This is the kind of guy I need at my local gun shop. Instead I get the big top circus tent shit show complete with clowns & trapeze artists.

@427SuperSnake1

2 жыл бұрын

I think that’s what most get. Most of them don’t even know what they are selling…

@concernedcitizen2898

3 ай бұрын

Clowns can be hard to work with at first but eventually the makeup, nose, and hair come off and they sometimes work out in the end.

Bought one when they first came out in Their DLC. Had an issue with 2 lugs around the extractor sheering off after 700rnds. Called them and the immediately shipped a new one to me free. Had it within two days. They explained they had a batch with bad heat treating. Great customer service. Have 3000rnds plus through that rifle now without issues. I recently ordered another one last week for a new build awaiting its arrival. Very smooth finish, easy to clean.

@SlickSlack4pac

3 жыл бұрын

@@deplorabledave1048 agree on the Toolcraft with DLC, unfortunately they are hard to find these days.

@SlickSlack4pac

3 жыл бұрын

@@deplorabledave1048 rather than dumb luck I would say smart move! I'm glad I bought when I did picked up my 6920 in 2014 and my SAM7 in 2016.

@tomboysupremacist

3 жыл бұрын

@@Hammer.Paladin how is the wear? I heard that if you buy new barrels, you should get a new bolt to go with it since they wear together. Still, 8300 rounds per rifle per year is more than can be expected from most rifles. I'd say SRC more than outdid themselves with these BCGs.

@robertalford1321

2 жыл бұрын

Way back when, (I now think) I caused my own problems with one of them using a different rifle, and I contacted SRC and provided pic of the bolt with excessive, premature wear on the lugs. They asked me to send the bolt back, and they overnighted me a new bolt, no hassle. I now run that original DLC bcg in a FN barelled PSA, and it is a gem. Never had one hiccup since, and some of the best customer service I've ever had from any company.

@fook-joby-den6172

2 жыл бұрын

People seem to shit on SRC BCGs regularly yet, besides the single heat treating issue with one of the initial batches inside the first 6-8mo of production I have yet to see a single issue with a bolt breaking on these. As TBH I had two I kept around for spares and only put a few hundred rounds through them before selling.(I have some OCD-ISH Tendencies & any rifle I build I try to use one manufacturer for the Barrel/BCG/Receiver Set/Rail)

I bought the top one for an AR build. The gas key either was out of spec or had a burr in it. It would lock up on the gas tube and would not cycle. I took pictures and video as proof thinking Sharps would want proof.. When I emailed them about the issue they asked me to send the old one back and they said they no longer make the NP3 ones. So the one they sent me was the bottom one which is the Xtreme Performance Bolt Carrier Group with a DLC. That was 3 years ago and no issues at all. Great customer service.

Wow. Very educational. Thank you for making this video. It gave me a very good understanding of what to look for in my bcg's. The ones I currently own and for the ones I buy in the future. Thank you. Love your channel, expertise and knowledge.

I've been really happy with my XPB, only a few hundred rounds down range so far, but no issues, clean ejection and seems to be breaking in well. Thanks for another great and informative video.

That was an amazing video I subbed and thumbs 👍. I love the honesty. Great job.

Very informative. As a former soldier and obviously not an armorer, I learned a ton from this video.

My NP3 BCG came with an out of spec (short) firing pin that had intermittent primer ignition failures. They sent me a replacement and the same problems happened. I replaced the firing pin with a BCM and it’s been perfect ever since, not one problem, even with crappy weak Tula .223. Great video.

@xsleezerx2083

8 ай бұрын

3 years late but I only run BCM firing pins

Your videos are very informative. Keep up the awesome work!

I've had the BCG that came in my M&P15 Gen1 since 2011 and aside from replacing gas-rings, cam pin and extractor it's been running perfectly fine.

I had the firing pin corrode (pitting) after being left uncleaned in a rifle for a year and 2000 rounds. Probably had some moisture get trapped in with the carbon fouling. I'd call that abuse, but it worked perfectly. Sharps sent me out a new firing pin immediately.

