Great video , test was done really well, no bias on your part that I could tell. I’ve ordered the injora motor a week ago, and wanted the metal gears for longevity/ strength, you’ve given me lots to think about , keep up the great work ! 👍

@havikhobbies

Жыл бұрын

Thanks for your feedback! I try to be fair, and just share my thoughts. I'm not paid to sell these things after all!

Great comparison! thank you for the descriptive review

@havikhobbies

Жыл бұрын

Thanks for watching, I'm glad you enjoyed the video!

Great video. Answered all of my questions and now I’m ready for some more upgrades. 😊

@havikhobbies

9 ай бұрын

Thanks, I'm really glad you found the video helpful! Make sure to check out the new MoFoRC Torque Beast X 180 review video if you haven't already! kzread.info/dash/bejne/gJyZw7OxdKu8o84.htmlsi=wo1eEfumpHJHyG2D

Thanks much for the compare.

@havikhobbies

Жыл бұрын

No problem at all! I'm really enjoying the Injora Pro 48t so far.

Love it❤❤ I chose the injora over the hlomes hobby but I really love the build. especially the wheels. Keep it up

Great information Havik, thank you for the detailed video oh and thank you for subscribing and commenting on my first video =)

@havikhobbies

Жыл бұрын

Thanks Dwight! I'm keeping a keen eye on your channel mate, your doing some great work over there!

Great video, I was hoping somebody would do a comparison of these! Also, where did you get the skid plate that's under the front bumper?

@havikhobbies

Жыл бұрын

Thank you! Yes this comparison was requested by a viewer, and it turned out to be a good choice as the little Injora motor is a nice performer! More info and a link to the front skid can be found on this video! kzread.info/dash/bejne/f3tqzKuDidaZlMY.html

I think I might try the Injora Pro motor on my FMS - FCX24 & see if it has a little bit more torque than the FMS - Speed Motor I am running for crawling & trail cruising.

@havikhobbies

10 ай бұрын

Let me know how that goes! That injora pro more makes good torque, I think it would suit the FCX24 nicely!

Do you think overdrive in the front and stock in the rear would help the climb?

@havikhobbies

Жыл бұрын

Yes, you wouldn't loose wheel speed in the rear but rather gain it in the front at the expense of low speed control. It's all a big trade off! And what works best for you depends on how you drive your rig and what you need it to do. I'm more into crawling rather than trailing so I focus my build around slow speed control. Thanks for hanging out!

good day from Canada ,what mode is the esc in ? thanks . i should get my pinion set and injora motor tomorow

@havikhobbies

6 ай бұрын

I always run the ESC in the "Crawler " mode so I have the instant reverse! You can't go with the Injora Pro motor it's awesome! Thanks for hanging out mate!

@larrydrouin2497

6 ай бұрын

i cant wait for the snow to melt so i can find some rocks , do you have any experience with the roc hobby chyenne 6x6 ? , i bought one but find it hard if not impossible to find any hop up parts , cheers

Would have been nice to see the rpm/speed test with the stock traxxas motor too.

@havikhobbies

10 ай бұрын

Check out this video, it compares the stock motor with Mofo Big Block 130 and HH 66T! kzread.info/dash/bejne/a5Nk2NyIXdithqg.htmlsi=lK8HJCJYZVJu_jgv

So if I get underdrive, I put it in the rear axle, correct? I may look at this slower motor from Injora, it may help me in some cases.

@havikhobbies

7 ай бұрын

Correct, underdrive for the rear axle 👍

@RCCrawlerz209

7 ай бұрын

@@havikhobbies Awesome! 🤙🏼

Injora pro isnt waterproof which would be a deal breaker for me . Really good video and nice comparison

@havikhobbies

Жыл бұрын

Thanks mate! Listed as non waterproof on Injoras website however brushed motors typically don't have any issues running submerged in water! There is the little capacitor board on the back of the motor that may be subject to corrosion but a squirt of corrosion x would take care of that. I've not seen a water sealed brushed motor yet, they all let water inside! You need to dry them out and lube the bushings after a good puddle run!

@josephfoster3819

Жыл бұрын

@@havikhobbies yeah figured that would be the only thing that would be an issue , i used to hot glue around cheapo receivers to make them waterproof . Figure you could do the same here

@havikhobbies

Жыл бұрын

Sounds like some experiments would be required!

How do these motors compare in speed to stock motor and stock gearing? Or even the stock motor with low range gears?

@havikhobbies

Жыл бұрын

It's been awhile since I've bothered with the stock gearing because I don't do any trailing. Both of these motors are faster than the stock 87t and have more torque regardless of the gearing. My opinion is these faster motors work best with the low range gears. For crawling I would choose the low gears and probably the Injora Pro. For trailing I would probably go with the low gears also, but opt for the MoFo Big Block! Although I wouldn't trail a Trx4m and would grab my FMS FCX24 due to the 2 speed transmission, but that's another story!

