Thanks, mine starts but I have to tap the back a few times and it starts
@AnthonyPendergrass-fn9hz2 ай бұрын
Thanks was a ground
@lousadventures21112 ай бұрын
I added the new selonoid but need to jump start it. Any idea what should I check next please ?
@lovelove58073 ай бұрын
Thanks for the solution to my non cranking troybuilt pony 42". You saved me lots of diagnostic torture...
@steveruf65503 ай бұрын
Lighting was terrible, would have been so much more informative and clear
@jimmykinney40863 ай бұрын
ROLL TIDE!!!
@collierleeappraisal3 ай бұрын
Thanks for the video. I changed the solenoid, checked the fuse, and was getting ready to test the starter. Then I saw you talking about the three safety switches. I couldn't see the one at the PTO cable. But when I engaged and disengaged the blade a couple of times, the mower started right up!
@user-zw1yl2vd9y3 ай бұрын
What battery does this lawn mower use?
@teshuvahemmet30363 ай бұрын
Thanks for the information 👍
@brandonnewsome38834 ай бұрын
What is the part number
@nancyfuller49018 ай бұрын
Thanks! My mower is doing the exact same thing! Off to Lowes’s I go!
@johnf.lavelle81928 ай бұрын
The inline fuse was blown on my tractor. Thanks you led me the right direction! It Starts!
@dhd85468 ай бұрын
Your lawn sure does look nice. Great video
@ntashapatterson85249 ай бұрын
Thanks
@user-ny2jp6pl4n9 ай бұрын
Yep. Awesome, and thanks dude!!
@jonathan398210 ай бұрын
You do not I repeat do not have to have someone in the seat to start the mower, just have to have the parking brake engaged. Also you can unplug the switch at the seat if one wants to. I unplugged mine so I could get off the mower with the blades still engaged ( in case I needed to move something and didn't want to disengage to get off the mower) but that's me I'm not suggesting to someone with children to do this, just saying it can be done.
@dna2405Ай бұрын
Also I disconnected the reverse kill switch.
@fattireale7511 ай бұрын
Ken Stabler?
@michaelwiebrand5666 Жыл бұрын
Dude, thank you!
@oldfart269 Жыл бұрын
I suspect a similar problem with a Troy-Bilt Pony I recently was given. The battery checks good, but before I buy an unneeded solenoid, I want to first check the ignition switch.
@davevan8864 Жыл бұрын
thanks
@markcollins5026 Жыл бұрын
Man, I hope you don't mow your lawn with flip-flops on !
@philipcoffman437211 ай бұрын
It’s actually his 16th pair this summer alone. He shreds one pair of sleepers every couple of days pretty much
@thepatriotpartyofamerica Жыл бұрын
My battery is white and not black. Do I need a new battery?
@thepatriotpartyofamerica Жыл бұрын
I bought mine 6 months ago brand new and it won’t start
@rosiehomer1492 Жыл бұрын
I watched 10 other people trying to explain this to me they could not do it you my friend or number one I fixed my mower today thank you
@jeff.adkinsadkins4703 Жыл бұрын
How do you change a pulley on a Troy bilt
@dannyblack4261 Жыл бұрын
Roll Tide!
@dna2405Ай бұрын
RoLLTideRoLL! He’s right in Northport as well. 👍🏼
@pacocortez4743 Жыл бұрын
Could someone put the part number on the comment please I wasn’t able to read it .. please
@antonioverga1541 Жыл бұрын
Awesome video. Thank you
@robertlittle1193 Жыл бұрын
Can see anything USE A FLASH LIGHT
@ReginaBarnett Жыл бұрын
Need some light to show the solenoid and fuse. I can’t get to the solenoid in mine.
@21toolmantim Жыл бұрын
I have the same issue, the solenoid is under the mower, outside the batter box and I can't get to it.
@west_park79932 жыл бұрын
Dear Friends. Please, help. My left (Driver side. The one with the adjustment gear) of the deck is high. The right side (passenger side. grass outlet side) is low. When lever is on position 4, i.e. the second highest, the right side of the deck scrapes the grass! The gear is all the way up. I.e "Driver side" of the deck is all the way down, but still too high. Do I need a new deck? New tractor? Thanks in advance.
@wessdad4439 Жыл бұрын
I discovered one rear tire was underinflated even though it didn't appear to be when I looked at it when I was standing off to the side. I accidentally leaned on it and that's when I discovered it was substantially underinflated. That was my problem.
@west_park7993 Жыл бұрын
@@wessdad4439 This was exactly my problem.. When you look, it appears fine. However, when you check with the gauge, it is very low. When you press with a shoe, it flexes more. And finally, when you add a human weight, then the difference is big.
@jonathan398210 ай бұрын
Could also be your deck needs leveling. My gear on the left side rear hanger is set at the third notch from the top. My deck sits level ( I just recently replaced my mower deck with a brand new one).
@west_park799310 ай бұрын
@@jonathan3982 I realized that the problem is in the tires. Suddenly they started to leak a lot. Now I am at the point to adjust pressure before each cut. I added green slime in both tubed and tubeless tires, and it may help just a little bit. Nope. green slime is POJ.
