Simple steps to tune your bow and improve arrow flight. www.raptorarchery.com
Жүктеу.....
Пікірлер: 19
@tylerbhumphries3 жыл бұрын
This was very informative. I live in a city that doesn’t have any training facilities near by. We have some in our countries but they’re more than 45+ minutes away from me. I’ve been teaching my self traditional archery through KZread and several of your videos have helped me. Thank you.
@daveb11494 жыл бұрын
Some very good points there Bud that I would never have known or thought about. Cheers.
@fahlvfaust677
3 жыл бұрын
Sir..if an archer wants to use a clicker, should he take a measurement of the full draw? Then cut the arrow according to the full draw result? Sorry, I just want to start using clicker, so I need to ask ..tq
@fahlvfaust677
3 жыл бұрын
Sir..if an archer wants to use a clicker, should he take a measurement of the full draw? Then cut the arrow according to the full draw result? Sorry, I just want to start using clicker, so I need to ask ..tq
@zaghardtakal73385 жыл бұрын
Very informative ! Thank you very much for making this video.
@the_orange_shepherd69386 жыл бұрын
So I am looking at getting into traditional archery. Been watching videos to learn before diving into a bow. Your videos are very informative. In this one you talk about how you set the bow differently between split fingers and 3 fingers below for your release technique. Could you do a video on how to set the bow up differently and the advantages and disadvantages of each? It would be greatly appreciated. Thank you!
@waterlogged67756 жыл бұрын
Great video, it really helped me out, thanks
@Aaron-ud6wk7 жыл бұрын
I build fully bending longbows. Shoot off the knuckle. Never once had I thought to increase my brace height. Thanks!
@WV5914 жыл бұрын
nailed it. TU.. if you find the sweet spot on these two, you can shoot any arrow with high accuracy. nock point can be very difficult to set correctly and it makes the huge difference.
@garychynne13777 жыл бұрын
Enjoyed the show. Gare
@brentfrank70122 жыл бұрын
I’ve watched two videos where you suggest tuning brace height but you haven’t discussed how to change the brace height for tuning. I’m sure it has to do with string length but I’ve never seen it done.
@ItsMeKevinFPV7 жыл бұрын
thanks
@oddish22537 жыл бұрын
More Videos pls.
@hongsezuie4 ай бұрын
Literally NO other video explains the why nearly as well you do.
@markchambers16047 жыл бұрын
do you sell bows like on your video. ty mark c.
@RaptorArchery
5 жыл бұрын
Yes we do Raptorarchery.com
@almollitor8 жыл бұрын
Nice presentation, but it seems counter-intuitive. I would have thought the self bow would have benefited from a higher brace height to bring the angle of the arrow closer to the desired line of flight.
@RaptorArchery
8 жыл бұрын
+Al Mollitor Yes , you are correct , however the limbs need to return as much as possible to achieve full potential of the stored energy, there is as with most things a balance point that needs to be found between the two .
Пікірлер: 19
This was very informative. I live in a city that doesn’t have any training facilities near by. We have some in our countries but they’re more than 45+ minutes away from me. I’ve been teaching my self traditional archery through KZread and several of your videos have helped me. Thank you.
Some very good points there Bud that I would never have known or thought about. Cheers.
@fahlvfaust677
3 жыл бұрын
Sir..if an archer wants to use a clicker, should he take a measurement of the full draw? Then cut the arrow according to the full draw result? Sorry, I just want to start using clicker, so I need to ask ..tq
@fahlvfaust677
3 жыл бұрын
Sir..if an archer wants to use a clicker, should he take a measurement of the full draw? Then cut the arrow according to the full draw result? Sorry, I just want to start using clicker, so I need to ask ..tq
Very informative ! Thank you very much for making this video.
So I am looking at getting into traditional archery. Been watching videos to learn before diving into a bow. Your videos are very informative. In this one you talk about how you set the bow differently between split fingers and 3 fingers below for your release technique. Could you do a video on how to set the bow up differently and the advantages and disadvantages of each? It would be greatly appreciated. Thank you!
Great video, it really helped me out, thanks
I build fully bending longbows. Shoot off the knuckle. Never once had I thought to increase my brace height. Thanks!
nailed it. TU.. if you find the sweet spot on these two, you can shoot any arrow with high accuracy. nock point can be very difficult to set correctly and it makes the huge difference.
Enjoyed the show. Gare
I’ve watched two videos where you suggest tuning brace height but you haven’t discussed how to change the brace height for tuning. I’m sure it has to do with string length but I’ve never seen it done.
thanks
More Videos pls.
Literally NO other video explains the why nearly as well you do.
do you sell bows like on your video. ty mark c.
@RaptorArchery
5 жыл бұрын
Yes we do Raptorarchery.com
Nice presentation, but it seems counter-intuitive. I would have thought the self bow would have benefited from a higher brace height to bring the angle of the arrow closer to the desired line of flight.
@RaptorArchery
8 жыл бұрын
+Al Mollitor Yes , you are correct , however the limbs need to return as much as possible to achieve full potential of the stored energy, there is as with most things a balance point that needs to be found between the two .
@tzenophile
5 жыл бұрын
that is why it is called the archer's paradox...