My new furitek stinger system, bearings, and gears are arriving today. Can’t wait to install it all

Here is how I remember- 1 to turn and 2 to burn lol

@08KoolBoy

Жыл бұрын

Ah yes, a true man of culture I see

@expediterfromgeorgia7981

4 ай бұрын

@@08KoolBoyI was gonna comment the same. That’s how I always remember 👍

Remember to line up your u-joints so they are in phase with the one at the other end of the shaft. It am not matter so much on the tiny trucks but will help make the wheel drive smoother. P.S. best knife ever!

man i kept hearing the printer thinking wtf is going on with the audio, figured it out like a minute right before it was mentioned. Nice build btw! I dont have a crawler yet and this is looking tempting.

That gorilla tape is awesome! Also I love the pro x’s! Especially after they get broken in.. but that’s most tires!

I have used the clear gorilla tape for a couple years now.... it works great!

I might have to look into making one of my TRX4Ms brushless. I just ordered a second one. LOL

Great video bud looking good nice jeep

Yes that is what I use now for servo tape. It might even b better

Super cool Tony

it would be interesting to see it with the low gear set. I think it'd also be interesting to see it with the brushless, & the high gear set. obviously wouldn't b any good for crawling, but it'd b smoken fast!

Please show a video with the low range gears I stalled and on 2s and 3 s as well please.

Seems like the punch is turned up to high. I like this setup. Made me not so scared of upgraded these little rigs.

Exciting to see how slow this little outrunners can turn without cogging especially being sensorless...do you have any comparison on runtime between brushed/brushless setup?

I would suggest adjusting the throttle curve slightly and turn down your start up power to low I had seen recently where @exocaged suggested that and it definitely helps with the slow speed jump to running hope this helps !

Let’s see the low end gears for fun🎉

Try turning the punch setting down to 1 or 2 first then try and playing with the throttle curve on the app.

definitely interested in seeing this with low range gears

Nice build. Can you do this same set up with the FMS FCX18 LC80?

I did this with the new Cedar motor and stock gearing. But it was clogging like crazy! I hated it for crawling. I’ll try the crawler gears to see if I will be satisfied with that. Otherwise I’ll stick with an INJORA motor or maybe this setup with the micro komodo will work. I’ll keep watching! Link for the electric driver?

Awesome video! Question, is the Avatar in that configuration water proof? Is there a water proof version that would compliment the Ultimate ESC?

how fast would it be with the HS gears? faster than stock motor?

Deets on the electric screwdriver - my hands will love you😂

@gaffle-411

Жыл бұрын

Your statement sounds like it comes from a Massage parlor worker. 😮

any updates on the throttle control and touchiness?

Just got mine installed. Are the screws supposed to go through the the black mounting plate and make contact with the red/silver plate as well?

New to RC and definitely interested in going brushless on my trx4m. Question though... I have the stock transmitter and receiver (first rc so I dont have a tqi laying around), what would be the cheapest way to get that brushless setup to work? Will any 2 channel transmitter and receiver work?

Hey Tony what electric screwdriver are u using looks pretty fast 😎👍🔥🔥

Is there a place to install the lights from traxxas

Like others have said adjusting the throttle curve will help if that radio has that option or use the flysky GT5 etc. I just wish the furytek stuff wasn't so expensive here in Canada. It is way over 200?$ for a good setup. That's a bit much considering what I already have tied up in it already. Lol. We are talking price of a 1/8th arrma ..lol

@CCxRC

Жыл бұрын

I get it Andy. That does make it pricey.

@Island-RC

Жыл бұрын

I have 3 of them so far at 200 cad a pop. I feel ya. Going to need to wait a little for the 4th one

@crystalwolfmoon2863

Жыл бұрын

all the proprietary spares and upgrades are overpriced for this unfortunately.i bet there are some good lower priced setups yet to be discovered.

Great video my friend! I’m sold I think I’ll do the same!

I have a fly sky gt3b and gr3e rx and was wondering if furitek has a motor and ecm that could* work with what I have currently? Thx!

Will that tire glue last especially with that much torque when utilizing the higher speeds to hop rocks or hit the tail? Noticed a big performance increase with the Furitech electronics. 👍

@CCxRC

Жыл бұрын

When they ship, they should have brass or steel pinions

Can you run that motor with the stock exs ?

What tool is that you are using

I need a Komodo for my Scythe V1 chassis kit...Debating on what to do with transmission, thinking about giving the Mofo RC billet a go.

