailed cat in a rocking chair factory when you drive your car around town! Do you park it away from other cars in the parking lot when you go to a store? Great video as usual!

@PanTheOrganizer

2 жыл бұрын

Thanks! I avoid driving in big cities with it. Never park it in the street. And in parking lots, pick my spot carefully.

Great video, I have a coated car which I will try the reset. Would you use the same wash protocols on a car with a full PPF or would you treat it differently? Perhaps a video on cleaning a car with PPF? I do find contaminates embed themselves in the film which gives me peace of mind that the film has protected the paint, but at the same time it is frustrating cleaning a PPF car as the surface is hard to get smooth because of these contaminants

@PanTheOrganizer

2 жыл бұрын

The same methods and procedures apply for a car covered in PPF. Ideally, you would have a ceramic coating on top of the PPF for the best of both worlds. I made a tutorial on that here: kzread.info/dash/bejne/aYZ3ydOdd9XcoqQ.html

Pan the organizer what product can you use to clean navigation screen in cars that you recommend? Thanks great channel

@PanTheOrganizer

2 жыл бұрын

Hi Efren. This product is perfect for navigation screens, piano black plastics, and pretty much all interior surfaces (for cleaning): bit.ly/3M0sh5m

Could you suggest some alternatives for the topper that have some protection instead of the dream maker

I love how you can get a vehicle looking better than when it’s in a dealership showroom!

@PanTheOrganizer

2 жыл бұрын

Hehe totally!! It looks sooooo much better then when I took delivery. When my sales rep saw the video of the detailing steps we performed on it, he was like 😱😱😱

How can I subscribe to your button?🤣 At the end of the video... Don't be mad at me, it was just funny... Love your channel and almost every video you make ❤️❤️❤️

@PanTheOrganizer

2 жыл бұрын

🤣🤣👍🏻

Hey Pan :) Do u have a video where u explain best situations to use high/low PH products? Thxxxxx

@PanTheOrganizer

2 жыл бұрын

I explained the situations in this video. ;) Typically, the more alkaline pH snow foams are to help remove grime, traffic film and grease. The more acidic pH shampoos are to help remove mineral deposits and water spots. But you don't use those for each wash. Only on "as needed" basis. For regular weekly washes, continue using a quality pH neutral shampoo.

@Don-MiDo

2 жыл бұрын

@@PanTheOrganizer thank you ❤️

@PanTheOrganizer

2 жыл бұрын

Welcome to my channel. You discovered one of the biggest car detailing channels on KZread as we surpassed 750,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

Amazing video! Always good to get more knowledge! Reset is amazing to declog the ceramic! What shampoo would you suggest using in between the decon washes. As I’ve been told using reset for every wash, isn’t good. Cheers

@PanTheOrganizer

2 жыл бұрын

I use Reset for every wash, it's a perfect shampoo for regular washes. I wash my car twice weekly. I have been using it for years on coated cars, that's what it's designed for: regular washes of coated cars. It will not damage the coating. The shampoo you wouldn't use for every regular wash is something like CarPro Descale. That's only for when you see the hydrophobics diminish, or accumulation of minerals or water spots.

@TomSaulTv

2 жыл бұрын

@@PanTheOrganizer Thanks Pan. Much appreciated!

Could Adam’s strip wash be used instead of the Bilt Hamber for a presoak since it also has a higher pH?

Hey Pan, The shine on your vehicle resulting from your spring clean-up is just awesome....I need your help/guidance. I detail cars, yesterday I did a 2021 MDX that was previously treated with ceramic. I struggled to get watermarks off at the end... Any suggestion on what I should/could do?

@PanTheOrganizer

2 жыл бұрын

Did you use any of the products in this video, such as CarPro Descale? It's made for that. And if there are still water spots after that, use a dedicated water spot remover like this: bit.ly/393Sx0d If there are still water spots, that means they etched through the coating and potentially through the clear coat and polishing might be needed at that point.

@edmondmartin9004

2 жыл бұрын

@@PanTheOrganizer Thanks for the follow up. I do not have these products but I will be ordering them right away. I was hoping for some homemade recipes that do not always revert to chemicals. Thanks again.

Great Video as always. Will high ph soaps degrade ceramic coatings over time?

@PanTheOrganizer

2 жыл бұрын

If you would use them multiple times a week for many months straight, you could perhaps start to weaken weaker coatings. But for regular use, absolutely no problem. True coatings (in glass bottles) have a very high resistance to chemicals and aren't affected by the soaps in this video. We're talking about a once a year spring maintenance here, or once every other month type maintenance if you see traffic film or mineral buildup. For regular weekly washes, I use a pH neutral shampoo.

Hi Pan, informative video thanks, question: with the carpro descale, and the other decontamination steps will remove a sealant? I don’t have a ceramic coating , I have TLC2 as my protection, will it remove that ? Also can you give your recommendation on a water spot remover, thanks !

@PanTheOrganizer

2 жыл бұрын

It will not remove ceramic spray sealants like TLC2. You are fine.