Looks like an amazing tool Dennis! Nice flex once again! Thanks for sharing!

@TyrellKnifeworks

4 ай бұрын

It's a really versatile laser that is a great fit for knife makers. Thanks for watching, Stephen

I’m glad you get the chance to review this stuff. I was going back and forth between the X1, LP4, and an actual fiber laser. The F1 was my first choice based on the other reviews I’ve watched and its overall flexibility. Just needed to know how well it works for knife makers. Thanks Denis!

@TyrellKnifeworks

4 ай бұрын

You won't be disappointed! I'm selling my LP3 now after getting the F1. Thanks for watching, Jason!

@brianhershberger4834

4 ай бұрын

Stay away from Laser Pecker. No customer service!!!

I was going to get the lp3 but now xtool it is thanks for the review

@TyrellKnifeworks

4 ай бұрын

I think you'll definitely be happier with the xTool F1, I am. Thanks for watching!

Great tutorial thank you

@TyrellKnifeworks

4 ай бұрын

Glad it was helpful! Thanks for watching, Greg!

Thx for the vid! I may buy one for myself.

@TyrellKnifeworks

4 ай бұрын

You won't be dissappointed, Jonathan! I'm really impressed with it. Enough that I'm selling my LaserPecker3. Thanks for watching.

@Lil-Bear82

4 ай бұрын

I watch all your videos-keep up the gr8 work, love it! Gr8 content delivered well thx.@@TyrellKnifeworks

Great video man, this one definitely has a lot more features but the Bluetooth is probably a deal breaker for me. Don’t have a laptop I can have in the shop. Appreciate the info as always!

@TyrellKnifeworks

4 ай бұрын

I wouldn’t advise putting any laser in your shop unless you have a clean room and separate room for grinding. I keep mine in the office. Thanks for watching.

Im getting ready to get a Lazer but the last lazer you reviewed looked alot simpler to use. I need something very simple and I don't have Internet at my shop. Thanks for the video

@TyrellKnifeworks

4 ай бұрын

I would strongly recommend this one over the LaserPecker. The software for this one doesn’t require internet if you have a computer to hook to it and it’s faster with better options. This one is also cheaper. If you are thinking about attachments, they are much more versatile with the xTool F1. Either will certainly do the job though. Thanks for watching, Richard.

@richardbranton190

4 ай бұрын

@@TyrellKnifeworks I was about to go to the abs school next month but it's $1600 and I'll have to miss 2weeks of work. All together it will cost me about $6000. I'm going to take that money and get tools instead

@TyrellKnifeworks

4 ай бұрын

@@richardbranton190 While I'm a big fan of learning, that's a lot of money... which would make some amazing tool purchases. 😉

@TyrellKnifeworks- When you did 4 passes on the steel as a knife mark, were you in IR mode?

@TyrellKnifeworks

2 ай бұрын

Yes, you definitely want IR mode when you're engraving steel. The blue laser is only for leather/wood, etc. Thanks for watching, Ron.

Hello! I want to engrave silver jewelry but I don't want the engraving to be too dark. Can you put a clear engraving? fine? thank you so much

@TyrellKnifeworks

2 ай бұрын

You can probably engrave it with the laser and then buff it and it will take out the darkness. Thanks for watching.

Can you do a video on blackening your hardware. The hot salt dip?

@TyrellKnifeworks

4 ай бұрын

I've done that video before... it's here: kzread.info/dash/bejne/kaphj9SbnLfbYdo.htmlsi=4I1bxp6KRfVJqxB-. Thanks for watching.

Just shared this video to the wife. You explain stuff much better. 😂

Like your take on f1 .

@TyrellKnifeworks

4 ай бұрын

It’s a great machine! I’ve sold my LP now and I’m staying with the F1. Thanks for watching.

Well, I bit the bullet and bought one Denis! Thanks for the review. Now that you have been using it for a while what settings do you use for doing your maker's mark in high carbon steel? Has anything changed since this video? All Max settings and 4 passes?

@TyrellKnifeworks

Ай бұрын

Still love this machine! I still use max settings at about 500 dpi with 4 passes for my makers mark. You won’t regret it!

