Great sound & comparison test. Most people test in a different setting which changes the sound. GJ.

@mancavemoto

4 жыл бұрын

thanks

Another great video! Looking forward to your next one... Cheers.

@mancavemoto

6 жыл бұрын

Pablo Salvia thanks

Excellent as usual Tony. Nice video!

@mancavemoto

6 жыл бұрын

Suan Pailom Coffee Roasting Thanks

Brap brap, great tutorial as always! 👍🏻

@mancavemoto

6 жыл бұрын

braap Braap indeed Cotti 🏍

Superb video Tony! You should have a mainstream TV show my friend!!

@mancavemoto

6 жыл бұрын

+dogfish180 haha, I wouldn't go that far but thanks!

@dogfish180

6 жыл бұрын

Seriously mate, I am a mechanic by trade(over 30 years) and I see a lot of videos on bike repairs, etc. that make me cringe. Yours are super intuitive and accurate for the laymen. I also know how much effort it is just to make a short professional video. So big thumbs up for all your efforts here!

Can you get anything similar for a 2010 Bonneville? I think it would sound great paired with my Tec bike parts 2-1 exhaust!

Nice vid. Keep them coming

@mancavemoto

6 жыл бұрын

Ezequiel thanks!

Hi and Thanks for your guide! I installed by myself this fantastic gear on my Street Scrambler and I noticed great sound, lower shield temperature and more hp. The only negative aspect is a little loss of torque at low RPM, but maybe it's only a wrong impression. What do you think about It?

@mancavemoto

3 жыл бұрын

Its mainly noise and heat that changes, maybe a slight change in throttle response? Anything else I think is a placebo effect

I got it and it makes the scrambler a better bike. The sound is much better and it accelerates much faster.

@lavendel18

6 жыл бұрын

Is there someone who has the for pipes wrapped with heat shielding, it covers the weld. I think it looks great.

@PercyJackson93

Жыл бұрын

Did it cause it to be a lot louder or was it not really noticeable?

Great video 👍

@mancavemoto

4 жыл бұрын

Cheers Richard

nice review. good sound and a worthwhile mod.. I do like the look of the SS. Did you swap the Street Twin?

@mancavemoto

6 жыл бұрын

hollowaysteve thanks Steve, nope I just had the SS on loan for a couple of days

Hi. Did you measure the exhaust pipe temperature before and after the new decat pipelines installation?

@mancavemoto

4 жыл бұрын

Not in a technical way no, I did a 30 minute ride with the stock pipe and tested the heat from the centre shield by hand. The next day when the H pipe was fitted I did the same. It was noticably different, although I appreciate no at all scientific.

Tony, I noticed the exhaust pipes in your bikes are spotless. Mine, however, have developed several stains right on the curvature as they comes off the engine. Do you do anything to your exhaust pipes to prevent this. Or do you clean them with some product you can recommend?

@mancavemoto

6 жыл бұрын

Hi Ezequiel, nothing special to be honest. But after cleaning the bike I always give them a squirt and rub down with WD40. Seems to work. Mine has stains also, maybe they just don't show up on the videos

@petergoddard1960

6 жыл бұрын

Check out Delboys Garage, they have a video on bringing back the finish on stainless exhausts. Your answer is Autosol. Del shows you how, just look in the Bonneville playlist. Remember Autosol is a polish so therefore is a mild abrasive, so don't use it on chrome! Hope this helps.

I pick up a new scrambler next week and I've been dooing my research and watching all your great videos, do you know if there is also a way to remove the baffles from the original pipe on the scrambler ?

@mancavemoto

5 жыл бұрын

It can be done, but it involves some major surgery. Tbh it’s probably easier just to switch them out, unless you have the skills (which I don’t)

@ianatkinson2628

5 жыл бұрын

@@mancavemoto thanks for the reply, don't think I'll risk butchering the new bike, might just have to do a de-cat 😃

Hey Tony, is the temperature of the black shield on top of the cat converter lower now?

@mancavemoto

6 жыл бұрын

Hi Ezequiel, yep it was certainly cooler than before, that was one thing I wanted to check. The cat does seem to retain a lot of heat

I'm thinking about getting an h-pipe or british customs slip-ons. I want a better sound and some performance upgrade. Which would you recommend?

@mancavemoto

4 жыл бұрын

Both!

Hi Tony, great video mate. I installed one effortlessly on my street scrambler using your video. Very helpful indeed. Thank you. One question: the H-pipe seems to get very very hot on that u bend. I've read that it reduces heat as the cat produces a lot, but it seems hotter now. Is this your experience?

