Definitely make a more detailed breakdown of the gauge/electrical setup with that resistor

@joseolivares9194

3 ай бұрын

Anyone figure this out

Wow that things an animal!! Yeah I have a 92 blazer stock manual that I've been working on but your's got me 🤔 bout going back to the drawing board. Hey great build!!

Definitely need a detailed build breakdown, that thing is sweet

This is super cool man, you sound like an engineer, doing things just to see if it would work. Keep it up we want more

super cool build!

Music to my ears bro. Wish I was your neighbor.

This is an awesome build

2:27 OMG Look at the chilly degree right there

Past couple years?? Damn that’s nice

wanna see more of this!!

Love it!!

LED lights in the grille...... amazing idea. ! ! !

It sounds like a 6.5 Detroit when you hit the gas

@campervanbug7658

8 ай бұрын

😁

@mikecesario8880

5 ай бұрын

6.5s😩😩😩😩

God Bless America!!!!

Sounds good

Factory 5 speed red interior an exterior 3rd owner got it with 165,469 10 years ago as of right now 192,777 no cracks in the dash ashtray hasn't been used yet seats 6 swapped the buckets for the color matching 60/40 that was put in storage for 17 years so perfect cloth still comfortable 😅 it's my favorite expensive to daily but smiles per gallon beat miles per gallon

Very interesting 👍

I dropped in a 4 bolt main 5.7 Vortec in my 1992 Chevy Z71 and it made a huge difference and a Holley sniper unit integrates perfect in those old TBI setups they are a great EFI very simple but a bitch to tune i bought a pre programmed chip for mine which helped a ton

@kylewest100

2 ай бұрын

I’m wanting to do a small turbo and do a torque oriented build. I’m pretty sure it’s possible because there’s upgrades you can do to a TBI. I’m thinking vortec heads and a decent intake and turn the fuel regulator up and swap a better fuel pump and there ya go. What gave me this idea was horsepower TV and that big block ford build. I also like the TBI’s because they just work. I personally know no one that’s had issues with them besides the lack of power.

Nice truck

I'm rebuilding a 88 short bed Scottsdale and am glad I watched this because now I know I can split the radio from the climate control lol.

This thing is sweet, you can buy tbi chips if you don't want to buy the hardware to burn them yourself, price is pretty much the same so might as well learn to tune them.

@illnO1z

Жыл бұрын

What are tbi chips

dope

Cool

Agree

Oh bud lol the timing shud be in negative numbers below 1000 rpm. Around 0 only after u give it gas. I build those quiet often. I raise the rpm to 1000 then set my. Timing at 8btdc. Without jumping any wires to lock the timing. That varies with ignition modules. Some are set closer to 0. But sbc is what I rebuild the most, and own one with tbi, by negative I meant btdc range. Positive would be after tdc

The resistor is to fool the ecu into thinking the engine is cold so it adds fuel I assume?

You can put a super 40 muffler, nice truck

You need EBL Flash II, you can run a 3 Bar MAP for boost and flash tune it. Slap Some vortec heads on there and a mild roller cam and you’ll see into the 400s

@pops3554

7 ай бұрын

Lol...I'm making 400 plus on a 355 vortec n/a😂

@iDrive4fun93

7 ай бұрын

⁠@@pops3554you must have aftermarket heads or had the machine shop work over the stock vortec heads. They flow good, but unless you get some machining done to the valve guides to clear a cam higher than .450 lift you’re not gonna make 400hp. I have a vortec 350 swapped into my truck, it makes ~320hp with stock heads, bored tbi, bigger injectors, vortec fuel pump, a high rise dual plane intake, a summit 8800 roller cam (204/214 at 050 with 450/450 lift), and 2.5” dual with an x pipe. With boost and a 3 bar MAP it can see up closer into the high 400s.

This is really rad! Awesome video this is gonna help me turbo my 4.3 in my 86 2 door jeep! Where do you hook up your resistor?? I'd love to run a simular set up without tuning my ecu. Would love to talk back and forth with ya!

@1985hond125

2 жыл бұрын

MonsterEatsMeCookies- The resistor is in line with the coolant temp sensor circuit (wired in series). On factory TBI's there's 2 different temp sensors, one for the gauge (driver side head) and one for the ECU (intake manifold by T-stat). Otherwise the rising rate fuel pressure regulator (rrfpr) takes care for most of the fueling (aftermarket regulator plumbed into the fuel return line). To bypass factory regulator simply remove the spring from the built in tbi regulator. It's been surprisingly reliable. Thanks for the comment.

thinking abt turbocharging my '92 K5 while we have it taken apart

Parts list? I have a never ending project 88 burb I just put 3/4 ton axles and a vortec 350 bt I put my old tbi unit on top. Actually just drove it back home today. I love doing different stuff to it and this is giving me another idea lol

@johndoe-bc3tc

2 жыл бұрын

Ur van has the same engine set up as my burb lol

My good man, mind telling me what the model number on that fuel pressure regulator is? Was going to do this on my '94 stepside with a blow-thru carb, didn't know the tbi could handle it with an fpr. I'm not in it for max power anyway, just some grunt and choo-choo noises lol. I've already got a Vortec pump so this will be perfect for it.