I had them for years, and just bought one a few days ago and has arrived today, January 3 -23 they’re outstanding BCG’s . I’m also a volume shooter. Seriously, you’ll be very happy with this. There’s plenty still well and alive and in business and are actually moving to Virginia and they have a lot of products out there fully operational company in great shape.

@30Cal-Cam

Жыл бұрын

I'm planning to grab one within the next few days

@CaptGus

11 ай бұрын

@richardmangus8776 i’ve had three of them and I’ve never had one problem with them anyway shape or form

I run an SRC bolt in my 450 bushmaster. I believe they're the only company offering a "tougher" bolt for a 450. So far it's surviving my reloads, so it must be good. Really really like the DLC finish, it holds oil yet carbon just wipes off.

I had them in another rifle about 2018. It was great didn't have any issues. I got one just last year for another build that I did to replace the other one. Have not had any issues. Both of them were used in conjunction with the echo trigger.

As of June 2020 they are still around and with good customer service. I have been running one for a few months now really like it, reads I haven'r had any issues. I do like the S7 steel they use. It actually is superior to C158 in strength and toughness, unlike 9310. Really like seeing the methodical thoroughness of your approach.

@tomboysupremacist

3 жыл бұрын

I think corona and all the other events of 2020 and 2021 really have kept them afloat, they're doing business like nobody's business

Sad to hear some have had problems with SRC. My DLC BCG has over 11,000 rounds in my ADM UIC Carbine and running strong with no problems. Also, the Sharp’s Relia-bolt in my DMR/SPR has been running strong with about 3,000 rounds. Haven’t had any problems, so see no need to change them.

@davidschlarp1606

4 жыл бұрын

From what I understand they had a bad batch with heat treating issues along time ago

@crebz5907

3 жыл бұрын

Sooo glad to hear this I just picked up one last week.

@andrelopez7589

3 жыл бұрын

@@crebz5907 does your bolt feel loose? I mean not compared to my Right To Bear phosphate that hardly moved at first, but SOTAR did say the bolt came out a bit too easily here.

@crebz5907

3 жыл бұрын

@@andrelopez7589 It is not loose thanks for reminding me to look at it.

@tomboysupremacist

3 жыл бұрын

@@andrelopez7589 i have never seen a phosphate that wasn't a little tight. Phosphate is rough man. DLC and nitride are silky smooth comparatively.

Had one and sold it. Didn't have any problems. I will say that black dlc finish is one of the most durable I've seen on a bcg.

@madeintexas1213

3 жыл бұрын

Why did you sell it?

My nickel boron version has gone through a 1000 rds plus in a 10.5” barrel through many different types of ammo. Great bcg, coating holding up nice

So I actually have one of these in a BCM rifle that has about 12k rounds on it. Oddly enough I sort of ended up purchasing it because I couldn't find almost any other decent BCG in stock. I mean some of the standard Brownells options were available but nothing from Colt, BCM, Daniel Defense or any alternative high quality brand was in stock. It goes without saying this time frame was within the Covid-19 chaos and that didn't help. So I picked up a Sharps extreme performance bolt and carrier group finished with silver NIB-X. Honestly I went with the slightly more expensive silver NIB-X just because I like the color contrast in a all black AR. I didn't really know what to expect because there were reports from several years ago that they had some heat treating issues but from everything I read Sharps fixed this problem quite a few years ago and there wasn't really any negative stuff about their BCG's since, at least nothing I could find. As soon as I received the BCG it went straight into my BCM and I can truthfully say I haven't had any issues with it in over 12K rounds. With that said it is getting close to needing some gas rings.

