Put the gear in the freezer for about 2 hours, and before you install the bearings, warm the bearing up in your hands for a few minutes. They should slide right on.

Dang, thats a nice servo.

@rcfungames

Ай бұрын

I'm definitely pretty impressed with them so far 💯💯💯

❤ You did a great job on this video buddy keep up the great work

@rcfungames

Жыл бұрын

Thank you so much brother ❤️ Really appreciated it 🤜💥🤛 It's really nice when somebody appreciates all the hard work a person goes through to make these videos. 🎥👍👍👍👍👍👍

Had the same problem. And i didn't have patience like you. Ended up breaking one bearing. And they were injora bearings as well. Great video, keep them coming. 👍

@rcfungames

Жыл бұрын

Hi 👋 Thank you very much for the feedback, it's good to know you had the same problem. I will be speaking to Jeff from Injora pointing out the issue that we had. To see if they can rectify it. Thank you so much for your constructive comment, it's what makes me continue making these videos so thank you very much. 🤜💥🤛

Very interesting and informative video my friend! Have a nice weekend! 😀👌💥

@rcfungames

Жыл бұрын

Thanks bro, I am trying to make interesting content, that can be helpful to new people coming to the hobby. So thank you very much for the feedback really appreciate 🤜💥🤛

❤❤🤘😎🤘 great video my friend!!

@rcfungames

Жыл бұрын

Thank you so much ❤️ It's a lot of work to be able to film everything in detail when working on the cars. So thank you so much for your comment and view 🤜💥🤛

Great job mate🏆

@rcfungames

Жыл бұрын

Really appreciate it 👍 Thank you 🤜💥🤛

Strong servo. The quality was pretty amazing. Except for that bearing and gear issue 😸👍🏾👍🏾

@rcfungames

Жыл бұрын

Hi buddy 👋 Injora Upgrades are definitely not bad quality, just disappointed with the pinion, but you know what it adds to the fun of the Build😜 Thanks so much for the view and comment 👍

Hello, Another great job from you!👍a very informative video!👍 Greetings Seven🖖

@rcfungames

Жыл бұрын

Hi Seven 👋 Thank you very much, I appreciate the feedback 😊👍👍👍 Greetings Ryan 🖖

@SevenWelt

Жыл бұрын

@@rcfungames 😀

Great video, very informative. Thanks 👍

@rcfungames

Жыл бұрын

Thanks so much 👍👍👍

@robertresmer2835

Жыл бұрын

I had the same thing with one of my pinions and one was good. I have the same servo and it works good.

@rcfungames

Жыл бұрын

@@robertresmer2835 it was such a minor in perfection that it doesn't bother me and it adds to the fun of the Build✌️🤪 And yes the servo is amazing 💯 Thank you for the view and comment 👍👍👍

@robertresmer2835

Жыл бұрын

Yes it just makes it more fun. But I do need to replace the plastic axle housing. And I put an antenna on the Bronco. Not sure if I like it.

Just put the pinions in the freezer for an hour and the bearings in a warm place. I bet you the bearings would slide right on then.

@rcfungames

Жыл бұрын

I've used that technique many times when working on cars Didn't really want to go that way as I wanted to be able to remove the bearings whenever I wanted to. Thank you for the view and comment 👍

Naice build, great up-grades my Friend! Almost no more Traxxas

@rcfungames

Жыл бұрын

Thanks bro 👍👍👍 It's now so smooth and crawls so slow it was worth it. Testing video coming soon 🎥🏞️

@pandacrawler6x6

Жыл бұрын

@@rcfungames I belive.

Build a rc car with really good parts. This must be a very special RC car.

@rcfungames

Жыл бұрын

Thanks my friend, it's really turning into something special 👍👍👍

@G9RCCar

Жыл бұрын

@@rcfungames you're welcome my friend

Good job!

@rcfungames

Жыл бұрын

Thank you dude 🤜🤛

@skorpionman67

Жыл бұрын

@@rcfungames 👍

Thank you

@rcfungames

5 ай бұрын

It's a pleasure, thank you for watching and commenting 🤜💥🤛

Did you find a need to shim the pinion on the helical differential gears? I have quite a bit of slop at the rear driveshaft/diff interface

@rcfungames

5 ай бұрын

No, both of mine were actually perfectly snug! I didn't have to shim them.

@cpetsche

5 ай бұрын

@@rcfungames perhaps that washer you put in at the transmission end helped push the driveshaft rearward?

Hmmm. So I recieved every upgrade your doing here, for my own self > and I have not had to sand smooth a single bearing location on a shaft yet. Perhaps they have listened to you? I can only think they have. In your one closeup you have splines on your heli gears > I do not and they fit perfet. Its bittersweet that I had to watch you grind, but not had to do so myself.😔 I have faith in Injora; anyone that includes extra grub screws and wheel bolts and axle pins and many extra SS hex bolts must really care about this hobby.

For the center drives haft does it comes with the bearings ?

@rcfungames

11 ай бұрын

Hello 👋 No, I had already installed the bearings before doing all this work. Just grab a bearing kit and every time you open or work on something take out the bushings and replace it with the bearings.