@mancavemoto

6 жыл бұрын

Thanks John, I can’t say I noticed it getting any hotter than the stock pipe

its already for sale, how must it cost

Do you know if this will work with the V n H pipe for the Scrambler? Thanks

@mancavemoto

6 жыл бұрын

Hi Josh, the. Vance & Hines pipe doesn’t have a catalytic converter, it’s a straight through header. So this wouldn’t be required

How did the pipe look after being aged on the bike. Did it blue like the stock pipe or turn black? (BTW I have that same helmet for my Harley LRS. Lots of comments on it)

@mancavemoto

2 жыл бұрын

I fitted this to a demo bike froma dealer, so i didn't get to see it age, the bike went back to them a couple of days later...

Nice sound

@mancavemoto

6 жыл бұрын

Isn't it!

Great video!! Is it the sound less deeper? Or is It the same tone but louder?

@mancavemoto

19 күн бұрын

Deeper, and a little louder

Does anyone know how this compares to the British Customs competition headers? I'm trying to figure out the difference but noboday leaves reviews these days....

@mancavemoto

5 жыл бұрын

It looks very similar, I would say almost do difference in design, It'll just come down to the build quality. I cant speak for the BC unit, but Freespirits is top notch..

Hi what affect does it have on the spart plugs reading, colour does it make the bike run leaner which could damage the engine. thanks andy

@mancavemoto

5 жыл бұрын

Hi Andy, I only had the bike on loan for a couple of days, so didn't have a chance to check it. It ran fine, even felt like a better throttle response, but that could have just been a placebo? I've run my Street Twin without the cat for several thousand miles and it's been great, no ill effects. Unless you start messing around with the intake side the ECU should have enough tolerance to deal with the minimal change in back pressure, and fuel accordingly.

@nortonbsa9961

5 жыл бұрын

@@mancavemoto cheers mate

Hey Hi, I just bought & added my street scrambler 2018 with 2-1 slip-on from Vance and Hines designed for street scrambler hoping that it would sound better, started bike and it sounds exactly same as stock exhaust even less richer, what a waste of money ( though bought from eBay half the priced ), due to lack of knowledge about CAT being the culprit here I ended up spending on Vance exhaust, Is there anything I can do , as not sure if I can afford to spend more on free spirit to remove cat, or is it the only solution? Basically bike just sounds great with free spirit and didn’t had any need for Vance exhaust separately, Would appreciate your thoughts on it, I live in Uk, London Cheers

@mancavemoto

Жыл бұрын

Is this the high level exhaust? If so then that exhaust doesnt have a cat (if its the same as this) kzread.info/dash/bejne/d3ma0ZJud9idj9o.html Have you removed the baffle?

Can the same wheels Of the scramble be use in the street twin ?. Meaning if they fit

@mancavemoto

5 жыл бұрын

The front wheel of the Street Scrambler is a 19 inch, which would create some issues, but in theory It could be done. But if you are going down that route, you may as well just buy the Triumph accessory wheels

Standard bike sounds good but the H-pipe sounds better, has a nice "brap" to it. Does the mapping require any work or is it a straight swop job.??

@mancavemoto

6 жыл бұрын

There is enough tolerance in the ECU to run the h-pipe with no issues

Will the Scrambler exhaust fit a 2016 T120 ?Cheers

@mancavemoto

6 жыл бұрын

Good question, I don't see why not, but I couldn't say for sure. sorry

Can you reuse the header gaskets or do you need new ones? Are they included in the kit?

@mancavemoto

6 жыл бұрын

No need for new gaskets

@SvenTord

6 жыл бұрын

Views from the Man Cave Thanks for the reply. I have one on order. I might wrap mine for looks. Not sure yet.

Good vid, did you notice much difference to the heat levels?

@mancavemoto

Жыл бұрын

Losing the cat definitely reduced the heat output, not that it’s bad anyway

Hi! I have a Vince & Hanes terminal, should I remap if I install the Free spirits pipes? Many thanks in advance.

@mancavemoto

4 жыл бұрын

you don’t NEED to remap, but i found the triumph ‘offroad’ map made an improvement

@lucadurr6329

4 жыл бұрын

Many thanks!;)

Is the ECU happy after installing H-pipe? Throttle response better??

@mancavemoto

2 жыл бұрын

Yes no problem with the ECU and it seemed to makes things just a little snappier

So the Street Scrambler has 2 Cats? One at the bottom and one shown in this video? So you have put a Motone X pipe and a H pipe here? Have I got that right ?

