Making mistakes are how we learn. You did good, taught yourself, and everyone that watched a lesson. More than I've done for the world tbh

@memyselfandi6422

4 жыл бұрын

Stanley Steamer - KZread is hardly "the world" .

@Prince_Dracula

4 жыл бұрын

memyselfandi I don’t think anyone asked. I think this guy was just trying to be positive and you proceed to do what almost everyone on the site does: take a massive shit on everything positive because your lives are miserable. And again if you didn’t, see the first time: no one cares

@doiron12

4 жыл бұрын

@@Prince_Dracula Cheers to that!

@memyselfandi6422

4 жыл бұрын

@@Prince_Dracula There's so many things wrong with what you said : 1. " I don't think anyone asked ". - Um, Asked what, as I didn't answer a question, I made a comment referring to something ridiculous which Stanley Steamer said. You do know the difference between a question and a comment don't you, actually you don't seem to know otherwise you wouldn't have made that brainless statement. 2. I don't have a miserable life, my life is great actually, I have more than enough money to do with as I choose, I don't have to answer to anyone for anything and I am a very happy person. 3. "And again if you didn't see the first time: no one cares." - If no one cares then why did you reply to my comment, you obviously care enough to waste your time to make nonsensical observations, so thank you for contradicting yourself.

@memyselfandi6422

4 жыл бұрын

@@doiron12 lol, you're another one who agrees that no one cares about my comment, yet by agreeing with everything which charles thomas said, you obviously care about what I said also, so thank you for contradicting yourself as well.

"I need to turn off the thermal paste." - Vince 2020

@GhostReaper2043

4 жыл бұрын

lol

@phillipzan2005

4 жыл бұрын

He needs to make shirts and I'll buy one if it says "I need to turn off the thermo paste."

@qsjuggaloqs

4 жыл бұрын

🤣😂☠️

@ericlegacy8834

4 жыл бұрын

@@phillipzan2005 I would buy that! lol

@lrdalucardart

4 жыл бұрын

@@ericlegacy8834 nah you can't, you would need to apply some CPU over it 1st.

You know what I appreciate? You do fixes while showing them completely uncut on camera. You only fast forward on parts where you're undoing a screw, or soldering something. And you do everything without really giving up. And you only give the repair a break if you've gotten nowhere with the repair. And then follow up when you find a breakthrough with the repair. I really do appreciate it.

When my girlfriend wants to de-sress, she watches the Kardashians. I watch Vince break consoles.

@karfg1451

Жыл бұрын

Thats a good one.

Getting flashbacks of the "let's use a disc to pull the other disc stuck in this Wii console" episode D:

@davesides2843

4 жыл бұрын

Haha that was the video that started it all for me.

@MrKeebs

4 жыл бұрын

That brought back some memories for me as well :)

Some new info has recently surfaced, the chip balls are usually ok, but those shinny chips are the issue, their underlay was defective from day one, heat cycles break the joints to the main chip. Also you can now transplant the 40nm chip from ps3 slim. Nec tokens are a short repair anyway as they dont go wrong usually, although replacing them does allow it to usually work a few weeks.

@realKryptic17

Жыл бұрын

Chip bump, in fact it's the same issue they theorize is related to fat 360's.

@Elmantukas

Жыл бұрын

@@realKryptic17 thats very true, they must have had some serious manufacturing defects going on

This is why i like when you upload failure videos - community now knows how to DON'T delid CPU and that knowledge is very important. PS. Your brute-force style was amazing xD

@Mymatevince

4 жыл бұрын

Haha, thanks Solve IT. In all seriousness though it is really important like you say. When people watch things on KZread they often don't realise that the person doing the job may have done it 50 times before. This de-lidding on the CPU is really hard to do, and I would imagine that most people fail the first few times they do this but that isn't normally shown. I knew I would get grief over this video but because of it I now know to try Molybdenum wire next time. That may work and then help others out. At the very least it should serve as a warning to not attempt it without proper tools. Lol, I did love your comment :-)

@113odyssey

3 жыл бұрын

@@Mymatevince Did you ever give the Molybdenum wire a go? I've heard others suggest fishing line but haven't thought of Molybdenum. Couldn't that potentially scratch the die on the CPU as well?

Never stop trying to do the hardest parts Vince, it's what makes your videos.