@samwood92382 жыл бұрын
How do you hook the wires to the starter solenoid up
@MELISSAMDC1042 жыл бұрын
Thank you! My problem was the wire that goes to the fuse in the back of the lawnmower hand popped out and wasn't making contact. as soon as I popped it back in...the lawnmower started.
@SaltyRedNeck4442 жыл бұрын
ROLL TIDE!!!
@antonioking64042 жыл бұрын
Is there an oil filter for this mower
@jonathan398210 ай бұрын
No
@cristopherwittel55492 жыл бұрын
𝖕𝖗𝖔𝖒𝖔𝖘𝖒 🤩
@John-xm7yc2 жыл бұрын
Thank you! You are saving my day right now!
@suzannemink82632 жыл бұрын
Some light under as you’re point8ng to stuff would help a great deal
@floridalife75642 жыл бұрын
Is the carburetor hard to clean I just paid 130$ for someone else to do it when I’m thinking next time I could do myself
@MatthewWielicki2 жыл бұрын
It's not bad at all. Usually you can get a carburator kit for less than 50. I'll post a video about it.
@JCcanU2 жыл бұрын
Very easy to clean kits start at 20$ for Briggs carb .
@young_of_the_mill95602 жыл бұрын
Must be the shirt, I would throw it in the trash
@MatthewWielicki2 жыл бұрын
Roll tide!
@Snail.1 Жыл бұрын
🗑️🚮 for sure 🤣 I've always despised that state 🤦lol
@alfredococa88032 жыл бұрын
Perdone le escriba en español , pero usted no tiene ni la menor idea de la ayuda que usted me dio con esta informacion , pues mi Lawn mover tractor es identico al suyo y ya tengo informacion del part number y la idea de extraer el solenoid, muchas gracias y que Dios lo bendiga
@deborahcuster81422 жыл бұрын
update on my mower : someone repurposed the 2 main power wires . red wire and the double red/white wire the problem with the mower that i have was someone crossed the solid red wire with the ground red/white stripe wire . red wire [ starter jumper wire for solenoid ] red wire/ white stripe [ ground wire for hot side of solenoid for the carburetor ] ( is tied in with the safety switch [[ both of them . . .is like a secondary hot wire ]] . everytime i turned the key to crank it , the starter would have a slight click. had to remove the wires from the computator plug with a 90 degree awl to bend the metal catch so i could get it out, and put it in the place it was supposed to be for to begin with. when i had recieved the new ignition switch, all the letters were in the wrong place. had to result to the O.G. ignition switch. good news is, that if i need a new ignition switch, i can always move the female spade terminal plugs to where they are supposed to be. going to make a small correct color wire spade plug so i will know where the wires will go.
@caseynail84392 жыл бұрын
so red/white is on the side going to starter or the constant from battery
@darlenemiller43582 жыл бұрын
How did you know that part was bad I’m helping my dad with one like yours and we thought it was the fuse because I changed the one under the battery and it worked for a bit then quit
@fixitfixitmatt49182 жыл бұрын
Once I hot wired the battery to the positive on the starter that's the only other thing I could think of.
@deborahcuster81422 жыл бұрын
good content on the mower. thank you for your time. here is one question you could solve for me. mine will not start. < dont know if you still have that mower, but i am having trouble with mine. it is the same as the one you have, my problem is . . . the fuse box. one wire goes into the harness, the other is loose and i do not know where it was attached to. do a video of where the wires go, especially the loose one [ the one that is not in the wire harness ] . plz do not make the vid short. < < mower has no juice at the ignition switch because of that wire. thank you . good content !
@fixitfixitmatt49182 жыл бұрын
I'll look into it and get back to you. Sorry for late response.
Пікірлер
Just a bit dark under there!
lol Im blind too...
Great video. Thanks!
ROLL DAMN TIDE
Appreciate the video! Very helpful! Thank you!
Thanks, mine starts but I have to tap the back a few times and it starts
Thanks was a ground
I added the new selonoid but need to jump start it. Any idea what should I check next please ?
Thanks for the solution to my non cranking troybuilt pony 42". You saved me lots of diagnostic torture...
Lighting was terrible, would have been so much more informative and clear
ROLL TIDE!!!
Thanks for the video. I changed the solenoid, checked the fuse, and was getting ready to test the starter. Then I saw you talking about the three safety switches. I couldn't see the one at the PTO cable. But when I engaged and disengaged the blade a couple of times, the mower started right up!
What battery does this lawn mower use?
Thanks for the information 👍
What is the part number
Thanks! My mower is doing the exact same thing! Off to Lowes’s I go!
The inline fuse was blown on my tractor. Thanks you led me the right direction! It Starts!
Your lawn sure does look nice. Great video
Thanks
Yep. Awesome, and thanks dude!!
You do not I repeat do not have to have someone in the seat to start the mower, just have to have the parking brake engaged. Also you can unplug the switch at the seat if one wants to. I unplugged mine so I could get off the mower with the blades still engaged ( in case I needed to move something and didn't want to disengage to get off the mower) but that's me I'm not suggesting to someone with children to do this, just saying it can be done.
