At last, simple clear and visible and understandable. Well done ;)

@Pclairtechnologyltd

Жыл бұрын

Many thanks!

thanks for KZread people like you who makes things look quick and easy 😀

Clear, quick, and educational. I like it. That might help my issue with the core being in as far as it'll go but leaking. There might be some issues with the threads or debris.

@Pclairtechnologyltd

Жыл бұрын

Thanks, glad you found it helpful 😃

Excellent explanation and demonstration, thanks!

@Pclairtechnologyltd

2 жыл бұрын

Glad it was helpful!

Well explained. Like it. Thanks man.

What a fantastic video!

@Pclairtechnologyltd

Жыл бұрын

Thanks Owen 😀

Thanks for this

Awesome, proper video

@Pclairtechnologyltd

Жыл бұрын

Thanks Dennis 😀

Excellent Mate

@Pclairtechnologyltd

2 жыл бұрын

Many thanks!

Superb video - thank you for doing this. I wondered what the other ends of the tool were for; this video has really helped.. Thanks again - subscribed, liked and notified. Dave

@Pclairtechnologyltd

2 жыл бұрын

Glad it was helpful!

Ty ty

@Pclairtechnologyltd

2 жыл бұрын

You're welcome

I think the pointy part is actually a tool to remove broken cores, pull the pin and screw it in counter clockwise, though I ended up stripping it that way and using the scissor trick kzread.info/dash/bejne/a4uKudCjaaq6dZc.html

Don’t over tighten the valve core! I did this and it popped in past threads and I had to replace the whole valve stem

0:46 0:47 0:47 0:47 0:47 😊

Are all tire valve for cars and liter bikes the same?

@RogerPack

6 ай бұрын

Shrader valves were invented in 1844 I think FWIW... :)

Do you lose air when you remove the core

@hyankov

2 жыл бұрын

Exactly what I wanted to ask. I've seen conflicting videos. This one says the pressure will make the core fly out, on another I've seen a semi-deflated tire not lose any pressure when the core was removed.

@Phuk_Yew

2 жыл бұрын

Unless the tire is really flat, you will lose air. The more it is inflated, the more pressure inside and therefore it will blow more air out with more force.

@migzy4704

Жыл бұрын

The valve core is the only thing that holds the air in so yeah it will lose air. I know because I'm currently replacing the core on one of my wheels.

@pingpong9656

Жыл бұрын

Removing the core helps the air move out super fast on a tire.

Valve core tool. The valve itself stayed in place.

So this tool removes valve cores? So it will flatten the tyres of a car that say, has parked in my assigned spot. Repeatedly. After several warnings and complaints. When I told them I'd do exactly this?

@nickrct

2 жыл бұрын

You don't actually remove the cores, that would be vandalism. What you want to do is loosen them so every time they inflate it, it slowly but surely loses air in each tire until it drives them mad. 🙂

Ok…half of the threads have broken off…good video though 😉