@CCxRC

Жыл бұрын

I just buy the Komodo installed on the Stellar transmission. Then you get it fully assembled. It's the only way I offer them because it's easy and works well www.ccxrc.com/product-page/copy-of-furitek-micro-komodo-brushless-outrunner-motor-for-scx24

@Wicked03GT

Жыл бұрын

@@CCxRC didn’t realize someone had the combo for sale. I ordered myself one and a ESC for the Scythe chassis I got

hello is furitek waterproof?

I want a 1/18 scaled K10!

also congrats to pablo on 1k views....lol

@CCxRC

Жыл бұрын

I had to leave that Easter egg in there

Just a thought. They make brushless Motors for the Kyosho miniz platform.

@CCxRC

Жыл бұрын

I have one…just no time to install it

@NBC_NCO

Жыл бұрын

@@CCxRC I hear that. With a full time job and a school age child it's tough for me to get to work out in my little workplace.

Does this kit come with a receiver? What’s a cheap transmitter/ I can buy that pairs with this furitek?

@FlailinMonkey

Жыл бұрын

This isn't a kit, you have to buy the motor ($40) and the ESC ($80) then you have to buy the receiver separate ($44). Furitek sells a transmitter ($120) for use with their micro receivers, they also have a transmitter/micro receiver combo for $150. The Furitek transmitters look kinda low quality to me, but some KZreadrs seem to like them. Another inexpensive option would be a Flysky GT5 then you need a AFHDS 2A micro receiver.

You might have said it to n the video but where did you get this motor for it from???

@CCxRC

11 ай бұрын

I got it from Furitek to test before they were released. I now sell their products in my online store. www.ccxrc.com/product-page/furitek-micro-komodo-brushless-motor-with-11t-brass-pinion-fits-t-word-4m

What is the top speed in that setup? Love the videos

@CCxRC

Жыл бұрын

I don’t usually speed test crawlers. I didn’t take the time for this one either. For me it just matters about wheel speed for crawling and it has plenty

can this be used with the fast gears ? would make it faster ?

@CCxRC

Жыл бұрын

Definitely. It would make it pretty quick

When will the scx24 wall hanger be back in stock?😅

@CCxRC

Жыл бұрын

it is now.

Let’s see low range gear please !!

I have that same combo where did you get the motor plate so I can install this? I need to order it ASAP! PLEASE

@Joshman5000

Жыл бұрын

FlubberRC has the adapter plate

@CCxRC

Жыл бұрын

Flubber RC makes one for this motor and the larger Komodo. This one ships with the plate from Furitek

@lordharr123456

Жыл бұрын

Thank you.

That is the single loudest electric screw driver in the world. 😂

Name of that electric tool you were using? Getting sick of using my full size dewalt😂

@CCxRC

Жыл бұрын

This is the screw driver. It’s great amzn.to/3HI8Ajz

@rellis6037

Жыл бұрын

@@CCxRC thank you

Why does my same setup cog so bad

the wires are twisted to reduce unwanted rf / radio electronic interference

After change the ESC the light kit working with the new ESC or not??????

@davidseychell

Жыл бұрын

?

@tonyborg6918

Жыл бұрын

????????????

@tonyborg6918

Жыл бұрын

????????

@davidseychell

Жыл бұрын

@@tonyborg6918 ??????

Mine cogs like crazy and of course can't get ahold of furitek

Can l install this motor on the stock ESC?

@CCxRC

5 ай бұрын

No. It requires a brushless capable ESC

What is that tool used throughout the video?

@CCxRC

Жыл бұрын

amzn.to/3HI8Ajz

TRX 4M was screaming for Furitek so badly

You running it in 2 or 3s?

@CCxRC

Жыл бұрын

Only on 2s so far

1 to turn 2 to burn

Be carefull idk if that gorilla tape is the permanent one or not but it will tear up whatever you trying to pull it off

@CCxRC

Жыл бұрын

It’s more like a putty…like servo tape

Why is that motor spinning like that? Is that something new?

@Sysiphos

Жыл бұрын

It's called an outrunner, they're not that new but less common in cars

I can hear a 3d printer

@CCxRC

Жыл бұрын

You got it! My printers were running non-stop for a while

I was using ear buds and whatever you have running in the background is Really ANNOYING! Otherwise I really enjoyed the show ☺

fast eddy is the goat for bearings.

@CCxRC

Жыл бұрын

They make great bearings