Vince mate you’re doing amazing. I keep watching your channel and it makes me aspire to do the same. It’s the problem solving I’m addicted to. There’s a great satisfaction fixing things you once knew nothing about. It may sound daft but it has always amazed me how electricity travels through metal that converts it all to a computer processor. It’s incredible. It makes you wonder what else you could achieve. Anyways I’m rambling loving your work and I wish you all the success and good luck you deserve.

I've been watching your videos for a while now Vince. I'm not into fixing stuff myself, but I do take your advice and watch your videos "purely for entertainment." It's nice to see how far you've come along. I remember your early videos; you used to always start out with your multimeter. You hardly do it now. It's great to see how far you've come. Thanks for all the great videos and keep entertaining us. 🙂

Aw man, sucks that that CPU chip broke. We've all been there with electronics projects - the feeling when you accidentally break something is gutting... On to bigger and better things eh? Thanks for still making great videos, and showing when it doesn't go right! Because that happens!

mad respect to you Vince! I could hear and feel your pain brother! it's all a learning process working on consoles and this is such a good resource for me and anyone wanting to learn how to work on PS3's! I once tried working on my psone and I ended up killing the board completely! but guess what, it was my first time doing so and I felt absolutely terrible! but I learned my lesson and guess what? I too was not using the correct tools for the job! I didn't do enough research and did not prepare for the job!

In reference to your comment about making a shorter video, I honestly enjoy the longer ones. Here’s hoping you keep at it!

Was just curious, I`m into cleaning/fixing my old consoles these days :) stayed for the music and the guy with major guts and a great attitude, Who knew fixing a ps3 could be such a thriller. Glad it didn`t blew up. Sorry it didnt work out. I sympathize. But thank you for sharing. Many of us could learn a lot from this.

It was an enjoyable watch Vince, and sometimes the only way to learn is to fail, none of us are perfect, keep up the great videos mate! Ps, dont forget we all learn with you too!

Some you win some you lose! Nice of you to show that it is not easy and if you fail you can always learn something! Keep up the good work!

Great video Vince. Sometimes my determination to fix everything gets the better of me too!

removing those without hot air?! Absolute madlad

This is the best tutorial to date. I’m always checking up for new techniques because delidding a PS3 is difficult and risky. Hopefully a safe, consistent, and easy technique will emerge someday, but what we have now isn’t so bad with practice. While there’s nothing ground breaking here over the previous best video, it demonstrates the process better to see it done by practiced hands. There’s no benefit to applying heat, and the best place to start on the GPU is at any of the corners and not the glue gap across from the NEC\Tokins.

FINALLY. ASKED FOR THIS WEEKS AGO 😂. Thank you Vince

Great video mate! It’s okay to mess things up to teach us not to do it. The videos on here only show the successes not the failures. It’s why I subbed.

Argh!!!!! This was going fantastic up to the point you took a crowbar to that IC cap!!! Great video though! You've proved that the caps were the issue again I think! We live and learn! Maybe try some light heat (just as you start to lever) next time, maybe even try and get some IPA under there to see if that helps with the seperation? "Turn off the thermal paste!!!" LOL!! That's the sort of thing I would normally say!

Nice attempt vince it’s all learning. I learn a lot watching your videos. Keep up the great work. Shame this wasn’t fixable but at least next time you will have more knowledge and able to fix the next one

You rule, Vince! Really. I can't tell you how many times I've used a video of yours to make sure that I'm on the right track or a particular method is *likely* safe. Thanks a ton! I'm currently doing this exact fix and I'll try to reply back when done to post results. You may not even see it but others might and that's what counts.

"im just going to ease them off" proceeds to brutally assault capacitor with a screwdriver

That tiny glipse of life then being faded away ripped my heart a tiny bit, but it was a learning experience for you, so it also has a bright side! :)

Don’t be hard on yourself Vince, this is a video that we all hope to learn from wether you get it a good result or not. I really enjoy these. You did get it going which is a big plus 👍 & we learn’t what is under the lids & how delicate it is. Some people on here need to learn manners in relation to their comments 😔

You are so good with the stuff you are doing keep doing this i love your job . A fan from greece

As entertainment a riot, as a learning experience - painful but helpful. You still have a great average on fixing things, much better than mine. Shop littered with failed attempts.