@jakedavid8187

Жыл бұрын

@@havikhobbies yeah I dont really "trail" them but do run on a lot of sand rocks that aren't really technical. Maybe il get the injora, with low trans gears and the helical overdrive gears for both axles.

@havikhobbies

Жыл бұрын

I would start with the $5 low range gears and go from there, the Injora Pro 48t is a great little motor!

Pn racing came out with a ball bearing 180 motor with replaceable brushes.

@havikhobbies

9 ай бұрын

I saw Matt over at 2fmrc check those motors out fairly recently, they look like a great option! My Trx4m Bronco has the MoFoRC Torque Beast X 180 motor in it now and that's probably how it will stay for now! Thanks for watching and for the heads-up!

What happens if you install underdrive in the rear and overdrive in the front? Will that be negative or positive to the rc lol

@havikhobbies

Жыл бұрын

The net effects will be the same as a more pronounced overdrive of the front axle. If it's a negative or positive will depend on what you want out of the truck! I personally prefer a more subtle overdrive effect for general driving. You may prefer more depending on your terrain.

@oliverruelas1562

Жыл бұрын

@@havikhobbies thanks for the response - I’ll let you know if it’s severe in any way… lol

merry christmas. what gear did you put on the rear 22 or 24 . thanks cheers

@havikhobbies

6 ай бұрын

Merry Christmas! I used the 10/24T 16.67% underdrive 👍

@larrydrouin2497

6 ай бұрын

thank you @@havikhobbies

@havikhobbies

6 ай бұрын

No problem, anytime mate!

was this done with the stock gearing or the low range?

@havikhobbies

Жыл бұрын

All testing in this video is with the optional low range "crawl" gears. Both of these motors are faster than stock and really need the low gears if you intend to spend a lot of time at slow speed. The stock transmission ratio is good for trail and OK for light crawling IMO. Thanks for hanging out!

@bkinsman

Жыл бұрын

@@havikhobbiessweet, thanks man. Loved how detailed your analysis was. Got all the parts on the way! just gotta wait for TRX4M to restock in Aus and then we’re rockin & rollin

@havikhobbies

Жыл бұрын

Thanks mate, glad the video was helpful! The TRX4M is one of my favorites, It's a very capable platform and a great size!

Ive got an isdt70 esc on my 4m stock motor stock trans gearing and still on bushings. I picked up an immense amount wheel speed. Im feeling if i went with the injora pro and crawl gears it would be as fast as stock but bith much more low speed control. Not to mention the lack of fax machine noises

@havikhobbies

11 ай бұрын

Yeah that sounds like a solid plan! I love the extra crawl ability of the low range gears!

@reprieverc

11 ай бұрын

@@havikhobbies you should try that esc man it's pretty dang good and it comes with a Bluetooth module so you can find tune the driving characteristics. Relatively cheap as well

@reprieverc

11 ай бұрын

@@havikhobbies oh yeah and I'm doing a mullet build with mine as well. Using fcx24 rear portal. That'll be my underdrive

@havikhobbies

11 ай бұрын

Sounds like a interesting build I'll keep an eye out for it. I may check out the isdt70 esc, it's looks good for the price. Kinda like hobbywing 1080. The next brushed esc I'll be reviewing is the Furitek Iguana Pro with Bluetooth.

@reprieverc

11 ай бұрын

@@havikhobbies I'll be here for it man. I like you your videos wish I had the attention span to make videos like this 🤣

hi havik does this injora 180pro does it has the same size as the injora 50T pro or is it bigger ?

@havikhobbies

9 ай бұрын

The Injora Pro for the TRX4M is a 48t 180 size motor (stock trx4m size). The 50t Pro for the SCX24 is a 050 size motor and is much smaller. These are not interchangeable, but I understand how it could be confusing because they are both "Pro" motors with purple stickers!

@KAarnagemAmolgada

9 ай бұрын

@@havikhobbies here is my situation for my dead bolt the case is closed i will fit the 50T as shown in your tests ...truly i was amazed how such small motor could produce so much torque! know for the real problem..i have a volantex atomic sx 1/24 the motor case measures is 30mm in lenght and about 20mm in width but on the manual it says its a 180a motor and that´s all i got ! it´s bigger than an original scx24 motor it seems to be the size of the 50T but never had one in my hands ...then i saw the new 180 pro and total confusion was installed ! i dont have motor measures and by eye they all seem about the same size!

@havikhobbies

9 ай бұрын

Yeah the TRX4M is much larger and not directly compatible with SCX24. Not sure about the Volantix motor you mention? I've never encountered that motor before!

Do you think overdrive on the front axle instead of under drive rear axle would salvage a smidge more wheel speed while still giving you that pulling effect the different ratios offer.

