Your video was the best. Other have done the same but not clear. Thank you.

Thank you homie for this issue homie it's worked for me The radio seller was wanting me to put in a radio and speaker s amps. I saved 1200 $ thank you

I would like to thank you for this video. I have an E350 2007 and it was the navigation system. I was able to order it with the link you provided and then: WHOA!!!! It’s working! Thank you!!!!

@brickmunoz3528

2 жыл бұрын

I also have the same problem with the 07 E350 radio not working problem atm

@tenjewishnunsyt93

Жыл бұрын

@@brickmunoz3528 same here I just bought the loop did it work for you?

@denisnjossa9648

9 ай бұрын

Please for the link for me to order

Excellent guide, many thanks

U are The Best Bro U Genuis It Worked if it dont work behind in trunk i had use it under the radio wen the fiber cable connects to cd changer

I had the same problem. I checked everything but the problem persisted. Luckily I lived in LA and brought it to the ARG shop. The problem was traced to an aftermarket Bluetooth device that I had installed. He disconnected it and the radio worked perfectly!

I will try this! Thanks

Thank you so much, i have got a problem in the same cars the sound is good when the engine is off but when the engine on the sound is bad

Thanks for the great info. What to do if the unit freezes on radio only and can not change the channels or to other function?

Thanks bro works for first try

I think you mean Fiber Optic, instead of Fiberistic. Thanks for the video!!

cheers ill have to try this

Do you have a link for the fibre optic loop? Is the connection brand specific?

Mine does this and when I turn up the volume all the way up it will cut the right side off from playing music and will only play sound from right side. Static is also a problem with it. Ordered some fiber optic loop from Amazon and will check it out tomorrow after work. If I have to replace any of these modules would the module themselves have to be programmed if I took the module out of a junkyard donor car or is it a direct swap and play???

Thank you

Hi there, Thanks for very clear explanations I have the same issue, I just wondering, do I need just one fiber optic and check on by one or need to kept first on navigation and check another device? Another question is what kind of fiber I need, male or female?

@omarkokobobo

4 жыл бұрын

Keyhan Mousavi yoi can check one by one and if it doesn’t work. Just keep on by passing them.

@TheOrange2341

4 жыл бұрын

Keyhan Mousavi female connector

@elbertbennettiii7545

4 жыл бұрын

@@TheOrange2341 thanks! Was about to ask male/female.

So everything can be bypassed except for the amplifier?

Thanks the trouble shoot, I have S350 amplifier optical lens not working, how can I fix it or can I get used Amplifier

Very useful video!! Thanks! Let me ask you a question…. I’m wondering about change the main unit for a more modern motor one with CarPlay, even having the same problem you showing us, what if a change the unit, this problem will go away?? Thanks

@damonnunnjr8211

Жыл бұрын

I want to know

Hey thanks you good stuff, but your link to Amazon does not work

Hi,can i by pass all moduals and put in a alpine sterio it has everthing i want

My car radio and nav works but the volume stays on low, you could barely hear it, will it work for mine

Hi, as soon as I had the radio problem I noticed my panel door that held the cd changer would not open. How would I trouble shoot that first?

@diablocls55

Жыл бұрын

Same thing is happening with me

@kubaSWAT

Жыл бұрын

@@diablocls55 did u figure it out ?

@kubaSWAT

Жыл бұрын

did u figure it out ?

How would I install a navigation unit similar to what you installed on a mercedes w203 that doesn't have fibre optics? When I installed the navigation unit it comes on but only stays on the mercedes emblem

Hi. Can someone advise how to connect the BE 6094 radio to a Mercedes ML that does not have an optical network. After switching on, the radio will display the logo and then turn off. Well thank you.

Will this work for s430-500

Fiberristic, that's anew one.

So my radio power is up I can see the radio stations but I'm not getting any sound so what unit is bad for mine?

2009 E350, the radio comes on for about a minute then cuts off and back on, any idea what the problem could be

Hi,.. I cant find my navigation module .. any suggestions?

Can that fiber wired fix my issue

Hello can you tell me what fiber optic loop do you have to get for the teleaid because the other ones don’t work for it?

@mubeen854

10 ай бұрын

Did you ever find the correct fiber optic loop for the Teleaid?

@Ladyvirgo007

10 ай бұрын

@@mubeen854 hey no I never did find the correct fiber optic loop for the teleaid.

@mubeen854

10 ай бұрын

@@Ladyvirgo007 gotcha thanks! I might just need a new amp

@Ladyvirgo007

10 ай бұрын

@@mubeen854 your welcome but if I get to the bottom of it I will definitely let you know, but yes that maybe the problem.