Hey man, sometimes you win, sometimes you learn. Never lose. :) Thank you for making this video so that we can all learn together.

we learn from your mistakes and your successes :) but sometimes it is,nt all about the end product , the journey is the important part and what we learn on the way . keep up the good work vince

Going back to 8:04 in the video, those capacitors were made by a company called AVX, as you can see in the label. I used to work for that company back in 2000. TAJ after the name AVX refers to the profile of the capacitor and it was one of the profiles I used to make. Incidentally a company called Kemet manufactured the original Tokin Capacitors that you are replacing here and Kemet used to supply us with the Tantalum powder that we used in manufacturing. That brings back so many memories ;) Gutted about the damage at 29:15 but as you say, you now know for the future. Great video, thoroughly enjoyed it, keep them coming ;)

A great idea I've heard to prevent overheating is to remove the power box from inside and put in an external case like the 360 did. Use the now empty area inside to install an additional fan. I know someone that did that, and it works perfectly!

Been waiting for this one!! Don’t beat your self up. You did an excellent job replacing the Nec Tokins and brought the system back to life!! Awesome job. On de-lidding.. You gave it a go and it didn’t work out this time. Next time you’ll come back with a better approach and with proper tools ( 1 and 2 painters knife worked well for me). You have a better feel for what you’ll be getting into next time. Also this shows people that try to attempt this just what can go wrong if you rush a little. Not being negative I love the video and hope to see you tackle more of these PS3’s! ( CECHA01, B01, E01, C01, A00 if you can get your hands on them😊)

This was brillint Mate. Awesome work.

This video gave me cold sweat, but it was very honest. I am pretty sure even professional repairmen make such mistakes, they just don't post them online. Your technique for replacing the capacitors was nice.

Proper good job there Vince, nice soldering technique, i should try that out, shame the CELL delid went wrong, don't worry about, i was in the same tracks on my youth, used a kitchen knife instead, on my G04, oh well youth stupidity. What can i advise is to delid only the RSX, the CELL use the Eraser Method, i have a guide at PSX-Place, basically the Eraser acts as a pressure sandwich making contact with the die and and the IHS, avoids deliding, but if you have the tools and the guts go for it, with the painters knife is still a huge risk, i always wanted to try with a thin nylon line, but after my failed G04 CELL delid back in 2011, i sweared not to delid any more CELLs in my life. Don't let that delid discourage you though, keep at it 👍

@Mymatevince

4 жыл бұрын

Thanks Naked Snake, I have just purchased some 0.08mm and 0.14mm Molybdenum wire and some little handles to attach it too. Might work???? Worth a try. I like the idea of the eraser method, certainly a lot safer :-) Feel free to post a link to that page on here if you like. I can always take it out of spam if it doesn't go through. I am expecting a lot of grief on this video but I think it is important to show how hard it is to do. The knife would need to be less than 2mm, flexible but also rigid!!! Even then I think with the amount of force needed it could well end in a scrape or 2 or in my case 200 :-)

@reyes7133

4 жыл бұрын

@phim q really

@eynotj7011

4 жыл бұрын

saw your tutorial on psx , my ps3 slim's acting weird, it turns off when playing games like rdr but its fine when playing gta v, is it a nec/tokin issue? Should I replace it all or just the rsx? thx

I've an old non-bc that has the high fan Rev whenever the machine is turned on. It's totally bogus and I can only think I could reinstall webman but I never once assumed it had to be delid!! That was quite a thing to see. I really appreciate these ps3 videos being as it's my favourite console. Plus the capacitor replacement is a REVELATION. your vids prove that so many ylod can now be saved from the scrap yard. Especially those glorious 60gb cechA/Bs out there in the wild. Great video keep it up, mate! Cheers.

The way you removed those NEC Tokin capacitior's was impressive. My removal was a total pain. Even after heating them and taking a solder iron to them I had to break them down bit by bit. Next time I'll try your brute force method. Nice video.

Hey Vince, loved your video. Here is a tip,Guitar string does wonders when trying to pry off things like these. You you def try that, you’ll be amazed how good that works

What a shame vince, it was coming along great. Great video anyway!

Shame about the end result, you were so close to restoring it to its former glory. Good attempt, sad for the console but happy for the entertainment and genuine effort.

Vince - When you are in sensitive areas using a heatgun and you want to control where the heat is going, I use plumbers putty to cover small capacitors to stop them getting knocked off accidentally. Just cover the parts you don't want to heat up and remove and reuse the putty afterwards and costs about £3 for a tub. You can also use plumbers putty as a clay bar to clean your car if you feel inclined.