@Hammer.Paladin

Жыл бұрын

I personally have 17 AR-15's and 4 AR-10's with the SRC BCG in the DLC "man that's a lot of 3 letter names LOL" and most of them go to summer camp and are fired by an average of 350 kids every summer. I have never had a failure, the DLC coating is still 98% intact and I've replaced gas rings on several after approximately 15,000 rounds. And on a couple I've replaced barrels. Now I have ALL my barrels cryogenically treated and I am at just under 45,000 rounds through it and no issues. Of the 17 AR-15's 9 of them are 25/45 Sharps, 5 are .223 Wylde, 1 is a 300 Blackout, 2 are 9mm Luger. My AR-10's are 2 x .260 Remington and 2 x 308 Winchester. The only thing I have the I changed are the cam pins on all of them. They all "15's and 10's" have the Lantac cam pins. They are pretty darn nice. I have 5 adult children and most of them have at least 2 Sharps 25/45 AR's and several other AR's but all have the SRC BCG's in their builds. None of us has ever had a failure. So I'd say that SRC makes one heck of a great BCG and barrels. That 25/45 has turned out to be the absolute best varmint and deer and hog cartridge I've ever used. Fast, accurate and incredible knock down power. I only wish their BCG and cartridge would have been my idea. Genius. Sorry for such a long comment but I'm getting really tired of people shooting off their mouths without and validity behind them. I don't care which product you purchase, ALL companies have screw up and Sharps is no different. And like ALL GOOD companies they stand behind their products and do the very best they can to take care of their customers.

@joshuabruce9920

Жыл бұрын

​@@Hammer.Paladindon't apologize, that's great info. Do they know you have that many rounds through their bcg? They might want to buy them back for r&d. I'm sure they do their own torture testing but you never know. They may really appreciate the feedback.

Great video man! I just bought the DLC. And for the price, i'd say money well spent.

Love my sharps bcg. Their customer service is top notch also.

Kotaboy32 recommended you and I’m glad he did. Very informative video. You have earned a new subscriber 👍🏽

@marcgonzalez9547

3 жыл бұрын

Dropping Knowledge like a Boss ThankU

I bought three of these a few years ago and they're great. Got one recently not long after the bankruptcy and not only does it look like it's made of potmetal but it strikes my gas tube when going into battery.

@ethanlorton8568

3 жыл бұрын

When was that? I just ordered one two days ago haha

@ethanlorton8568

3 жыл бұрын

@Karol D mine looks nice, I'm pretty happy with it

Wow this was an interesting video way over my head but I see how I would help determination of which carrier to buy

As always. Thanks Chad.

Wow- I am so glad I came across these videos. I was happy to see that geissele’s bcg came out well. I want to buy one when they run their Memorial Day sale.

Several years ago, I had 4 new rifles that were malfunctioning. Checked everything…and found the gas keys had been staked, but were not fully tight…so now I always put an Allen key on all new bolts just to make sure, then re-stake if needed.

They are still in business. Just got one in about a week ago. After watching a ton of videos and reading articles I'm happy I chose Sharps. The S7 tool steel Sharps uses being so much stronger than the 158 carpenter steel most others use would of been something to add to the inspection. Over great work

Great video sir! I was looking at this BCG for a bit, and you helped with making an informed decision. Just curious, what is your camera set up?

I noticed when Chad got to the BCG headspace check, he began with the .223 GO gauge, followed by the 5.56 GO gauge. When both bolts passed the GO gauges, he proceeded straight to the FIELD gauge; thus, skipping the NO-GO gauge. What is the thought process for skipping the NO-GO gauge and what FIELD gauge was used, .223 FIELD or 5.56NATOMAX?

Well thanks, I was considering buying one of these, but after this review I'm a bit skeptical so I'll hold on to my money until I can get my hands on another brand. Question: have you done a physical on a Wilson Combat specifically the Bolt Carrier Assembly, Wilson Combat®, M16, 5.56 NATO, Mil-Spec, Polished Nickel Boron?? If not, maybe other Wilson's and would you share your thoughts? Thanks a lot for this work, I've watched many videos and learn a pile of stuff each time I watch.

I have bought a few of these BCG's recently, which have performed fine. They are still in business, and I get email promotion flyiers frequently.

Sometimes there will be some semi rough machining marks in spots. I'd have to be looking at it in person because the video of a computer screen can be like looking at a CRT tv even if the video is high quality on both. Some machining marks will allow oil to hold between the parts. But you want then to be in the range of ten thousandths and nothing more. I like to test them with a cotton swab for burs then using a softened pick to feel for any deep tooling marks. Most scratches can be visible if you have the lighting and the eyes for it. A magnifier and a good light will tend to help you see a decent portion inside a carrier.