@mubeen854

10 ай бұрын

@@Ladyvirgo007 likewise

I still have the original radio on nothing wrong with it till i took the cd changer off i plug the cd changer back but is not gettin power fueses are fine

where is that cable for that bypass to mount at a mercedes ml 320 of 2007 because have the same problem and is identical the same radio. have taken apart all the back upholstery and see so no system

@omarkokobobo

5 жыл бұрын

Deep Digger not sure where it would be but i know that the amplifier is under the driver’s seat.

@deepdigger2129

5 жыл бұрын

Ce que je sais, c'est que la boîte à gants contient le lecteur de CD de musique.

I Have an Ml 350 2006 and facing a similar issue where the logo is struck even when I turn off the car and had to run the car for a while to be able to kick in both, Any help on this?

@jaylitton8542

3 жыл бұрын

Did you ever figure this problem out

any one can tell me how can i connect in mercedez clk 2007, because i can’t find it were to connect. thanks

Hi! Thank you for the video, my radio works in the morning and then stays in ona radio station and can’t change it Can you tell me which are the modules I have to get? At the Mercedes they want to change my radio and I can’t afford it, I have a 2007 r320 Thank you

Hello your tutorial is very important because I have the same problem and I have a Mercedes "E" class is a "W211" year 2002 AVANTGARDE but I do not see the video you probably used phone camera and your explanations your details of the steps you have done so quickly let me see and understand what you did the size of the video is very small or scaled down

@omarkokobobo

5 жыл бұрын

bularye hichem this video is just for tips and to help others. I’m not a video maker nor this channel is professionally made. If making videos was my full time job then yes it would be very precise and made with a better camera and a lot of other factors that would make a great tutorial video.

Hey does this work on a 2008 clk 350 clk same problem

@omarkokobobo

5 жыл бұрын

Santino Louies yes it will, it has the same system as the e class

my cable is broken no socket do you know how to assemble it?

Hello , i’ve Mercedes benz E350 2007 , and the radio is sometimes work then it suddenly off , and sometimes it is stuck in the mercedes logo , please can u help me

Hey there will this solution help on a b klas 2008??

@cezarmunteanu8358

2 жыл бұрын

Did you find a way to do it ? I have the same problem on a B klas

Mine did that ao i put fiber cable on boice module. And got radio back bi to make it not present t cant get rid of sos need star tool 225$$$ to dealer help

My 2006 ml350 doesnt have the navigation there...where the hell is the module?

my car stuck on software update after I tried to active the video . any fix pleas

Hi i have same problem on ml 280 cdi I hope somebody can help

Hey guys, I've had a 2008 Mercedes Benz E350 for 2 years now. The Harmon kardon Logic7 sounded amazing. Until one day my CD changer stopped working while I had CDs inside . I've been reading forums and some people said to remove the fuse for AGW, the CD changer and the radio. I followed the steps took the fuses out, put them back, and at the end the CD changer started working again. But ever since I removed the fuses and put them back into place, my sound has not been the same. I used to get powerful bass from the front speakers, and the subwoofer , and an awesome clear surround sound experience. So much question is do I have to go into engineering mode to get the sound back, or what do I have to do to get the sound? Because I believe that after removing the fuses I must've messed up a component in the radio system that has to be readjusted. I still get sound, but it's not the same as it used to be before I removed the fuses. Sometimes I try, and I put the bass to maximum, and nothing happens. Guys please help me.

@omarkokobobo

5 жыл бұрын

Ghyher jules where do you live ? Any chance by Arizona?

@ghyherjules3973

5 жыл бұрын

@@omarkokobobo Hey, I live in Florida. Does the issue I'm having sound familiar? Because after putting the fuses back I still get sound but there's no bass at all, even if I increase it. I feel like there's a readjustment to be done in engineering mode or something.

@omarkokobobo

5 жыл бұрын

Ghyher jules I thought you were here and i could send you to a really good electrician place. Unfortunately i sold mine i can not help you with anything sorry.

@omarkokobobo

5 жыл бұрын

Ghyher jules try changing the amp from a junk yard and see if it will work, it will be placed on the left side in the trunk. You have to take the left panel out.

@ghyherjules3973

5 жыл бұрын

@@omarkokobobo Thanks for the advice

E350 2007... i press cd changer opener and it doesn't open. Logo only stay on for a few seconds and then shuts off. Tried fiber optic loop. Nothing seems to work.

@premowilson595

3 жыл бұрын

Did you fix ?

@elbertbennettiii7545

3 жыл бұрын

Yes! In the end...All I needed was to subscribe to my satellite radio provider! That simple...lol

@maleikish

3 жыл бұрын

@@elbertbennettiii7545 how did you fix it

@elbertbennettiii7545

3 жыл бұрын

@@maleikish subscribed to Satellite Radio... that simple! Bought it from a dealership and it wasn't already installed. So, if yours never worked from the beginning, try subscribing your vehicle.