Hey! I've just picked up the Alu axle housings with the laydown servo mount. I'm hoping that the front axle will be compatible with the "non universal" Injora LCG carbon chassis with the 5 deg angle. Any reason to think it won't work? I run the Injora 11kg servo...

@rcfungames

5 ай бұрын

Hey bro, I have seen quite a few people say it works with that chassis. I haven't tried it yet, so I can't say to you that it does or it doesn't. I've got a set of those axles and I will fit them to the Bronco or the defender to see if it works with the non-universal lcg carbon fiber chassis. But I'm still waiting on the axle shafts that I took out to use on the diamond axles. Hopefully they will be here soon. I'm sorry I can't tell you yes or no but I have heard people say like I mentioned that it works. The only difference between the new Universal chassis and the old lcg chassis, is that they've made the rails sit a couple of millimeters further apart and then use adapters for the bumpers to fit. Which gives you more space for the lay down Servo setup. And from what I have observed on my latest build with the lay down service setup and the universal chassis is that there's just enough space for the setup. So in my opinion I do believe it's going to be a tight fit on the old LCG chassis. Hope that helps bro

@cpetsche

5 ай бұрын

Well I guess I"ll let you know when mine shows up!@@rcfungames

@rcfungames

5 ай бұрын

@@cpetsche thank you, I would appreciate that information 😉

@cpetsche

4 ай бұрын

@@rcfungames alas, I decided to use the “old” LCG chassis to build up my IR40. But having built up my defender with a very similar carbon chassis, I expect they’ll work fine with the older Injora LCG.

Do you lubricate the CVs in knuckle housing?

@rcfungames

Ай бұрын

Bro the only reason I don't recommend that is because when running in dust and sand it will just collect on the CV joint causing more damage than good. If you run a lot on rocks and water then yes you could put a bit of grease in there. But where I live everything is dry and Dusty and would just get in and the sand would just grind away the metal.

I got some new rims and tires from injora . And it’s taken for ever to get here. They need a supply warehouse in the US..

@rcfungames

Жыл бұрын

That's really cool, it also takes at least three weeks to get them here in Portugal.

@429supercj

Жыл бұрын

I got mine in 9 days in the middle of the USA

Does this skid plate catch on things bad?

@rcfungames

Жыл бұрын

It doesn't help as the axles already very low, but I drive on really Rocky and rough terrain, so just to protect the aluminum Axel's I thought it was worth it. But it's basically got the same clearance it had with the original tires. And in my opinion that haven't been too bad they were designed quite well, and I just gave them a slight bend upwards to prevent them catching as much.

@chrish9502

Жыл бұрын

@@rcfungames thanks! I see injora offers a version that covers the axle housing some as well. Do you find the area on your axles on either side of the pumpkin hitting things frequently?

@rcfungames

Жыл бұрын

@@chrish9502 you know what I saw those and I was going to get them, but from the reviews people don't seem to like them very much and no I haven't had not a scratch yet on that part of the axle. So personally I don't think it's worth it

@chrish9502

Жыл бұрын

@@rcfungames thank you so much for all the help. I think I’ll order the meus ones then to protect my treal portals

Sie müssen auf die Gelenk Wellen Ausrichtung achten !

@rcfungames

4 ай бұрын

Indeed you are right you have to make sure the drive shafts are in phase and axle shafts are also in phase! This was before they actually made them in phase and was difficult to get them aligned. But since then Injora has done a great job making sure the whole drivetrain if assembled properly is in phase. Thank you so much for watching and commenting.

Good stuff but your drive-line is out of phase.

@rcfungames

Жыл бұрын

No it's not, I set it up like that so that way I reduce the angles on my drive-line. It runs so smooth and doesn't catch on the drivelines like it did originally. Thank you for the view and comment

@rcfungames

Жыл бұрын

And you do realize this is not a real car, it goes roughly 2 kilometers an hour So you're not really going to get any vibrations from the drive-lines not being phased 🤣 If it was at fast RC car I could understand it being a problem Anyway just too point it out you do realize that's all the wheels are off balance, amongst many more running parts so it could never be a vibration free. Lol 🤣🤣🤣 But on this tiny crawler at the speed it runs you are never going to notice it 🤣🤣🤣

Your Driveshafts are out-of-phase.

@grandmasteraj855

Жыл бұрын

I had the same problem. Got a replacement set of driveshafts on the way. It was making my front wheels lurch every rotation at medium throttle especially

@rcfungames

Жыл бұрын

When I did the footage I didn't take it into consideration as a person's already concentrating at trying to capture the work. But afterwards when messing around with it I put them in phase and haven't had a problem since. Mine is running nice and smoothly only have a little bit of lurching when I'm at full turn.

@grandmasteraj855

Жыл бұрын

@@rcfungames I hope my new ones are good. The problem with mine was that they were machined in such a way that made it impossible to fit the 2 halves together in-phase. No matter how I turn them and put them together they would still be out so I contacted injora. Got my fingers crossed the new set is good.

@rcfungames

Жыл бұрын

@@grandmasteraj855 don't forget the angle coming out of the transfer case and the angle that meets the axle need to be at the same angle If they are not they will always be out of phase. I hope the new set that's coming he's made right 🤞🤞🤞