I have one with a few thousand rounds thru it zero problems with it so far.

@badbattleaxe5832

3 жыл бұрын

@Jason Pickard that's probably true. Just stating my experience with this BCG.

Can easily de-magnetize with the drill and magnet method as well if you do not have a fancy device like School of the American Rifle has. I have successfully used this method with knife making and with some small gun parts.

@5jjt

2 жыл бұрын

What is the drill and magnet method? Rather, how do you do it?

@tylerlondon5052

2 жыл бұрын

Drill method?

Love your videos. I'm still debating which bcg to get after I watch your vids. Do you prefer NiB or DLC? Also, if price wasn't an issue, which BCG would you go with? Thanks!

Like these Sharps XPB's, The Reliabolt is nice. Have a few bcg's and I wish I could afford all these nice tools to check for good, Solid performance. I buy high quality barrels and bcg's above all else! The heart and soul of the rifle, In my opinion, Are the barrel/bcg. The 2 things you wanna spend the most on if ya ask me. Receivers are less important as long as you buy from a decent reputable source.

December 5, 2023 - they are still in business. Got one of their SAGRS Adjustable BCGs in DLC. Hoping to get a couple of their .308 BCGs when they start making them again.

@dfiantii64

4 ай бұрын

Saw your comment i am in the process of buying either the one you have or the Bootleg option. Can you tell me why you chose this one over Bootleg and which finish did you end up going with? I’m finding a hard time deciding which to go with for my build. Thank you

@raheemhussein4525

2 ай бұрын

I have bought the bottom one in the beginning of May 2024 and they are still in business.

@gandalfgreyhame3425

2 ай бұрын

@@dfiantii64 the SAGRS Adjustable BCG in DLC comes only with that black DLC finish. It was highly recommended for its tough finish by this other KZread channel. Dunno what the Bootleg BCG is - didn't see that term on their website

@dfiantii64

2 ай бұрын

@@gandalfgreyhame3425I ended up going with the BCG option especially after the price increase but I may still get one in the future . It was a hard choice..

I'm not going to say what my job was in the past. But a few of us used the Sharps NIB bcg's. They held up and worked well in crappy conditions. We were not really supposed to be using these but after multiple issues with issued parts. We did what we had to and never had any more issues.

@bobbyc2768

2 жыл бұрын

Either military or contractor, who else gets issued rifles to work with. Saying "I won't say what my job was" doesn't make it cooler, you were probably a grunt like everyone else.

@toynazi

2 жыл бұрын

@@bobbyc2768 I don't really care about "sounding cool" But when parts fail you have to do what you gotta do. After the Army I did PSD work mostly in Africa and that is where the issue happened.

I got one just this month, I'll have to look it over to see if it has any of these issues

i have two of these bcg, they are great!

Go to 16:10 to capture a view of inspector Chad. He inadvertently showed us a picture of himself. Thanks for the content.

@deltabravolima1514

4 жыл бұрын

Lol stalker!! Joke

I have a DLC coated 4000 350 Legend been doing great

What in particular do you not like about the lugs on the SRC Bolt? Why does the slanted shape put you off?

When i worked for the Army as a it tech in the pentagon, we used to have to get SIPR or secret classified and unclassified too i believe and use that demagnitizer on the hard drives.. they called it a degausser and we probably did it wrong by placing the drive directly on the metal tray causing loud buzzing/vibrating. We have to spin the drive 10x minimum i believe and that was after running a program on boot to do a 5x pass on all the hard drive sectors to rewrite them 5x. This took hours to run.

is there a complete bcg physical kit that has all of the gauges and tools you used?

most excellent video

The machinist who makes these knows whether or not they are good. As a machinist myself you will know from the sound of the machine and a few other ways but if your have been doing I long enough you just know.

@tomboysupremacist

3 жыл бұрын

As another machinist, I'd have to agree. The machine will tell you if something is wrong. That said, these are probably done on a modern CNC that just needs someone to babysit it

Can you shared the dimensions for the pins you put in the carrier key and firing pin gauges for Go and No Go… that seems like a good investment to make through Vermont Guage thx!