@mancavemoto

6 ай бұрын

There isn’t a pipe at the bottom. The h pipe is the same as an x pipe, but it’s for the street scrambler

A year later I went with the British Customs De-Cat Pipes and wrapped them. (they have a nice Stainless finish but wrapping was in my plan) The stock cans are strait through. They give the ability to look stock (they are), but if you open the throttle moderately or harder, they are strait through pipes. So if I'm sitting at a light and a squad car stops next to me, I can take off easy and it sounds stock. I added the boost plug but a CPU re-program is on the back burner. I like the look of the stock cans too and I'm never going to be as loud as the Harley's around here (N. Nevada) so why even try? The extra kick from De-Cat and the boost plug is palpable. Great idle and no snatchy throttle and...Yowza. I also added the Progressive front fork springs and THAT was a very welcome difference also. Very easy to DYI also. Mine is a '22 and a good bit of re-molding to fit me, I'm 5'7" and for appearance. I plan to make a short video soon but as long as I have it, it will always be work in progress. I've watched many of your videos and consider you a top source for Triumph "how to's". many thanks and appreciation for what you do.

@mancavemoto

Жыл бұрын

Thanks Mate, your bike sounds great!

Would this modification change the emissions for mot testing?

@mancavemoto

3 жыл бұрын

There is still no emissions test in a motorcycle MOT in the UK. but I guess it would make some difference yes.

Lawd That weld was it done with a soldering iron.

Hi What Torque Wrench would you recommend?

@mancavemoto

3 жыл бұрын

I use a Norbar TTi100 Torque wrench which has been excellent and is very easy to set. Its not made any more but there are alternatives www.norbar.com

Is this a 2019 SS? I have a 2019 model but unsure if I have the right cat box number to do the swap. Does anyone know ?

@mancavemoto

2 жыл бұрын

Its a 2018 MY bike, not sure if any different to the 2019?

to dismantel all you need inch spanner ? or normal spanner ?

@mancavemoto

4 жыл бұрын

Just normal spanners yes

Does it give you any more power? Is it just for sound? And weight saving.

@mancavemoto

3 ай бұрын

With the less restricted airflow you’ll see maybe 2-3hp more? So more about sound and weight.

Tony, should the bike be remapped when pipe is fitted?

@mancavemoto

6 жыл бұрын

+Robert Newitt Hi Robert, this bike wasn’t remapped and it ran just fine. If the silencer was being replaced as well then perhaps a remap would be more beneficial.

@robertnewitt6785

6 жыл бұрын

Views from the Man Cave Thanks Tony. When removing the O2 sensor do you have to disconnect it from the loom, or does the nut collar rotate freely to allow removal? Cheers Rob

@mancavemoto

6 жыл бұрын

+Robert Newitt no need to disconnect the nut collar rotated independently. Just tuck it out of the way until you’re ready

@robertnewitt6785

6 жыл бұрын

Cheers Tony I’ve been waiting for the TEC one to be released which won’t have the weld As it uses bespoke Bends. Not that the weld bothers me too much, it’s a bit cheaper! 😄

Would the H pipe work with the Vance and Hines pipe fitted to the bike

@mancavemoto

6 жыл бұрын

Hi Speedtriple T509, yep it certainly would

@speedtriplet5093

6 жыл бұрын

Thanks for that information man cave

do you have an idea of the DB level after the installation ?

@mancavemoto

6 жыл бұрын

Hi Alexandre, sadly I didn’t have the ability to measure the sound. It wasn’t much louder than stock, in fact very similar on tick over. But it gave a nice ‘bark’ when you ripped the throttle

@alexandremorneau4699

6 жыл бұрын

thank you for your reply mister ! I just wanted to be sure before buying, do not want to be harrassed by the police. Keep up your good work, i really enjoy all of your videos !

What can you say about fuel consumption? Does it increase much?

@mancavemoto

10 ай бұрын

I didnt notice any change

Did you need to use a new seal or you don’t need too?

@mancavemoto

8 ай бұрын

No the old one was fine

Where do I get this? Please answer me

@mancavemoto

6 жыл бұрын

There should be a list of stockists on the Freespirits website. Where are you based?

What do you think fam, is it better the British custom or this one. Or both are the same

@mancavemoto

4 жыл бұрын

The build quality of the Freespirits pipe is top notch, I haven't seen the BC one up close. One thing I will point out is that the Freespirits one has a link pipe (as does the stock) the BC one does not which is why I would choose Freespirits.....

@Chicharrero91

4 жыл бұрын

Views from the Man Cave thanks a lot!