@MBishopsBlades

Ай бұрын

@@TyrellKnifeworks Thank you! Can't wait to try it out.

@MBishopsBlades

11 күн бұрын

@@TyrellKnifeworks Denis, what dot duration do you use for the makers mark?

@TyrellKnifeworks

11 күн бұрын

@@MBishopsBladesI don’t remember the number but it’s set at the max. I use the max settings for the first two then at 720dpi and 5 passes.

@MBishopsBlades

11 күн бұрын

@@TyrellKnifeworks ​​⁠Thank you so much! I have been doing some testing and it is very promising!

wish i could afford one of those XTOOL F1. Thats my dream. its a very unique machine.

@TyrellKnifeworks

4 ай бұрын

It really is a great machine. Thanks for taking a look.

@epicetches4155

4 ай бұрын

Get to your local maker space. Start there until you can afford the tools you need for your craft

DPI: assuming dots per inch? The very low settings, say... 1-200, these would be for artists, shading, like a dot matrix realistic picture.

@TyrellKnifeworks

4 ай бұрын

It’s not quite like that. It’s not dithering the pixels but blocking them out. If you did something like 20 dpi you get a pixelated image. Not the dot-matrix effect. Thanks for watching.

As with all the technology I've watched, home lasers are getting better and better. In a few years you'll be able to buy one that will cut out your blanks for you and then take Mollie for a walk!

@TyrellKnifeworks

4 ай бұрын

That's so true! We'll be doing our own laser cutting soon. That will be great! Thanks for watching, Bryson.

Updating creative space on xtool d1 10 watt

@TyrellKnifeworks

4 ай бұрын

I'm not sure what your comment meant, but I used to have the D1 but this one is MUCH better. Thanks for watching, Michele.

I just bought the lp4 because of your last video and now I see this 🤦‍♂️

@TyrellKnifeworks

4 ай бұрын

They are very comparable. Nothing wrong with the LP4, it has the same stats as this one. The XTool does have better accessories though. Thanks for watching.

@vandengaaskjolen1821

4 ай бұрын

@@TyrellKnifeworks at least I got a deal with your discount code. I appreciate all your videos for a beginner knife maker.

Selling me lasers again. 😂❤

@TyrellKnifeworks

4 ай бұрын

Ha, you’re welcome. If you’re on a budget, I’m selling my LP3. Message me. 😉

@mcrich1978

4 ай бұрын

@@TyrellKnifeworks if it's not sold after Blade Texas we can perhaps work something out 😊

Got a LP3 after watching your review, worked for almost 10 knives... less than 30 days and it quit. Customer service is non-existent. Finally after several weeks they are sending another head.... would not buy again.

@TyrellKnifeworks

4 ай бұрын

I haven't used my LP3 to that extent. I do prefer the xTool f1 though. Sorry about your troubles. I have heard others are having success with the LP3 with no problems at least. Hopefully yours is an isolated instance. Thanks for watching.

I'm using the exact same adapter with my mac and have no issue at all using usb A to C

@TyrellKnifeworks

4 ай бұрын

Maybe it depends on the Mac OS version or something. It wouldn't work for me. Thanks for watching.

hi

@TyrellKnifeworks

4 ай бұрын

Thanks for watching.

safety glasses are goofy as long as you have two eyes :) please use additional eye protection

@TyrellKnifeworks

4 ай бұрын

The green shield already protects your eyes. Additional glasses aren't needed. Thanks for watching.

@floridalove1

4 ай бұрын

@@TyrellKnifeworks That's not quite right. As long as you have the laser room completely closed, this is correct. However, if you use the Slide extension or the Rotary and your protective cover is open as a result, safety goggles are ALWAYS required!

@TyrellKnifeworks

4 ай бұрын

@@floridalove1 look safety sally, the shied still comes down enough to shield what you are engraving. Thx

Alot of money for somthing like that.

@TyrellKnifeworks

4 ай бұрын

$1450 for a laser that marks steel is a very good price. Thanks for watching.