Holy shit I wish I would have found this channel. Thanks for your work and research, sir. Quality control are afraid now 😂

@AnarchAngel1

2 жыл бұрын

That's what I think to myself when I watch his videos. I think it's good, channels like this are gonna keep these manufacturers honest and on their toes

@bidenisatraitor7633

2 жыл бұрын

Look up the vid he does on the fail zero bcg ...talk about quality control

Wondering if the "cuts" on the sides of the BCG, besides reducing friction, also offer a degree of looser tolerance? Looser tolerance that could aid in reliability when mud or ice get in the action? Just curious.

Could the rough tooling marks inside of the BCG you saw with your Bore scope be from using an Otis Bone Tool for cleaning?

I have 2 Sharps BCG. One is NIB coated for 300BLKOUT and 0.750" gas block @ 14.5" barrel length, purchased 6 years ago. zero complaints. New DLC BCG for 223 Wylde and 0.625" gas block @ 14.5" length; standard buffer spring...brand new build. 5.56 ammo. Has a cycling issue...less than 10 rounds fired. First shot, no issue. 2nd shot, seems BCG doesn't fully blow back as it catches the casing on the side and fails to feed. looking at the starting point of BCG witness marks on casing, the distance (witness mark start to end of case) is decreasing. The last round's witness mark starts at somewhere distal to the primer rim (probably the wrong term) but proximal to where the case is its full diameter...so >1mm &

Is there a go/no go gauge to check the cam pin hole? Seems one of the flat sided gauge pins like you use on the firing pin hole would be a good idea to check for any egging out of the cam pin hole.

@SchooloftheAmericanRifle

4 жыл бұрын

Yes. I am still doing testing on it. It's a long process.

Have a chance to look into a Lead & Steel ARC bolt? Like to get your opinion on one or what you would recommend as a good duty grade BCG

I dont see the big deal with the lugs, The rear portion of the lugs are the part that take the impact against the barrel extension when firing. The angled front area is just to help with the bolt entering the barrel lugs. That side of the lug has little stress. I was really set on this carrier but the gas ring path machining marks are pretty bad. Especially after seeing your Lantac bore scoping and how smooth that looked. Im bouncing between going Lantac or a JP low mass. Lantac are a bit more $ then the SRC though.

What did you say the carrier length range is/ where should it be at to be spot on?

Where should you get the gauges and supplies for checking this kind of stuff

Surprised to see Sharps Rifle Company and AR parts. Interesting, now need an AR for the Quigly Down Under round.

Does Sharp's make carrier and bolt for CMMG Banchee 9MM? Also with delayed blowback?

What are your thoughts and experiences with enhanced gas rings? Specifically the JP enhanced one piece gas ring?

I got two for two of my .308 rifles... Product looks great BUT..... when using it is almost impossible to push the bolt release to close the bolt.... You have to use a plastic hammer to hit the bolt release button...... Not that way on the stock LR308 bolts as they function/release just fine......Cant find the problem... In looking for why the problem I noticed the stock firing pin and hole hole is right at .060" undersized.... Standard firing pin hole is .075" to .076" with a .074"firing pin... which seems to be standard on 6 LR308/A10's I have checked.... Why???? is this correct?? It works but you cant replace a firing pin with a standard pin... So I am still using my stock from Brownells bolt carrier groups until I get an answer... Tech support has not replied to me...

Why would you not want the parts in the bcg to be magnetic what problems would that cause ? What brand bcg would you recommend ?

Given your thoughts on the lug design on this, I'm curious how you feel about the rounded lugs on the Knights Armament bolt. Also. Are you not a fan because it's removing material that could make for a stronger part or is it more a matter of "clean your gun and you won't have the stoppages this claims to prevent?" Or something else?

@5jjt

2 жыл бұрын

I think they might use tool steel, which is harder than carpenter. Since harder equals more brittle here, maybe those cuts are to eliminate where most lugs chip, crack, or break?