Also I disconnected the reverse kill switch.
Ken Stabler?
Dude, thank you!
I suspect a similar problem with a Troy-Bilt Pony I recently was given. The battery checks good, but before I buy an unneeded solenoid, I want to first check the ignition switch.
thanks
Man, I hope you don't mow your lawn with flip-flops on !
It’s actually his 16th pair this summer alone. He shreds one pair of sleepers every couple of days pretty much
My battery is white and not black. Do I need a new battery?
I bought mine 6 months ago brand new and it won’t start
I watched 10 other people trying to explain this to me they could not do it you my friend or number one I fixed my mower today thank you
How do you change a pulley on a Troy bilt
Roll Tide!
RoLLTideRoLL! He’s right in Northport as well. 👍🏼
Could someone put the part number on the comment please I wasn’t able to read it .. please
Awesome video. Thank you
Can see anything USE A FLASH LIGHT
Need some light to show the solenoid and fuse. I can’t get to the solenoid in mine.
I have the same issue, the solenoid is under the mower, outside the batter box and I can't get to it.
Dear Friends. Please, help. My left (Driver side. The one with the adjustment gear) of the deck is high. The right side (passenger side. grass outlet side) is low. When lever is on position 4, i.e. the second highest, the right side of the deck scrapes the grass! The gear is all the way up. I.e "Driver side" of the deck is all the way down, but still too high. Do I need a new deck? New tractor? Thanks in advance.
I discovered one rear tire was underinflated even though it didn't appear to be when I looked at it when I was standing off to the side. I accidentally leaned on it and that's when I discovered it was substantially underinflated. That was my problem.
@@wessdad4439 This was exactly my problem.. When you look, it appears fine. However, when you check with the gauge, it is very low. When you press with a shoe, it flexes more. And finally, when you add a human weight, then the difference is big.
Could also be your deck needs leveling. My gear on the left side rear hanger is set at the third notch from the top. My deck sits level ( I just recently replaced my mower deck with a brand new one).
@@jonathan3982 I realized that the problem is in the tires. Suddenly they started to leak a lot. Now I am at the point to adjust pressure before each cut. I added green slime in both tubed and tubeless tires, and it may help just a little bit. Nope. green slime is POJ.
How do you hook the wires to the starter solenoid up
Thank you! My problem was the wire that goes to the fuse in the back of the lawnmower hand popped out and wasn't making contact. as soon as I popped it back in...the lawnmower started.
ROLL TIDE!!!
Is there an oil filter for this mower
No
𝖕𝖗𝖔𝖒𝖔𝖘𝖒 🤩
Thank you! You are saving my day right now!
Some light under as you’re point8ng to stuff would help a great deal
Is the carburetor hard to clean I just paid 130$ for someone else to do it when I’m thinking next time I could do myself
It's not bad at all. Usually you can get a carburator kit for less than 50. I'll post a video about it.
Very easy to clean kits start at 20$ for Briggs carb .
Must be the shirt, I would throw it in the trash
Roll tide!
🗑️🚮 for sure 🤣 I've always despised that state 🤦lol
Perdone le escriba en español , pero usted no tiene ni la menor idea de la ayuda que usted me dio con esta informacion , pues mi Lawn mover tractor es identico al suyo y ya tengo informacion del part number y la idea de extraer el solenoid, muchas gracias y que Dios lo bendiga
update on my mower : someone repurposed the 2 main power wires . red wire and the double red/white wire the problem with the mower that i have was someone crossed the solid red wire with the ground red/white stripe wire . red wire [ starter jumper wire for solenoid ] red wire/ white stripe [ ground wire for hot side of solenoid for the carburetor ] ( is tied in with the safety switch [[ both of them . . .is like a secondary hot wire ]] . everytime i turned the key to crank it , the starter would have a slight click. had to remove the wires from the computator plug with a 90 degree awl to bend the metal catch so i could get it out, and put it in the place it was supposed to be for to begin with. when i had recieved the new ignition switch, all the letters were in the wrong place. had to result to the O.G. ignition switch. good news is, that if i need a new ignition switch, i can always move the female spade terminal plugs to where they are supposed to be. going to make a small correct color wire spade plug so i will know where the wires will go.
so red/white is on the side going to starter or the constant from battery
How did you know that part was bad I’m helping my dad with one like yours and we thought it was the fuse because I changed the one under the battery and it worked for a bit then quit
Once I hot wired the battery to the positive on the starter that's the only other thing I could think of.
good content on the mower. thank you for your time. here is one question you could solve for me. mine will not start. < dont know if you still have that mower, but i am having trouble with mine. it is the same as the one you have, my problem is . . . the fuse box. one wire goes into the harness, the other is loose and i do not know where it was attached to. do a video of where the wires go, especially the loose one [ the one that is not in the wire harness ] . plz do not make the vid short. < < mower has no juice at the ignition switch because of that wire. thank you . good content !
I'll look into it and get back to you. Sorry for late response.