By clicking the link, you will get a 20% discount on the CarVertical report. - You can also use the code TDB for a 20% discount. www.carvertical.com/fi/landing/v3?a=TurboDieselBuilds&b=2f98e8ca&voucher=tdb

These videos are absolutely awesome! The guys work under the open sky, and the videos are of a suitable length and full of content. Lasse's diesel English is absolutely brilliant !!!😎

@kaiserdave666

6 ай бұрын

ye but this HP have my 1.9TDI .....

Not that much interested about diesel tuning, atleast Mercedes, but gotta watch these guys anyway. Results show how much potential there is in these everyday engines. The mods so far are pretty easy, plus the sw.

Randomly came across this video and said to myself that accent sounds familiar. Grew up in northern minnesota and there is a large Finnish community up here. I can not speak Finnish but it was common 30 years ago that in many small towns people still spoke it. Cool video on what you can do with these getting older diesel Mercedes.

fun to see how its done on mercedes that has run around the world more than 10 times😎👍✌

Great work guys. It's been very interesting watching the daily driver videos. So far it looks like stage 2 is what I will be doing on my car for now, but I'm looking forward to seeing the rest of the videos. Hopefully one day I will do all of the mods from this build series. Keep up the great work and God bless.

Yeah quite fast car with 340hp and 790nm! :D. You will win pretty much all traffic light duels with that :D

@Rrrowl

7 ай бұрын

That sluggish 5g wont win many times tho. M57 at same power level always faster...

@DeutschlandLife

7 ай бұрын

@@Rrrowl 5g with custom tcu can shift like a hell, but with standard tcu boring.

Excellent stuff, keep it going!

Tästä videosta oli itelle tosi paljo apua talven projektia ajatellen🤗

Smashing! Thanks for the video

Your doing great in your talking your videoing and your skills guys ❤

Patrick, good man i like way you are asking lasse about every single thing that we dont miss when we do it by ourselfs, good man 👍🏻

What has been Done to the gearbox? Awsome video 😊👍🏻 We love Lasse ❤️

Awesome videos though. 🙌🙌🤝

Lasse make a great job 💪

Greetings from denmark ❤

Tämmösen dailydriverin vois tehdä myös om642 versiosta 😊

136hp gain so far aint bad at all :)

Hola ,un placer poder ver tu trabajo en estos coches , tengo un w 210 motor 320 cdi , y quisera preguntarte si hay modificaciones ,sobre este tipo que has plasmado en el video . Gracias por enseñarnos tu manera de hacer agiles estos motores , gracias por el Canal

хорошие показатели👍

Neat videos and neat rally "englanti".

for next car project maybe do A BMW e60 530d =) BIG turbo =)

Hybrid turbo seem to be good for stock pump.

I have a CR 2.0 tdi from 2011, whats the bet pump upgrade ?

Best daily car Om648 power

Smaller pulley from VW?

We need more power guys😂❤

@turbodieselbuilds

7 ай бұрын

I am sure more is coming😁

Saako nuita mustia lippiksiä ennään?

Hello Teemu :))

@turbodieselbuilds

7 ай бұрын

Hello 👋

What boost ?

when you change the cams, do you want to show how to set the motor in the right position?

@TonytheCarEnthusiast

7 ай бұрын

I will make video how to set on time very easy engine to time

Why upgrade the fuel pump? Cp3R90 when used in BMW is good for over 400+ hp?

@turbodieselbuilds

7 ай бұрын

Is different crank/pump speed ratio. Make quite big difference

How much Nm can hold the transmission?

👍😎💯

Do you plan to do anything to the gearbox? Most companies will only tune these to 600-650nm as the gearbox is supposed to be fragile after this. Or are you just going to run it till the gearbox dies and throw another one in? Mine supposedly has 250-260hp, but i would prefer more like 280-290 if the gearbox will take it.

@sakariputtonen2683

7 ай бұрын

hp is not the problem. Torque and how it comes on, is.

@13harward

7 ай бұрын

@sakariputtonen2683 that's why I asked the question regarding the torque figure first...

@jeejeeoujee

7 ай бұрын

That gearbox can handle over 900Nm easily with good tune

@13harward

7 ай бұрын

@jeejeeoujee I thought the 722.6 5 speed in the W211 E320 cdi was only rated to about 580nm? I'm aware the torque limit is higher in the AMG models. I'm hoping your right though, then I can hopefully get more power, although not to the same level as these guys.

@jeejeeoujee

7 ай бұрын

@@13harward Yeah my friend had an om648 with bsr street injectors, 400cdi pump, borgwarner s360v, ported head and machined pistons. Made 456whp and 910Nm on dyno😁 It was pretty neat machine.