@DM-sq3jm

2 жыл бұрын

S7 is a shock resistant steel designed for impact. Carpenter 158 is brittle by comparison. However, any steel can only be as good as its heat treatment.

@jackbauer4186

26 күн бұрын

​@@DM-sq3jmSupposedly Chad said the s7 bolts are so hard, they can sometimes form impact marks inside the chamber from bolt release.

@DM-sq3jm

26 күн бұрын

@jackbauer4186 Interesting, thank you for sharing. I go back to my last statement: any steel can only be as good as its heat treatment. If the heat treat/hardness is wrong for the application, you can have a suboptimal result with a superior steel. I have to admit, it's been a while since I saw the video and can't recall the details at this time. Keeping my comments general as a result. How you have a great day.

Are the gas keys and bolt carriers chrome lined? I've been told they are not but seems weird given their 300 dollars?

Chad would you video how you change/replace gas rings. Thanks!

Was there any notable change in accuracy when you swapped over to this BCG?

I'm glad I had a chance to see this video because I was thinking about buying one of the Sharp's BCG. But not now, I have any confidence in them after seeing this video.

@gretchindg

4 жыл бұрын

Paul Hughes so you will or will not buy? FWIW, though I don’t have the complete BCG, I do have 2 bolts (one original batch which I use on a 10.5” 5.56 from Sharps and one newer using on 8.5” 300BK). Each has seen about 2500 rounds with ~1000 rounds each suppressed. I have had no issues with either. That said, for the price, I would get a Colt, Sionics, BCM, or DD.

Wish I could get the diameters of all your gauges an just make my own, there's so much $$ in all those gauges!

Where do you get your various go / no go gauges?

my brother got one of these a while back, the bolt face was out of dimension and wouldn't go into battery with a cartridge. wish they would measure it out before send out. it was the coated type

@AnarchAngel1

2 жыл бұрын

The barrel extension could have been out of spec...or it could be the bolt. I think this channel has proved you really need an accurate way of measuring both parts to know what the true issue is

How's does the firing pin get magnetized

What’s your opinion on ejector spring setup? Seeing with insert or spring with insert?

Why aren’t you a fan of the tapered bolt design? It reminds me of the KAC bolt in some regards.

I would like to know if there is a company that is actually putting out flawless/perfect BCG? I have a feeling no company puts out a perfect BCG???

Hi there I'm new to the channel but have heard you reference yes fasteners and magnetism several times can you please elaborate? Sorry if you've explained this before but I didn't see a video breakdown of what you are looking at. Thanks!

@tylerlondon5052

2 жыл бұрын

YFS fasteners are good fasteners, but not in a BCG. They aren't made for that and snap much easier than others.

What was the magnetic bit about? Do parts become magnetic or something??

Wow, I had no idea how many ways there are to measure/diagnose BCGs. What would you recommend for a high-quality BCG? I'd like to hear a recommendation from a professional who checks these for a living. Great video. I have been building my own ARs for a couple years now and I love the gunsmithing aspect very much. This was a great video and I learned so much. Also, is it bad to put a donut AND insert in the extractor? I just bought a 4 coil Sprinco kit and put both the donut and insert in a PSA NIB BCG. Is that okay? I haven't shot it yet. And what could potentially go wrong if the firing pin is magnetized? Sorry for so many questions. Awesome job brother.

@welderdude1

Жыл бұрын

Avoid PSA. Bad QC. Young Machine and KAC are very good.

I bought one of these in 2018. When I had approximately 700 rounds through mine, the gas key came completely loose one day on the range, turning my AR into a bolt action. I contacted Sharps and their customer service was excellent, they had my BCG back to me in a little bit more than a week. The repaired BCG had noticeably deeper staking on the carrier key screws. I fired approximately 100 rounds with it and had no issues but I had lost a lot of confidence in the product and ended up replacing my BCG.

What bolt carrier would you buy for an AR-15 for shtf ? Thank you !!

Why is magnetism a problem? Debris pickup?

I replaced my bolt with one of the sharps bolt and it runs great with my xm177 top end on full auto.