+ 1 Subscriber I love the Nintendo videos they are really helpful and your voice is awesome

Good video, butchered that poor cell though. If you ever try it again in the future(delidding I mean) consider getting some palette knives like used for oil. painting. Super thin but no sharpness. It's how I performed a delid recently on an A01. The specific ones I used for anyone curious was made by Arrtx and were some from amazon for about 6 usd(a 5 piece set). I used the number 1 and number 4 and just took my time(NEVER angle the tip down towards the chip, ideally keep it parallel or bend the tip to point up slightly). I've also heard of at least some people in the community performing the delid with fishing line. Alternatively find someone in the community who has done many successfully and get them to do it. Still just absolutely amazing to see this repair in the wild like this demonstrated(the nec tokin I mean).

Thanks mate, appreciate the insight and wisdom. Cheers, from Australia.

Always worth a try with these things, you did the right thing by trying to fix the thermal paste, no need to feel bad that its broken now, you didn't make it worse or better but you now have more experience and that is what matters :)

@bloggs24

4 жыл бұрын

Yeah exactly, he made it better THAN worse, much worse lol

Hey Vince! I don't own a PS at all but appreciate you taking one for the team! On that main chip (CPU) that you say you mangled, it looks like it sits on top of the main board? Perhaps in the future you can take that whole board off and put a new one on? I have no idea what that entails or even if it is worth the effort but it would be fun to see you try!

Vince it was an initial success followed by a hell of a lot acquired knowledge...that’s a win in my book ;)

well done on those caps Vince, you got it working which is a result. must admit i was cringing when you were digging into that corner but now you and the rest of us know not to :-)

Loving all the tut tut experts on here vince, if they’ve watched enough of your videos they’ll know you’re all about the learning, keep entertainI guess bro 😊👍🏻

@BloodyClash

4 жыл бұрын

Correct. And i've always been a huge fan of vince. But it seems his skills went backwards. Seeing how he uses brute force really is disappointing after all the time. But you're right: it's for entertainment...

Absolutely. The amount PS3s that were scrapped due to misdiagnosis, was really unfortunate... Especially the 60gb models 😭

Absolutely love your videos. Found you by accident, subscribed instantly.. all the best.

Honestly vince you had a good crack at it and learned a lot along the way you can't be too harsh on yourself. In hindsight I think you shouldve just put new thermal paste on it and put the 5p back in the clamps to see if that made any difference at all before going down the route that you did etc that way you wouldve completely eliminated that possibility. Anyways great vid as always.

Hard job, but good job! Thank you for keep doing that!)

thank you for your video - also when it goes bad - i learned a lot from this video - thank you very much

Both the cpu and the gpu can be replaced, they call it the "frankenstein" ps3, apparently it has been a thing for years in certain parts of Asia, but only recently the western community found out about it and managed to somewhat perfect the method of doing so. Usually they do it to replace the old 90 and 65nm RSXs due to a manufacturing issue that nvidia was having at the time where they used the wrong type of underfill for the type of 95% lead solder balls they were using so it caused them to crack much earlier than they should so they normally replace the 90nm rsx with the 40nm from the later slim models, the early revisions of the 65nm rsx also had the same issue, unfortunately you can't use the super slim's 28nm one because it isn't compatible(yet?), Honestly it's just more trouble than it's worth.

I saw the Part of the delid of the CPU and i was thinking "No no Vince, dont do that" .. but .. it was to late :D

I admire your efforts vince, i would invest in a ir heater (even a preheater) the trick with these ps3 boards is to get alot of heat into the board.i usually set the lower heater to 165c, then a top heater will come off in 20 secs without damaging anything. cutting is a big no no and screw driver eek.

Great vid Vince! I wouldn’t feel too bad about the damage to the CPU, delidding the CPU would have fixed the issue, even if you just changed the RSX thermal paste, the issue would most likely still be present as I believe the CPU is used for fan control anyway. If you had of left it was it was the PS3 would have died for sure. Love your videos!

Excellent video. Super interesting topic.

Hey Vince, I see you upgraded your editing software, the background music is very nice and relaxing!

@nowonmetube

4 жыл бұрын

Not the marching music though :(

Love your videos vince only problem is I need more videos to fulfill the mymatevince fix I now have

hey vince! love the channel! i was trying to find a good deal on those capacitors any recommendations?

