Thanks for the video. I changed the solenoid, checked the fuse, and was getting ready to test the starter. Then I saw you talking about the three safety switches. I couldn't see the one at the PTO cable. But when I engaged and disengaged the blade a couple of times, the mower started right up!

The inline fuse was blown on my tractor. Thanks you led me the right direction! It Starts!

Some light under as you’re point8ng to stuff would help a great deal

Thanks for the solution to my non cranking troybuilt pony 42". You saved me lots of diagnostic torture...

I watched 10 other people trying to explain this to me they could not do it you my friend or number one I fixed my mower today thank you

Great video. Thanks!

Thank you! You are saving my day right now!

Your lawn sure does look nice. Great video

Awesome video. Thank you

Thanks! My mower is doing the exact same thing! Off to Lowes’s I go!

Appreciate the video! Very helpful! Thank you!

Thanks for the information 👍

Yep. Awesome, and thanks dude!!

Dude, thank you!

Thanks

Need some light to show the solenoid and fuse. I can’t get to the solenoid in mine.

@21toolmantim

Жыл бұрын

I have the same issue, the solenoid is under the mower, outside the batter box and I can't get to it.

thanks

I added the new selonoid but need to jump start it. Any idea what should I check next please ?

How do you hook the wires to the starter solenoid up

Thank you! My problem was the wire that goes to the fuse in the back of the lawnmower hand popped out and wasn't making contact. as soon as I popped it back in...the lawnmower started.

Thanks, mine starts but I have to tap the back a few times and it starts

My battery is white and not black. Do I need a new battery?

What battery does this lawn mower use?

Just a bit dark under there!

Can see anything USE A FLASH LIGHT

How do you change a pulley on a Troy bilt

How did you know that part was bad I’m helping my dad with one like yours and we thought it was the fuse because I changed the one under the battery and it worked for a bit then quit

@fixitfixitmatt4918

2 жыл бұрын

Once I hot wired the battery to the positive on the starter that's the only other thing I could think of.

Thanks was a ground

Ken Stabler?

I suspect a similar problem with a Troy-Bilt Pony I recently was given. The battery checks good, but before I buy an unneeded solenoid, I want to first check the ignition switch.

You do not I repeat do not have to have someone in the seat to start the mower, just have to have the parking brake engaged. Also you can unplug the switch at the seat if one wants to. I unplugged mine so I could get off the mower with the blades still engaged ( in case I needed to move something and didn't want to disengage to get off the mower) but that's me I'm not suggesting to someone with children to do this, just saying it can be done.

@dna2405

Ай бұрын

Also I disconnected the reverse kill switch.

Could someone put the part number on the comment please I wasn’t able to read it .. please

good content on the mower. thank you for your time. here is one question you could solve for me. mine will not start. dont know if you still have that mower, but i am having trouble with mine. it is the same as the one you have, my problem is . . . the fuse box. one wire goes into the harness, the other is loose and i do not know where it was attached to. do a video of where the wires go, especially the loose one [ the one that is not in the wire harness ] . plz do not make the vid short. mower has no juice at the ignition switch because of that wire. thank you . good content !

@fixitfixitmatt4918

2 жыл бұрын

I'll look into it and get back to you. Sorry for late response.

lol Im blind too...

What is the part number

Is there an oil filter for this mower

@jonathan3982

10 ай бұрын

No

I bought mine 6 months ago brand new and it won’t start

update on my mower : someone repurposed the 2 main power wires . red wire and the double red/white wire the problem with the mower that i have was someone crossed the solid red wire with the ground red/white stripe wire . red wire [ starter jumper wire for solenoid ] red wire/ white stripe [ ground wire for hot side of solenoid for the carburetor ] ( is tied in with the safety switch [[ both of them . . .is like a secondary hot wire ]] . everytime i turned the key to crank it , the starter would have a slight click. had to remove the wires from the computator plug with a 90 degree awl to bend the metal catch so i could get it out, and put it in the place it was supposed to be for to begin with. when i had recieved the new ignition switch, all the letters were in the wrong place. had to result to the O.G. ignition switch. good news is, that if i need a new ignition switch, i can always move the female spade terminal plugs to where they are supposed to be. going to make a small correct color wire spade plug so i will know where the wires will go.

@caseynail8439

2 жыл бұрын

so red/white is on the side going to starter or the constant from battery

Dear Friends. Please, help. My left (Driver side. The one with the adjustment gear) of the deck is high. The right side (passenger side. grass outlet side) is low. When lever is on position 4, i.e. the second highest, the right side of the deck scrapes the grass! The gear is all the way up. I.e "Driver side" of the deck is all the way down, but still too high. Do I need a new deck? New tractor? Thanks in advance.

@wessdad4439

Жыл бұрын

I discovered one rear tire was underinflated even though it didn't appear to be when I looked at it when I was standing off to the side. I accidentally leaned on it and that's when I discovered it was substantially underinflated. That was my problem.

@west_park7993

Жыл бұрын

@@wessdad4439 This was exactly my problem.. When you look, it appears fine. However, when you check with the gauge, it is very low. When you press with a shoe, it flexes more. And finally, when you add a human weight, then the difference is big.

@jonathan3982

10 ай бұрын

Could also be your deck needs leveling. My gear on the left side rear hanger is set at the third notch from the top. My deck sits level ( I just recently replaced my mower deck with a brand new one).

@west_park7993

10 ай бұрын

@@jonathan3982 I realized that the problem is in the tires. Suddenly they started to leak a lot. Now I am at the point to adjust pressure before each cut. I added green slime in both tubed and tubeless tires, and it may help just a little bit. Nope. green slime is POJ.

Perdone le escriba en español , pero usted no tiene ni la menor idea de la ayuda que usted me dio con esta informacion , pues mi Lawn mover tractor es identico al suyo y ya tengo informacion del part number y la idea de extraer el solenoid, muchas gracias y que Dios lo bendiga

Is the carburetor hard to clean I just paid 130$ for someone else to do it when I’m thinking next time I could do myself

@MatthewWielicki

2 жыл бұрын

It's not bad at all. Usually you can get a carburator kit for less than 50. I'll post a video about it.

@JCcanU

2 жыл бұрын

Very easy to clean kits start at 20$ for Briggs carb .

Roll Tide!

@dna2405

Ай бұрын

RoLLTideRoLL! He’s right in Northport as well. 👍🏼

Must be the shirt, I would throw it in the trash

@MatthewWielicki

2 жыл бұрын

Roll tide!

@Snail.1

Жыл бұрын

🗑️🚮 for sure 🤣 I've always despised that state 🤦lol

Man, I hope you don't mow your lawn with flip-flops on !

@philipcoffman4372

11 ай бұрын

It’s actually his 16th pair this summer alone. He shreds one pair of sleepers every couple of days pretty much

Lighting was terrible, would have been so much more informative and clear

ROLL TIDE!!!

ROLL DAMN TIDE

ROLL TIDE!!!