Turning Engine Valves into To Stand Offs. In this video engine valves are turned into part stand offs to allow for inspection.
Жүктеу.....
Пікірлер: 33
@craigtate59302 жыл бұрын
very cool reporposing project
@jameswilliams24152 жыл бұрын
Hi! I'm one of the winners of the BarZBash this year. I received one of the sets of precision stones, just wanted to thank you for them as well as thank you for contributing! I've been a surgical instrument journeyman for the past forty, haven't had a pair of these till now!
@AlmostMachining
2 жыл бұрын
Thank you very much. If something goes wrong with them reach out to me.
@frankward7092 жыл бұрын
Very cool gonna coming an awful handy Thanks for the video
@AlmostMachining
2 жыл бұрын
Thank you!
@jameswilliams2415 Жыл бұрын
Great idea! I'd like some!
@AlmostMachining
Жыл бұрын
My email is in my contact information. Thank you for watching.
@OldIronShops2 жыл бұрын
Quite a clever tool for holding up that part to measure underneath God job.
@rodneykiemele47212 жыл бұрын
That’s a pretty good idea, should work great. Thanks
@AlmostMachining
2 жыл бұрын
Thank you!
@RRINTHESHOP2 жыл бұрын
Came out really. Nice and they worked.
@AlmostMachining
2 жыл бұрын
Thank you!
@TheKnacklersWorkshop2 жыл бұрын
Hello Phil, A really interesting video and nicely done, the stand offs should work very well. Take care. Paul,,
@AlmostMachining
2 жыл бұрын
Thank you Paul!
@bearsrodshop7067 Жыл бұрын
What a great idea passed on from Randy to you. after yours and Stans visit on March 1st 2023, I am going back to watch as many passed videos, and wished our visit could have been a little longer, but I have a Themac tool post grinder that you have given me a great idea. Will share one day that build, when may work load slows dw, thx Phill, great video, Bear
@AlmostMachining
Жыл бұрын
Thank you Bear for your tour and amazing hospitality! I look forward to catching up on your videos!
@TheAyrCaveShop2 жыл бұрын
Good reason to never through anything away..Lol Love that cool grinding pattern
@AlmostMachining
2 жыл бұрын
Thank you!
@MrEndoftheRoadRC2 жыл бұрын
Slick Bro.
@swanvalleymachineshop2 жыл бұрын
Great idea . I have a heap of valves around , i wonder how the stems would go for small brazed carbide boring bars . 👍
@AlmostMachining
2 жыл бұрын
That is a great idea Max. Thank you!
@nilzlima3027
Жыл бұрын
time to fuck around and find out!
@AlmostMachining
Жыл бұрын
Yeah. I need to try one as a bar.
@MrFactotum Жыл бұрын
Hi Phil Came across you from Paul at The Knacklers Workshop, i have sub'd and bell'd you and will take a look at what you get up to. take care Kev
@Man-in-da-shed
Жыл бұрын
Couldn’t have said it better myself,
@AlmostMachining
Жыл бұрын
Thank you Kev, im working really long night shift hours. Thank you for coming along. Lots of stuff on the bench now. I hope to get more videos out in the fall.
@AlmostMachining
Жыл бұрын
Thank you Ian! Lots to come.
@dizzolve2 жыл бұрын
18:25 sounds like a laser death ray
@OldIronShops2 жыл бұрын
Hi Phil Chris from the bash. I didn't realize you had a channel untell stan mentioned it in his thank you video. I'll have to poke around you archive and see what I can absorb. Btw I'm going to try to go there the bearing horse and work up a list.
@AlmostMachining
2 жыл бұрын
Hey there Chris! Was great interacting with you at the Bash. Let me know what you may want to see or if you have questions. Thank you!
@OldIronShops
2 жыл бұрын
@@AlmostMachining scraping and machine alignment are always good content. I see your rebuilding a mill. Keep up the good work
@AlmostMachining
2 жыл бұрын
Thank you. Ill be at it hard this weekend?
@joshhennen Жыл бұрын
some exhaust valves are filed with sodium to aid in valve cooling. Cutting into one of these might give a nasty surprise!
Пікірлер: 33
very cool reporposing project
Hi! I'm one of the winners of the BarZBash this year. I received one of the sets of precision stones, just wanted to thank you for them as well as thank you for contributing! I've been a surgical instrument journeyman for the past forty, haven't had a pair of these till now!
@AlmostMachining
2 жыл бұрын
Thank you very much. If something goes wrong with them reach out to me.
Very cool gonna coming an awful handy Thanks for the video
@AlmostMachining
2 жыл бұрын
Thank you!
Great idea! I'd like some!
@AlmostMachining
Жыл бұрын
My email is in my contact information. Thank you for watching.
Quite a clever tool for holding up that part to measure underneath God job.
That’s a pretty good idea, should work great. Thanks
@AlmostMachining
2 жыл бұрын
Thank you!
Came out really. Nice and they worked.
@AlmostMachining
2 жыл бұрын
Thank you!
Hello Phil, A really interesting video and nicely done, the stand offs should work very well. Take care. Paul,,
@AlmostMachining
2 жыл бұрын
Thank you Paul!
What a great idea passed on from Randy to you. after yours and Stans visit on March 1st 2023, I am going back to watch as many passed videos, and wished our visit could have been a little longer, but I have a Themac tool post grinder that you have given me a great idea. Will share one day that build, when may work load slows dw, thx Phill, great video, Bear
@AlmostMachining
Жыл бұрын
Thank you Bear for your tour and amazing hospitality! I look forward to catching up on your videos!
Good reason to never through anything away..Lol Love that cool grinding pattern
@AlmostMachining
2 жыл бұрын
Thank you!
Slick Bro.
Great idea . I have a heap of valves around , i wonder how the stems would go for small brazed carbide boring bars . 👍
@AlmostMachining
2 жыл бұрын
That is a great idea Max. Thank you!
@nilzlima3027
Жыл бұрын
time to fuck around and find out!
@AlmostMachining
Жыл бұрын
Yeah. I need to try one as a bar.
Hi Phil Came across you from Paul at The Knacklers Workshop, i have sub'd and bell'd you and will take a look at what you get up to. take care Kev
@Man-in-da-shed
Жыл бұрын
Couldn’t have said it better myself,
@AlmostMachining
Жыл бұрын
Thank you Kev, im working really long night shift hours. Thank you for coming along. Lots of stuff on the bench now. I hope to get more videos out in the fall.
@AlmostMachining
Жыл бұрын
Thank you Ian! Lots to come.
18:25 sounds like a laser death ray
Hi Phil Chris from the bash. I didn't realize you had a channel untell stan mentioned it in his thank you video. I'll have to poke around you archive and see what I can absorb. Btw I'm going to try to go there the bearing horse and work up a list.
@AlmostMachining
2 жыл бұрын
Hey there Chris! Was great interacting with you at the Bash. Let me know what you may want to see or if you have questions. Thank you!
@OldIronShops
2 жыл бұрын
@@AlmostMachining scraping and machine alignment are always good content. I see your rebuilding a mill. Keep up the good work
@AlmostMachining
2 жыл бұрын
Thank you. Ill be at it hard this weekend?
some exhaust valves are filed with sodium to aid in valve cooling. Cutting into one of these might give a nasty surprise!