Many of you probably know Synology as a manufacturer of NAS, or Network Attached Storage. Ultimately, this is nothing more than central storage in a network. In this case, presumably your home network. With QNAP and Synology, there are two big players, but Ugreen is making great strides in trying to get a foot in the door here too. Especially because the cloud is becoming increasingly important and these systems can now offer a private cloud, so to speak.
To start with, Ugreen is offering 2-bay systems, i.e. for 2x 2.5 or 3.5-inch hard disks, as well as 4-bay and even 6 or 8-bay systems, which, however, are priced out of the budget for home use. However, the three variants with up to 4 bays are quite different. Here you get very good equipment for comparatively little money. While the DXP2800 and DXP4800, i.e. the 2 and 4-bay variants, can also accommodate 2 M.2 SSDs, the DXP4800 Plus even comes with an SSD as a system hard disk. Furthermore, the processors differ from N100 in the smaller variants up to a Pentium 8505 with 5 cores. All devices are supported by expandable 8 GB DDR5 RAM. The connections range from a 2.5 GbE to 10 GbE and from USB 2.0 to USB3 Gen 2. The memory card reader is reserved for the 4-bay systems, while the 4k@60Hz HDMI port benefits all devices.
As you can see, there is some powerful hardware available to cover you and your NAS needs.
But the software part will be much more exciting, because installing good hardware is one thing, but support from well-integrated and, above all, mature software is even more important for a device like this in my opinion.
We are therefore looking at both the hardware and the current software status of the app and the web interface. However, a lot will probably happen in the weeks following the release, especially in the software area.
Enjoy the video...
And as always, this video was created in German.
If you have any questions, criticism, comments or problems, please write to me in the comments. I try to answer everything to the best of my knowledge and belief.
▬▬▬ Content ▬▬▬▬
00:00 Intro
00:40 Fact check
03:50 Unboxing - We unpack
07:17 The hardware of the DXP 4800 Plus in detail
10:12 UGOS Pro - Current system software March 2024
12:24 Backup - Software
14:34 Photos / Smart assistance systems - AI photo recognition and co
16:53 App - Software version March 2024
20:45 My first impression of the Ugreen NASync DXP4800+
▬▬▬ Transparency ▬▬▬▬
This video was supported by a temporary product loan from the manufacturer.
▬▬▬ A beer for the author ▬▬▬▬
If you liked the video and would like to buy me a small or large beer, you are welcome to do so via Paypal ➡️ wlt.link/SpendePaypal
▬▬▬ Manufacturer link ▬▬▬▬
Ugreen NASync DXP4800 Plus ➡️ kck.st/4cwojin
▬▬▬ Referral links ▬▬▬▬
Alternatively, here are the corresponding links to the products:
Ugreen NASync DXP4800 Plus ➡️ kck.st/4cwojin
The above links are so-called affiliate links. If a purchase is made via such a link, I will receive a small commission. There are no additional costs for you. Where, when and how you buy a product is of course up to you.
Thank you in advance for any support
▬▬▬ Business inquiries ▬▬▬▬
For business inquiries, you are welcome to use the e-mail address provided here on KZread:
○ wlt.link/Business
For business inquiries, please use the email address that is stored here on KZread:
○ wlt.link/Business
▬▬▬ Hashtags ▬▬▬▬
#Ugreen #UgreenNASync #NASync #NAS #UgreenNAS #NAS Server