Very helpful, changing to a 12" but knowing the 14" option is awesome. Thanks. The part numbers is greatly appreciated.

@KyleHallwoodworker

2 жыл бұрын

You’re welcome Dennis

Just found you tonight. You are the first to explain something I have wanted to do in detailed yet simple instructions and with the part #’s too. I never used a chainsaw until I inherited my family’s Century farm of 300 wooded acres at age 40. I still have all my fingers 😁. Never had the time to think about carving until 4 years ago. I don’t know any wood carvers personally to help this old gal that wants to try carving on some logs I’ve set aside that a Dremel is too small for. I’ve learned 2 things from this one video. Never too old to learn.

@KyleHallwoodworker

2 жыл бұрын

Awesome! I’m glad I can help . I have several carving tutorials on here that can help get you started

@KyleHallwoodworker

2 жыл бұрын

And 300 wooded acres NICE !

You need to push the bar up when adjusting and tightening.

I have 2 they are cheap and awesome for small carvings and detail. I made the mistake of running my .043 chain through oak and ripped all the teeth off 🤣

@KyleHallwoodworker

2 жыл бұрын

Oh jeez !

informant and simplified . Thanks for sharing .

@KyleHallwoodworker

2 жыл бұрын

Thanks bud

Thanks Kyle. Giving part numbers do help when doing instructional videos. Great video. I would like to know where to get a 8” bar for the stihl as stihl only makes 12”. As small as they make. Any help appreciated.

@KyleHallwoodworker

2 жыл бұрын

Baileys , or (T and D carvings .com )

Thanks 😊

Any experience with 25F full house chain? I've already switched several of my saws to 25AP and was thinking of giving 25F a go.

@KyleHallwoodworker

9 ай бұрын

I have not used it .

Thanks Kyle, just the info I was looking for actually. I need to know if this chain is suitable for harder woods as this topic needs to be tested, it hasn't been thoroughly described, plus is there a more solid chain if needed ? Grateful for any feedback please.

@KyleHallwoodworker

Жыл бұрын

Hey Ray once I finish the 4 part tutorial series I’m working on I will talk about carving different wood with this set up and maybe carve a couple different species

@raypitcher9767

Жыл бұрын

@@KyleHallwoodworker Thank you so much Kyle, that will be very helpful

Thanks for info

@KyleHallwoodworker

2 жыл бұрын

You’re welcome Ken

thanks your videos are helpful

@KyleHallwoodworker

2 жыл бұрын

You’re welcome

Hey Kyle I've been using the 12in. Stihi bar with the 1/4 pitch chain for about a year and I like it a lot . On my MS170 I get oil that comes out of the muffler I think it's because of running it at low rev's have you had that problem . I got a DeWalt battery saw for Christmas I was thinking about putting a carving bar on it I know Jordy did on his . Do you know where I could get a bar for it . Thanks Kyle .

@KyleHallwoodworker

2 жыл бұрын

I have not had one of mine do that yet . It could be from low rpm’s and getting a build up but I’m not sure

Did that thanks

You’d solve a huge answer for me if you could let me know if any stihl, corded (electric, but not battery) saws will take that sized sprocket and a dime tipped bar. I cannot seem to get answers on it anywhere, including my local stihl dealer.

@KyleHallwoodworker

Жыл бұрын

I really do not know . I’m sorry

@KyleHallwoodworker

Жыл бұрын

If the saw has a 1/4 pitch sprocket you could possibly modify the bar if it dosent fit of the lug bolts. Just an idea

😁👍👍👍👍👑

Should have greased your roller bearing while you had the sprocket off just saying hope ya have a great weekend 👍

@KyleHallwoodworker

2 жыл бұрын

Thanks you to David

Why do you have the chain so loose I make mine a lot tighter should it be loose for carving?

@KyleHallwoodworker

Жыл бұрын

I keep my chainsaw a little loose on a roll nose and a lot loose on a dime tip bar it’s less friction less wear on the bar

Thanks Kyle, fro PARAFLIGHTJOE on KZread......