TRAXXAS WHEELIE BAR (
In this video I install the Traxxas Upgraded Wheelie Bar (Part #3678) on my Traxxas Stampede 2wd….I also install the Traxxas Battery Expansion Kit (Part #3725X) so I can run a taller 3s Lipo Battery Pack
Traxxas Stampede 2wd Hardened Steel Driveshafts -
www.ebay.com/itm/283426826629...
1/10 2wd Traxxas Hub Bearing Kit - 10 pcs for Slash 2wd, Rustler 2wd, Stampede 2wd -
www.ebay.com/itm/153952629409...
Amazon Affiliate Links -
Traxxas Wheelie Bar (#3678) for Traxxas Stampede 2wd, Slash 2wd, Rustler 2wd and Bandit 2wd -
amzn.to/3U9hER2
Traxxas Battery Expansion Kit (#3725X) for Stampede 2wd, Rustler 2wd and Bandit 2wd -
amzn.to/3GTwE2l
RPM Rear Hub Carriers for Traxxas Slash 2wd, Stampede 2wd, Rustler 2wd, Bandit 2wd (Black) -
amzn.to/3Ev8pVq
Traxxas Blue Anodized Front Steering Blocks (3636A) for Stampede 2wd, Slash 2wd, Rustler 2wd and Bandit 2wd -
amzn.to/3Ex8DLL
Onyx 1/10 Scale 4 Pole Brushless Motor (4000kv) with 70 amp Esc with Ec3 Connector -
amzn.to/3gbponc
Hot Racing Medium Duty Servo Saver (Blue) -
amzn.to/3T4K2ny
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
amzn.to/3AfJzYG
Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
amzn.to/3dkYgkd
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) -
amzn.to/3bT6nnN
Amain Hobbies Links -
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (PINK) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (ORANGE) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd Xl5 (ORANGE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (PURPLE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Пікірлер: 38
Funny story, not sure if you remember, but my slipper clutch was tightened all the way and 10 minutes into driving it sheared off the roll pin on the input shaft ! Lol. Great video! Love the stampede!
You will want to zip tie that wheelie bar in the desired position they like to pop out of place all the time
cool upgrade and install
The old hold down was on my 1994 stampede. The receiver would sit in front for it. Doesn’t work for lipos.
Great video 👍That part might just be for the brushless Vxl stampede
Wheelie bar is cool. How about adding a few grams of weight to the front? Amazon sells small metal weights in very small increments such as a single gram. Placed in the bumper or front of the chassis will keep it planted. It did in a very old nitro slash I used to have.
Cool video, That wheelie bar the wheelie bar part is also used on the Stampede 4x4 just a different bumper mount and can also be used on the Slash 2wd. I agree with you on Philips head screws my dad has a Tamiya TT-02 and it has all Philips head screws on it and it's tricky to get them out without the risk of stripping them. I like hex heads way better but they can still strip if you're not careful i have stripped a few but i was using lower quality drivers.
Next time dab a little super glue on the spacers on the backside of the plate. Less fiddling around. 😉
That foam piece is for the black stampede chassis and it goes in the little boxed in portion of the chassis on the very back under the platform and ull probably need that hold down cause ur chassis is shorter than the black chassis
Nice
any problems with that servo? also try moving your receiver to the front or add about 1 pound to the front and it will help alot i think.
It is all u need to raise the platform but it raises it too much with the spacers that come with it but if you go to ace hardware and get some aluminum spacers that are not as tall and a 3s pack will still fit under the platform cause it's too high for my taste with those spacers in the kit it looks stupid with the spacers in the kit and I had to drill different holes in the battery hold down posts to make the battery hold down fit tight against the battery and where it wouldn't slide out of the truck all together but I bought the kit too and just modified it with parts from ace hardware
Cool vid 👍🏻✌🏻
I run mine without a wheely bar, it's called throttle control. A
Just buy you a bag of different mm hex screws and replace the Phillips head screws?
Do you think you could do a 4s upgrade?