I like to watch your videos because you do stupid things like me trying fixing stuffs. Last year I cracked a DS Lite board in the middle trying to remove the cart slot :)

Damn!!.. So close but no cigar.. at least you now have a go to as to where its safe "an area that looks like ground" to start decapping your next attempt.. APU I dropped a like..

Don't feel too bad, Vince. You've got to break a few eggs if you want to make an Omelette. If I had to guess, though, Thermal paste might not have helped there. Sometimes you'll get that ramping fan behaviour if the power supply is overheating. Given the state of that PS3, though, it could've been anything.

Good effort. I cracked the entire corner of my gpu chip off when I gave it a go 😂

Why is it you find the videos you need AFTER you make a mistake? I’ve watched countless videos of de-lidding and felt confident. I felt like you did after you removed the CPU plate, which was very difficult to remove. I decapitated two NEC Tokins before the plate came off. The GPU came off so easily that I said to myself I should have done this side first and then tested it. It doesn’t look like I gauged any traces, so hopefully replacing the two NEC Tokins will get me back to playing. I’ve always told my kids that it’s better to learn from other people’s mistakes than from your own. I subscribed so now I can do both. 👍🏻

Not bad, you learned something new which is always worth it. ;) I have a PS3 here that overheats but I am sure it is a combination of pet hair and cigar smoke that has it clogged up. I just have not had time to tear it down and I have a good working one to play with. lol

We live, we learn. We move on. Really enjoyed watching ❤

I did my first one of these a few weeks ago, lucky for me all went well.

"turn off the thermal paste???" -My Mate Vince 2020👍👍👍

The dried out thermal paste under the ihs was the original issue. I mucked up my first try also. Now I use Two double edge old school razor blades like in a paint scraper with a pair of channel-locks.

I actually really loved the capacitor replacement. I've seen people try to heat the capacitors to try and pull them off, but honestly, since they are getting tossed anyway it seems like breaking the capacitors to avoid potentially damaging the board is the way to go. I know you have said in other comments that you were getting a different tool for delidding the CPU, and someone might have already said this, but no matter what tool you use the silicon that is used to glue that IHS to the CPU is actually fairly soft even when cold. Some say they heat the CPU before delidding the CPU but it isn't really necessary and if you feel much resistance I would back the tool off and just check that it is thin enough and not hitting embossed metal lip on the lid.

Hi Vince. Great vid as always, I find your stuff sooo relaxing and enjoy them very much. I have an old PS3 fat that died (YLOD). the Bluray drive is knackered as well due to trying to remove a dvd that was stuck in there as the machine died in the middle of a film I was watching (I hadn't learned about the little eject hole back then). I'd be genuinely happy to donate it, it's of no worth to me. I was going to salvage parts from it but just haven't gotten round to it and it's just sitting in a back room gathering dust. I doubt I'd be able to get anything useful from it. I was just thinking you might be able to try removing the CPU from it to replace your destroyed one or, more likely, do the cap replacement and replace the drive. Anyway, it's just a thought and an offer. The thing is of absolutely no use to me and I really don't care what happens to it. Thanks again for all your vids, I really look forward to them, the longer the better. I hate the over-edited and shortened ones that some youtubers put out, Yours are just right, even my grandson is transfixed whenever I out on one of your vids (he is autistic and very hyper active. I'm teaching him to solder and make little electronic kits and it really seems to have clicked with him), which is amazing! All the very best, DocBanzai

@nowonmetube

4 жыл бұрын

Do it!! (by that I mean donate it)

I've delidded a couple of ps3s in the past and honestly I recommend some painting knives for removing heat spreader on the CPU. You can sharpen the tops to help initially break the glue and for the GPU, just use a thick business card and a PCI bracket with some heat. It should just pop cleanly.

You should have used a razor blade to cut the adhesive in the corners diagonally first, making sure to cut the side where it contacts the IHS not the PCB, you achieve this by putting pressure on the blade upwards. Once all corners are cut through you can move to cut the sides.

You fixed it , till you broke it lol Really enjoy your videos

Vince, I recommend using really strong nylon sewing thread. Put it around the lid and use it as a garrote to try to cut through the adhesive. Unfortunately, I also screwed it up because I got impatient and used a sharp instrument that was too thick. Using nylon thread is time consuming but 100% safe.