@Chicharrero91

4 жыл бұрын

Views from the Man Cave I installed the free spirits one on my street scrambler 2018 and I’m so happy about it. You really can notice the change in sound and the bike feels smoother.

I ordered the decat, it comes with 2 o rings in cooper.. 🤔🤔 you don't talk about it? Should I install it?

@mancavemoto

5 жыл бұрын

Natty Dread yes always replace the gasket when you change the header. Did I not mention them? 🤔🙄

@NattyDreaddy

5 жыл бұрын

@@mancavemoto maybe my english is not good enough, sorry... but where shold I put them? I don t find nothing in the manual...

@NattyDreaddy

5 жыл бұрын

@@mancavemoto you said replace.. so I should remove the old right? 🤔 sorry maybe stupid question, but I wanna be sure

@mancavemoto

5 жыл бұрын

Natty Dread yes remove the old ones

do you have to remap ECU?

@mancavemoto

6 жыл бұрын

Hi +Denis, no need to remap

Me personally that centre weld just ughh. It looks rough The gp exhaust welds are nice and if it looked like that id be liking it more. Aside from that sounds great and good spannering and description.

@mancavemoto

6 жыл бұрын

Thanks David, I agree it would look better without the weld, but it doesn't bother me particularly. It certainly makes a great sound!

@thisisme7587

6 жыл бұрын

Views from the Man Cave did you get to ride it before? I havent heard anyone with one yet straight out say the bike performs better but every one ays it sounds better. Im wondering if the lower torque range makes it harder to tell a marked difference. Ive got a SS waiting to be tampered with haha

@mancavemoto

6 жыл бұрын

David Forbes, I did and it certainly seems to add some zip. The bike feels a little more alive and responsive. The loss of the cat should equate to 4 or 5 hp more (although I haven't seen the dunk charts). I took it down to Jack Lilley to show the guys and they also thought it made an improvement.

@thisisme7587

6 жыл бұрын

Views from the Man Cave thanks tony. Keep the vjds coming 👍

@Boy.of.wonder

6 жыл бұрын

David Forbes centre weld just completely rules it out for me too which is a pity as it does sound cracking. Yet another top video Tony, thanks man 👍🏻👍🏻

Does this pipe give you more? HP? Is it just for Saving weight and sound.

@mancavemoto

3 ай бұрын

In reality you'll see 2 maybe 3hp difference, so its more about weight saving and noise. The throttle response did appear to sharpen a little, but that may have been a placebo effect?

@777Ruffdriver

3 ай бұрын

appreciate your feedback many thanks for an honest reply.

Why can’t I find this for my 2014 t100...damn.

Sweeet!

Hello I am from Brasil and how can i bay tais part Thanks

@mancavemoto

Жыл бұрын

If you look on the Freespirits website, they should have a list of distributors near you

ECU adjustments needed?

@mancavemoto

9 ай бұрын

No

Hello Tony, great tutorial!!! I have one small issue and I need your help. I've brought a street scrambler a week ago, and I've been trying to order the H-pipe but no chance. Tried different dealers but couldn't order it. Do you know which one from Free Spirits list have the de-cat ? Thanks in advance

@mancavemoto

4 жыл бұрын

You could try Jack Lilley Triumph, now Triumph East London, they do stock some Free Spirits parts

@dacicwolf2596

4 жыл бұрын

Thank you very much, I will call them Monday!!!

It works with Vance also?

@mancavemoto

6 жыл бұрын

yes

@NattyDreaddy

6 жыл бұрын

Ordered

@wadetkachuk447

6 жыл бұрын

did it need a programmer or no?

@mancavemoto

6 жыл бұрын

Wade Tkachuk No it ran fine with no remap

Sounded better stock. No brap needed or wanted.

@mancavemoto

2 жыл бұрын

Horses for courses and all that. Thanks for watching

A one eyed pakastani brick layer welded that Lawd. Good vid. 😂

@mancavemoto

4 жыл бұрын

Not keen on the casual racism, but glad you thought it was a good video

I like stock pipe sound :/

@mancavemoto

5 жыл бұрын

The stock sounds great too

That's a hideous weld on the curve. I could never live with that.

@beetleything1864

4 жыл бұрын

you have to ask why as well !!

Why would you decat the bike? Do you know how much worse the exhaust gases are for your lungs without a cat? And also for the environment?

Weld on down pipe is ugly the other pipe is bent without any ugly welding on sight. The cat was there for a reason now the fumes are socialy unacceptable?

@mancavemoto

3 жыл бұрын

I'm not making a judgement call on its environmental impact, I'm just showing the install and letting people make their own decisions

What an egoist accessory..