Hi, what can be achieved relativly reliably with the 5 cylinder 270 cdi engines om612 and om647 ?

@turbodieselbuilds

7 ай бұрын

Hi, 210hp/530mm

@TheSemo66

7 ай бұрын

@@turbodieselbuilds what can be done with bolt ons? I read somewhere that these are not so strong or prone to spin bearings etc. You can confirm that?

👍🏼👍🏼👍🏼

Mikä vanha bussi se siellä taustalla vilahti?

i have close result with almost same setup but bmw 231hp turbo with 54mm turbine wheel and 72mm compressor wheel , on 100mg and 2 bar boost i have 370hp with c30 nozzles 400 cdi pump 100mm intake and 76mm downpipe, 35 degree celsium intake air and we got 800nm also , running to 4700 rpm without boost or horse power drop, so im planing to use a 210 head with your springs and im interested what would be the gain after :)))

@tunedom6488

7 ай бұрын

72 mm comp wheen? on 54 mm turbine wheel? is engine breathing?

@Chostera

7 ай бұрын

@@tunedom6488 yes, it breaths

@tunedom6488

7 ай бұрын

can i use that combo on gt 23v?@@Chostera

@Chostera

7 ай бұрын

@@tunedom6488 nope . cant put this big shaft to the oem turbo

@tunedom6488

7 ай бұрын

what is the best comp wheel to fit to fit on 49/51 shaft ?@@Chostera

Black smoke, check your cylinder compression

Hello, I have a w210 with a 400cdi pump. But how can i control the volume regulator. The stock cp 1 doesent have one ?

@deepmotopenetration

Ай бұрын

U have to install edc16 ECU

in the next video I look forward to removing the exhaust catalyst)))

With stock turbo stock injector stock pump but aluminium intercooler, what power do you think i could get out of om613?

@turbodieselbuilds

5 ай бұрын

You can get 270-290 with stock setup

@scottsheffield64

5 ай бұрын

@@turbodieselbuilds awesome sweet. Will probably order a remap soon

link to the billet part for the pump?

@turbodieselbuilds

5 ай бұрын

www.blacksmokeracing.com/product/billet-rail-pump-coupling/

Can anyone recommend a aftermarket turbine for om642?

Сколько будет стоить комплект. Om648

What injectors did you change into it??

@turbodieselbuilds

2 ай бұрын

Our ”street” -injectors, available on the webshop blacksmokeracing.com

Is this stock injectors ?

@turbodieselbuilds

7 ай бұрын

No, this has our street injectors, check out previous episodes of the project on our channel 😁😎

5g tronic or 7g tronic and have you made any changes to the box?

@Mevax

7 ай бұрын

5g dtm software

@rukiyehasan1855

7 ай бұрын

@@Mevax I also have a w211 om648, hybrid turbo 2568)600×300×76mm and 278hp 630nm power output. My master told me that my gearbox could not last, so he left my gearbox stock. Do I need to find another mechanic? How much power can this 5g tronic withstand?

@dariodjakovic1600

6 ай бұрын

@@rukiyehasan1855they use 5G in V12 Mercedes and E55 amg. You need more power then that? The reason they used 5g until 2013 in V12’s is because 7G could not handle that torque without blowing up.

@S1cari0

4 ай бұрын

@@dariodjakovic1600 omg...really?😮

@kristoffer3000

Ай бұрын

@@dariodjakovic1600 internals are not the same though

Oliko hallissa täyttä, kun joutu ruuvaamaan suuressa sinisessä hallissa?

@turbodieselbuilds

7 ай бұрын

Juu🙊😂

w211 for 2.2 150 hp ?🚴 any modification to make 200 hp ? 😁

@turbodieselbuilds

7 ай бұрын

If its om646, om647 turbo, 4bar map and tune. Then is able to get 210hp 550nm

Ajaako Lasse rallia?

@turbodieselbuilds

7 ай бұрын

Vain Simulaattorissa tietääkseni 😅

Siis onks siä vakioputki?

@turbodieselbuilds

7 ай бұрын

Onjuu

@tonisyrjala7586

7 ай бұрын

Hyvin se sauhu näköjään sieltäki pihalle löytää😂

Хорошый двигатель для потенцыала,

Is it possible to fit s400cdi pump on om647?

@lassekalliokoski8775

7 ай бұрын

Yes, it fit aswell, same modifications. Om646-647-648 is same front on engine.

@amerikano9706

7 ай бұрын

@@lassekalliokoski8775 But 647 have bigger vacum pump i think, is there will be enough room?

are injectors stock?

@turbodieselbuilds

7 ай бұрын

No, our STREET injectors

Hello, we are Ravoony car film supplier, can we cooperate?😊