They had heat treating issues at the beginning. They fixed all the bugs. I have a DLC one.

Any chance the nickel boron coated bcg is NP3? Or were you pretty confident it wasn't NP3? Thanks!

@tomboysupremacist

3 жыл бұрын

SRC sells the XPB in NIB-X (nickel boron) and that comes with a relia-bolt also in NIB-X. They also sell just the relia-bolt in NP3 though, so it's possible it's NP3

Where did you get your go nogo Gauges

Several companies have bolt heads with machined bolt head lugs for the same purpose. What's is the reason you don't like this modification on this specific bolt ? I have ran one for the past five years with zero issues.

@MilspecPanda

2 жыл бұрын

If Knights armament or LMT came out with this bolt design it would sell for 1k and be sought after as the best bolt on the market

I’m wondering why you are not fond of the sharps bolt lug design. I can see this being a good design for when debris does find its way in to the barrel extension. I guess I’m confused as are you not a fan because of the reduced mass on the bolt lugs or due to the thought of debris getting into the extension as such a low possibility?

@tomboysupremacist

3 жыл бұрын

I'm personally a fan of the XPB but the relia-bolt is very hard/strong and coupled with the design can peen the breech face on an empty chamber supposedly

Did the silver one end up being NP3 rather than NiB?

Why is it bad that the firing pin was magnetic?

Where do these guys live. I had a guy do some work on my pistol. He gave it back, and broke the latch release for clip. And didn't fix my cycling issues. I was boiling... Boiling angry 🤬

I have a question regarding the magnetized firing pin. I own a SRC BCG & I notice that if I chamber a round, it leaves the slightest indentation on the back of the primer, is that because my firing pin isn’t demagnetized? I’m hoping my local gun smith has one of those machines to demagnetize it so it doesn’t leave that marking on the primer, if that’s the reason it’s happening...

@ragedashboard6374

3 жыл бұрын

Your rifle is fine. Every AR15 in existence does that. It is because the firing pin is designed to be free floating (Google it). The demagnetizing is a very minor thing which can cause metal shavings to accumulate.

@TMega5612

3 жыл бұрын

@@ragedashboard6374 Magnetization on the extractor or boltface would suck. Magnetized firing pin would hardly accumulate anything ever.

They look brand new...

Sharp’s is still in business. Bought XPB in flat dark earth April 2024

I've watched a ton of your videos and I'm wondering why do you test for magnetism.

@bidenisatraitor7633

2 жыл бұрын

Because steel cased rounds could shead particles.. and if its magnetic you have shavings clinging to it.

I have 3 XPBs with between 4 and 6 thousand rounds between them. I haven't had any issues, good to know though just in case.

@DJ-jq8if

4 жыл бұрын

Hows the finish holding up? Debating on getting on or an lmt.

@wbsbraden4

4 жыл бұрын

Have you noticed any more wear than normal in your upper from your BCG?

RIP SRC, you made some good stuff and Customer Service was excellent. You will be missed.

@JohnBrowningsGhost

4 жыл бұрын

What happened to SRC?

@archerdog1

4 жыл бұрын

@@JohnBrowningsGhost They are going bankrupt.

@ronin8490

3 жыл бұрын

@@archerdog1 still selling products as of a week ago...

@kylerobison1425

3 жыл бұрын

How is it possible to go bankrupt when business is at its peak they are ran very poorly if this is true

@tomboysupremacist

3 жыл бұрын

@@kylerobison1425 They were probably saved by the bell with corona etc. Everybody's buying guns

So is this brand BCG worth the money?

just wondering why is the magnetizing bad? just wondering.

@ICECOLDOUTDOORS

4 жыл бұрын

Steel cased ammo and bimetal bullets can leave metal shavings that get stuck to the magnetized parts and possibly cause more wear and or problems

I just bought one of these but I haven't recieved it yet. Don't b givin' me no buyers remorse now! 🤔

You sure have many different types of gauges for the the AR-15. All I seem to see is you performing gauging of the parts. I have yet to see you perform any type of work on a rifle. I could do what your currently doing if I had the gauges. Let's see you do some work on the Rifles.