Can we get part list? And modifications?

300 rwhp I would guess or somewhere in that ballpark

DynamicEFI EBL Flash is the ecu/program you need to tune this set-up.

@1985hond125

Жыл бұрын

@johndelta00 I just looked that up. Looks like a really nice setup and very tunable. I did not realize anybody made such a tunable program for TBI's! Thanks for the comment! I will likely pickup that program/chip.

@iDrive4fun93

Жыл бұрын

@@1985hond125 and it’s very reasonably priced compared to other tunes as well. Hard to beat $400 for what’s basically an unlimited amount of tuning!

lol when it's in boost it sounds like a straight piped 350 except it's really far away and the wind is making it warble

friend, can you help me please, I have a Chevrolet suburban 1500 5.7 vortec 1996, I made the TBI carburetor and distributor, I had the camshaft altered a bit in stage 2 and I put an aluminum radiator with electric fans (the problem is that it It heats up after 15 or 20 minutes and the time according to the mark on the pulley is not left, I move the distributor and not Measure the time) What is the problem? can you help me

Drop a parts list video

Will this work on a auto truck I seen yours was converted to Manual did they swap the computer as well?

i want to do this how hard was to regulate the fuel

How might I go about doing this on the 7.4/454

Got a 95 c1500 with a 5.7 thinking about doing this could I get a parts list?

@therealDeal-001

2 жыл бұрын

I have that same thing and I would love one too

@krazykay5899

Жыл бұрын

Same

@jacobreynolds667

Жыл бұрын

Same I want the boost.

@donburshaw6505

Жыл бұрын

Same what headers u using? And what fuel pressure you running and what fuel pump ect

@donburshaw6505

Жыл бұрын

U answered the fuel pump and pressure sorry but headers?

What modifications to the prom chip or other calibration settings on the computer did you have to do or is it all done by the resistor nob you showed?

@1985hond125

2 жыл бұрын

@Rusty RoadTrips- No prom mods (yet). Computer is bone stock. Only mods to keep fueling safe is the rising rate fuel pressure regulator and the variable resistor to make the computer think it is cold (cold=more fuel).

@rustyroadtrips

2 жыл бұрын

@@1985hond125 Did you make any mods to the tbi to hold boost at all? Like sealing the rubber grommet for the injector wires or modifying the throttle linkage at all?

@1985hond125

2 жыл бұрын

@@rustyroadtrips The wires are actually pretty well sealed with the factory grommet. My throttle shaft was rather tight so I did not do anything to it. For the tbi/carb "hat" I used a light coat of silicone on the mounting surfaces.

@mr.2trucks485

Жыл бұрын

@@1985hond125 what all did you do to your vacuum system to get it ready for boost?

I'm building one right now for boost. Must ask did u regap the rings. That's what I'm at right now. My OE ring gap was very tight, .015 and tighter, not idea for turbo

@1985hond125

Жыл бұрын

@2Discover EDM I did not gap the rings. Not sure what a good spec is for a 350. I've been looking into doing a 5.3L LS build and it sounds like a good ring gap for boost is .025"-.030". Good luck with the build.

@2discoveredm788

Жыл бұрын

@@1985hond125 those specs are exactly what I am aiming for on gapping my rings. Good luck to you. Ls is a beast. Feels nice, then they have direct injected Ls motors, the are crazy fast for plain stock Ls. But we cant afford those or we would have them

The stock tbi fuel pump will put out 15psi

@chadjennings3907

Жыл бұрын

Eh. They're rated for 15psi and then regulated.... new. Most of them push 10psi. Best thing to do is add a fuel pressure gauge and adjustable fuel pressure regulator.

Did you swap in the nv3500 transmission. I would like to do a manual swap on my 96 k1500

@1985hond125

Жыл бұрын

@cmbrewer84 The previous owner had the nv3500 swapped in. However, if you can find a similar year 5 speed truck (k1500 pickup) at the junk yard you can snag everything you need to do the swap and make it look factory. The NV3500 has been a good trans.

@cmbrewer84

Жыл бұрын

@@1985hond125 thanks man I appreciate it. I have been wanting to do the swap for a while. It’s not too many videos out there but I think I can get it done. Great video

What's your gas mileage like?

Ever dyno it?

Shoot me a message? I need some input on my 1994 I wanna do the same thing

Copper sweat joints under a hood....that's a first for me lol

Curious if it boosted your mpg or anything

@1985hond125

Жыл бұрын

@cameronbaker9299 This setup probably hurt my milage when driving around town/shorter trips. However, I think it increased highway MPG by about 5mpg. Maybe around 17mpg highway cruising now.

I wanna see this lowered with radials on all fours this would be a sick ass 90s obs "track hawk killer"

@davidredsport1886

9 ай бұрын

thats honestly the plan i have with my obs yukon, these things weigh less than a trackhawk.

@Gratitude6ixty9ine

9 ай бұрын

@@davidredsport1886 daamn bro update?

Hey if it’s possible could we talk on face book or something I’m looking at doing this to my 87 1500