@grandmasteraj855

Жыл бұрын

I think they make a 9% od ring gear

@havikhobbies

Жыл бұрын

Yes they have the 9% and 16% overdrive. The 16% is not very aggressive IMO. Yes leaving the rear axle ratio stock and overdrive in the front will net the same pulling from the front characteristics, however your essentially gearing UP instead of down so it will affect your slow speed control. You need to decide what is more important to you, speed or control! It's more challenging to have your cake and eat it too with brushed motors!

Great video. I too was looking to get one of those motors. What tires are u running.

@havikhobbies

10 ай бұрын

Hey thanks mate! Those are the Proline Baja Pro X 1.0!

@kevinhill2929

10 ай бұрын

@@havikhobbies Thanks. I have little guy racing tires on one my rigs wanted to try first but those look great on the bronco and seem to hook up well. Check them out if u have yet to do so.

@havikhobbies

10 ай бұрын

@@kevinhill2929 I've got some LGRP 57mm Swap Kings here which are very similar to the Baja Pro X tires. Both really good versatile options!

@kevinhill2929

10 ай бұрын

@@havikhobbies yup those are the once I have as well lol.

@havikhobbies

10 ай бұрын

How do you like them?

Injora say their 180 motor is waterproof (ipx6 or something like that) people here seems to say is not. So is it waterproof or not?

@havikhobbies

5 ай бұрын

I've never fully submerged my Injora 180 motor, but I don't hesitate to run it in wet conditions like a rain, snow, mud etc. I interpret the IPX6 rating as "highly water resistant" but not fully water proof. I hope that helps? Sorry I couldn't be more definitive.

Is it real that the Injora Motor kills the stock ESC? My Defender still runs on the Titan 180 with Low Speed Gearing from Traxxas, it crawles very good so far. Greetings from Germany

@havikhobbies

6 ай бұрын

I've never experienced any issues with the Injora Pro 48t with the stock Traxxas ESC, but like you I only run on the low or crawler gears. I suspect that users that have experienced issues are probably running stock or high speed gearing! I don't tend to push the truck very hard in a bind either which can be very hard on electronics as well. Thanks for watching mate!

Is that holmes motor longer than the injora?

@havikhobbies

10 ай бұрын

No both are the same size as the stock motor and are direct drop in replacements! Thanks for hanging out mate!

@OswaldBeef

10 ай бұрын

@@havikhobbies thank you dude

Is 44t better the 48t?

@havikhobbies

5 ай бұрын

Don't think I've tested a 44t yet. 44t vs 48t is difficult to compare because there's so many variables such as wire diameter and magnet strength that all effects the performance of the motor. The motors I've tested and recommend are the Holmes Hobbies 66t, Mofo RC Torque Beast X 180 and the Injora Pro 48t you can't go wrong with any of those options 👍

메탈기어는 필수입니다 플라스틱 기어는 정말 어이가 없었습니다 . 서보도 풀메탈로 비싼걸로 갈았더니 몇달째 서보도 안정적으로 가능하고 쇽업하니 못가던 곳도 가더군요

@havikhobbies

10 ай бұрын

I haven't had any issues with the plastic Differential or Transmission Gears. I do agree that the stock servo is a weak area, and should have been metal gear out of the box! Thanks for commenting, see you next time!

I bought the same injora 48t, stock electronics suck and cut out at full throttle

@havikhobbies

11 ай бұрын

That's weird! I've not personally experienced that with the stock controller. Is your gearing stock?

@MineCraftPickAxeXL9

11 ай бұрын

@@havikhobbies its a high speed transmission so that might be why i got a 9.7:1 transmission i had to buy another trans because the screws stripped on the motor in the stock transmission but if i slowly let on then go to full speed it works so i think it may be drawing to much power, i am also turning my current trx4m into a rampart mt

@DTW-bx2vy

10 ай бұрын

The FMS -FCX24 has a similar problem when you install a lower turn motor, but it is the included battery that causes it to cut out. The lipo battery has a current limiter aka PCM inside the battery pack, replaced the battery with one that did not have PCM & fixed the problem.

@MineCraftPickAxeXL9

10 ай бұрын

@@DTW-bx2vy so I found out the problem with it is the monster truck tires I put on it yeah it doesn't like that so I had to switch back to the other Wheels that came with it

@havikhobbies

10 ай бұрын

Yeah it does sound like that combination might be pushing the stock controller to the limit. Good thing about the trx4m is there is plenty of space for a 1/10 scale esc like a hobby wing 1080. And you could keep your stock transmitter by getting a Traxxas reciever.

I was hoping for a review of these motors...

@havikhobbies

Жыл бұрын

I hope I was able to provide the answers to your questions! Thanks for subscribing, I really do appreciate your time!

I wouldn't buy either of these motors. If you compare these to a brushless motor (the furitek in particular), the difference is night and day, but I suppose, you gets what you pays for 🤔

@havikhobbies

10 ай бұрын

Brushless is awesome, I run and enjoy both! Some folks are just looking for an inexpensive drop in replacement when using stock RTR electronics!