@krzysztofk.8842

2 жыл бұрын

Good idea. I will try that next time, is there a video of someone doing that?

always remember to turn off your thermal paste

That’ll teach me to post a comment before I’ve watched the whole video... It was interesting to see the replacement capacitors do the trick initially as I thought a yellow then red light was basically unfixable. It’s a shame it ended how it did, but you live and learn. It was clearly overheating so you had to try something, so don’t be too hard on yourself.

cpu is matched to nand and the drive, and is a massive pain to swap them!

@davidbentham9586

4 жыл бұрын

not to mention reballing headache

@Mymatevince

4 жыл бұрын

Thanks tecfixed :-)

@tecfixed2840

4 жыл бұрын

@@davidbentham9586 especially that many balls!

@davidbentham9586

4 жыл бұрын

@@tecfixed2840 Haha, yeh.i dredd that task the most.

@Prince_Dracula

4 жыл бұрын

My Mate VINCE liked and subbed, thanks for the content

Use Molybdenum Wire to cut through using heat also, we use it to separate Samsung screen from the touch pannel

@Mymatevince

4 жыл бұрын

Thank you. I like the idea of this, I wonder what thickness would do the job. I have seen 100m of 0.08mm wire on eBay with the screw down handles. Do you think 0.08mm would be too weak??

@martinthompson3940

4 жыл бұрын

@@Mymatevince 0.08 sounds a bit to thin and weak considering how much force was needed to lift the 2nd problematic lid, I use 0.11mm if it helps to remove screens from touch pannels and even that snaps but the wire is cheap and works

@Coolrogers90

4 жыл бұрын

awesome

@Mymatevince

4 жыл бұрын

@@martinthompson3940 Thanks Martin, I have just ordered up some 0.14mm Molybdenum wire, I also got the 0.08mm because it came with handles to save ripping into my fingers. Hopefully this may make the job doable in the future, if not then I am sure it will be useful for other projects. Thanks again :-)

@andersmmvfc.8376

4 жыл бұрын

Nice one!

Tip if you ever run into simular issues in the future. You can kind of tell where the leads will be under there before you attempt to remove it! If you have a look around it on the outside, you can see where the leads are getting fed in/out of the chip. So perhaps one side could be safer to enter than another. Just to minimize the chance of hitting something bad when you have not tried it before.

Just the thermal paste and something like a penny to hold those aluminium blocks against the lid and keep things tight a bit , you already did the job with the capacitors 🦾🦾🦾 good job 👏🏼

hang on to it and i think you should learn the art of reballing Vince once you do it a few times its really not that bad and its not that hard with the right tools but can be a little costly i have faith in you !

I love your Videos

Excellent video! Don't worry about making mistakes, you have done us a big service so that we don't screw up our boards! :) Why is it always the capacitors on the bottom side? What about the top ones? (near the lids)

Very good example of fix it til its broke ;)

Not a waste of time at all, delid makes a huge difference to temps, and we all learn from making mistakes. I've killed a PS3 with just one tiny scratch to the CELL in the past, that pesky adhesive is very strong. Next time use a painters knife, you can also use a sanded down (both sides!!) nail file or a thin razor blade. It is key to use a thin tool very carefully and slowly. Good luck. Thanks for the YLOD guide, will be attempting soon on two fats.

Awesome video.

Great video Vince! I would really enjoy a series of fixes from PS1 to PS4 (fat and slim models)!! Cheers from Brazil

Ooooooh another fix it vid, right where's me popcorn ??

@nowonmetube

4 жыл бұрын

Why did I think about popcorn 🍿 like 2 seconds before I read your comment?

The GPU is the one that requires attention 99% of times on PS3. So yes, hindsight. Hey...at least now you gave a board full of spare components. You can even practice CPU and GPU removal for fun. 👍

I know this might be stupid to mention, but have you put back the small capacitor that you knocked off by accident? 24:05

Vince, definitely get yourself a painting knife, doesn't need to be anything special or expensive. I bought one off Amazon after watching a rossmann video and i use it for everything from screen swaps to opening plastic clips to prying off 3d prints, it just works. Honestly one of my top most useful non-soldering related tools.

I remember when you had like 5000 subs , mad

Dude your skills are growing so fast! Nice work!

Even though I don't own a PS3 watching this is interesting