I have a 2008 GL 320 Mercedes logo stays on and there is static coming from the speakers any ideas on that problem 😕

@turk1537

Ай бұрын

I have the same problem, you have fix it?

Will my Mercedes still work without a amplifier someone stole mine fight out of my car

Mines stays on the logo nd radio still on

@omarkokobobo

5 жыл бұрын

Warrior-of-Love 43 sorry can’t help you sold the car a year ago

@ivanchristie5955

3 жыл бұрын

.

Hi i have a CLS 350 W219 I check everyhthing and bypass all im bypass the navigation cd player im bypass the telephone module I dont know what to do please help im seeing the audio gateway but the audio gateways fiber optic cable dont has light

@W219TONY

9 күн бұрын

And that before i bypass the navigation cd and the telephone module and works fine but when i replace the battery that was doing the same shows up amg logo and then shuts off please help

HI I GOT A BYPASS LOOP BUT I STILL CANT FIND THE PROBLEM THE CD PLAYER IS NOT OPENING ITS A CLS 07 63

@omarkokobobo

4 жыл бұрын

Not opening or open and shutting off?

@mrtime437

4 жыл бұрын

@@omarkokobobo cd not open radio not working both

Hi, how do I know if the unit that you can bypass its not working? Thanks

@huntlobo9544

5 ай бұрын

Im sorry a ment Can’t bypassing

I currently have a similar issue where the radio reboots every 30-40 seconds.

Details: -the radio does not automatically shut off when the key is pulled -the radio does this when the car is running -non NAVI -I get a three minute warning to insert my key before it shuts off Can you please tell me what is the problem

@Zepak96

4 жыл бұрын

fuses?

Hei , whats the name of this cable ? How can i find and buy it ?

@charlesarmijo6693

2 жыл бұрын

I would like to know the part number for this jumper cable and can I get it on eBay

I have same problem so what I need to do order the loop ?

@Sinister_187

3 жыл бұрын

Yes bro order the fiber optic loop & connect it to the Cd changer Fiber optic plug it worked for me

@premowilson595

3 жыл бұрын

@@Sinister_187 am going to bro

Thats what my radio doin now i took the cd changer out to make a compartment but i guess i messed up the cd changer so now my radio stays on the logo

@medba1317

3 жыл бұрын

Same problem any solution 😕

@Sinister_187

3 жыл бұрын

@Med ba ima ordered the optic loop cable ima plug it if it works ill lyk

@premowilson595

3 жыл бұрын

@@Sinister_187 what happen bro gusse I have to order the cable also

Hello friend, I have a problem with my radio ML350 2009, when i turned it on it displays "missing software" and then it displays "error on update Errorcode: 0x 2312" with the screan in black, and stays like this all the time, please help me!

@omarkokobobo

5 жыл бұрын

Lenin Padilla Warrior-of-Love 43 sorry can’t help you sold the car a year ago

How remove secound module connection???

didnt work with mine, Checked both locations with fiber optic jumper and didnt do anything. Logo still only appears for a few sec then shuts off

@mfgabe5610

2 жыл бұрын

Did you ever figure out your problem? I bypassed all my modules and still nothing. Logo appears than shuts off

@Julian-Vlogs

Жыл бұрын

@@mfgabe5610 same thing here

@mubeen854

10 ай бұрын

Any luck?

The best option you could do is, install double-din stereo with navigation system! Don’t waste your money/time ! With this junky radio !

@omarkokobobo

5 жыл бұрын

Hassan Alkhawaher you could do that but then you have to by pass the amp or other wise the sound won’t be nice as the original stereo also the system for the sound work by the fiber optic wiring you have to by that that whole system.

@omarkokobobo

5 жыл бұрын

Hassan Alkhawaher i’ve sold that car lol, it had a lot problems one after another

I have same problem on my Mercedes I turned on it stuck on logo

Why German car have a lot of electrical issue this including BMW, Audi, Volkswagen, Mercedes Benz.? Japan car seem be much better reliable !

C

I have a similar problem except that the logo stays on even after ive completely turned car off and removed key from starter

@omarkokobobo

5 жыл бұрын

gio vazquez you might want to do a reset

@stickmanbw

5 жыл бұрын

A person told me to remove the positive cable on the battery for 3 min and reconnect. The radio should start.

@premowilson595

3 жыл бұрын

@@stickmanbw did it work

Fiberistic? Lol

God your cars a mess mate

Gl 2007 location of command unit

@lucreziakeen8639

5 жыл бұрын

Zakiya Sapphire Phoen

Thank you

Hi. Can someone advise how to connect the BE 6094 radio to a Mercedes ML that does not have an optical network. After switching on, the radio will display the logo and then turn off. Well thank you.