TVM802 A / B , full production run
Ғылым және технология
Pasting, Pick&Place with the TVM802B and soldering a board. It runs at 50% speed. In the meantime I have adjusted the machine for 100% speed. To get reliable results at 100% you need totally clean nozzles and an external strong vacuum pump and use the camera for ALL components.
Sorry for the low audio volume. This was one of my first videos and I was still learning how to prepare things for youtube.
Пікірлер: 42
Update after 3,5 years and about 3000 boards: the TVM802B is still working very well. I had to replace a broken cable and I have repaced the VAC pump by an external stronger pump. Everything else is working fine. The machine is not perfect, but its relatively cheap and does a wonderful job for me.
@zainulsiddiqui9037
4 жыл бұрын
What is cost and cph?
I like this video, it's much more easiler for English users. Much more simple than seeing our manual:) Thanks for sharing. From Ashley Liu,ROBOTDIGG, agent of TVM.
@harry4516
8 жыл бұрын
Thank you, Liu. I would like to see a video like that for the TVM920. I want to buy a TVM920 but its hard without any information and user references. Harry
Hi, awesome video thx! question about bottom right ssot6 or similar. It looked very skewed.was it missplaced? I get my own machine today, exactly same but with a tube feeder as well. interested in any advice you might have
@Chingonazo1
3 жыл бұрын
Hello Aiken, did you buy the machine? If so, how do you like it?
@aikendrum1518
3 жыл бұрын
@@Chingonazo1 The only things I don't like are the ganged tape pull stripping the tape cover and the spring dispenser for each reel where the component feed occurs seem to interact, and be difficult to set up, and temperature change definitely effects calibration of the pick. Note the back reels have no where for the tape to go except under PCB and out front. A problem if you have trays for ICs there. The tube feeder seems a waste of time to us, more problems than worth. vision is ok, for what it is. With those things said, its still useful for prototyping.
How do you calibrate the bottom camera position?
ATMEL FTW!!!
What is the recommended table size to place TVM802B? Is it ok to let the reel bar hang like that instead rested on the table?
The custom made tray, did you purchased it of the shelf or you made it. Wondering if anywhere can get the cad file as an open source.
This video is great. TVM802 model is good for me too ,it's working for 4 years already cheap and durable . I considering about QIHE new model QM61 with six head automatic model . Do you know more information about it?
Здравствуйте, этот станок отлично работает на скорости в 70%, даже на шатком столе, если стол будет очень устойчивый то скорость можно увеличить.
Cool :)
Where did you get your IC tray from? I have this same machine and would love to get a bigger tray.
@harry4516
7 жыл бұрын
I made it by myself on a mill, it is aluminium.
@AlexTsamakos
7 жыл бұрын
Would you perhaps consider publishing the design? I think it would be very useful to a lot of people, myself included :)
@rickburnett4836
7 жыл бұрын
Looks great! Any plans on selling them? I'd certainly like to give you some of my money! :) I have a CNC machine, but I do not have it setup to do aluminum.
@slavric
6 жыл бұрын
I would buy it too :)
@elainefang7090
6 жыл бұрын
we have higher placement speed pick and place machine, email: smttechpnp@gmail.com
Hello Sir, 6:36 did you bake it afterwards and how?
Why does it go to the light source with some components? To check orientation?
@harry4516
5 жыл бұрын
yes, there is a camera to check the position of the component on the nozzle. Today I use this camera for all components which takes a little more time but makes placing much more precise.
where did you get that stencil printer?
@harry4516
7 жыл бұрын
it is the TECPRINT from C.I.F, i bought it from rs-components.com
Do you find you can not run it over a certain speed? Just got mine and I have been testing at higher speeds and it seems OK, but your video is running at maybe 30? Please comment on speeds you can run at max with no issues.
@harry4516
7 жыл бұрын
except 2 components everything is placed with 100% speed. I know it looks slower compared with other videos, but I promise it is 100%. Maybe a firmware issue, I don't know.
@FerHiManu
7 жыл бұрын
Hi Harry, apart from the individual speed, there is a general speed bar that is hidden in the maximized screen, you must increase this bar.
@elainefang7090
6 жыл бұрын
we have higher placement speed pick and place machine, email: smttechpnp@gmail.com
What is the pricing for this in 2021?
Hi Harry, Did you get a user manual with your machine ?
@harry4516
7 жыл бұрын
I got some "papers", but I would not call it User Manual, so the correct answer is: no.
@eddyfontaineyoutu100
7 жыл бұрын
Did you achieve to adjust the machine to pick the component exactly in its center ?
@dv1112223331
5 жыл бұрын
Hi. Is it possible for you to make a guide for calibrating the machine? The "papers" are not exactly explaining the process in detail. Would very much appreciate it. Thanks
Where can I download the program and drivers for video cameras? Где найти программу и драйвера для камер?
Hi, gibt es von der IC Platte eine Download Datei? Würde die gerne nachbauen.
6:17 bottom right. Totally missed
@Sh4dowHunter42
4 жыл бұрын
I was noticing that also, it was corrected before being put into the IR Oven.
@harry4516
4 жыл бұрын
that happens. After placing the parts I always look over the board and make corrections if required. The reason is, that the integrated VAC pump is a bit weak. I replaced it with an external very strong VAC pump and the results get much better,