No music!!! Thank God!!! May God bless you richly for not having music!!!

watching your videos is like meditation. seeing your creations fly is a pleasure. a little bit of silence and slowness in our loud and hectic world ❤

When I was (much) younger, we used to cut with a scapel, glue with white glue and cover with ‘Japanese paper’. Hours of work for a sometimes curious result. Lasers, 3D printers and mylar have revolutionised model making. But if you have a steady hand and a lot of practice, what seems easy to do is not! beautiful work, silence and perfect shot

@mitseraffej5812

Ай бұрын

Yep, gas powered noisy and smelly engines if you could afford it. For me it was mostly tow launched gliders and a two channel radio control that cost a fortune. More crashes than successful flights.

Beautiful! That's how we used to do it - except for the foam parts, all balsa & ply. I lost count of how many models I built in decades past, using this technique. The video brought it all ack. Thanks for that. And... well done, sir.

@johannesgoetzen

26 күн бұрын

How did you made the V-form? It seems complicated to put it within the ribs.

@sledawgpilot

16 күн бұрын

Except for laser cut parts. So nice compared to cutting out by hand or “die crushed”

Pure art. Wonderful, thank you for this.

You know for sure how to design slow flyers too, the models I prefer. This kind of Fauvel profile is fascinating. Thanks for your channel!

That's excellent! A beautiful model and a very enjoyable video. I operate on a tiny budget, so still build planes the old-fashioned (i.e. cheap!) way; modern tech such as computer design software, laser-cutting and 3-D printing has really transformed the hobby - but in a GOOD way. I'd love to be able to produce laser-cut parts like you; the precision is amazing. That thin foam looks very good, too. I'll have to see if I can find some here in the UK, because the price of balsa wood is becoming ridiculous. Thanks for the video, and HAPPY LANDINGS. 🙂

You are the Man, dude your design's and builds just keep getting better and better. You may want to consider putting together some kits and selling them.

All in all you've had made me speechless !

I love to watch this video... This kind of build is my favorite... A right mix of tecnology and old stuff... Love it❤ Thank you for sharing

Технология у Вас в моделировании развивается! Как всегда хортшее видео, приятно смотреть!

Wow - model aircraft techniques have changed since I last built a kit. Circa 1973... !!

@prm7216

Ай бұрын

No kidding! I was drooling over that laser cutting setup! The last wood kit I built was decades ago.

Love your effort loved the covering thanks

Fantastic! Old school construction is being rediscovered because it is still the best combination for strength/cost vs. weight.

@finn_mcmissile

Ай бұрын

I disagree, foam is cheaper and easier to repair.

@dougj8186

Ай бұрын

@@finn_mcmissile I am also a fan of foam but you missed weight. No way can an E-power 2M foam wing weigh 224gm/8oz. That said, this wing is really only for ZERO wind and too light to be practical. Everything about an aircraft, big or small, is a compromise. When you say foam is "cheaper", compared to what? Depending on wing span foam cores from a CNC shop are $60 to $80 for literally $2 of foam. Most of the cost is setup time and shipping. If you're talking about a store-bought plane, the last one I bought was a Multiplex Fun Cub, now about $150 with no motor or electronics. Few kits of that size cost much less. I'm guessing the wing in the video can be built for about $60 total, $15 airframe and $45 motor and electronics.

Your design is awesome , as are the jigs and the tools you have created. Very clever and very thoughtful problem solving.

Very cool build!

Hightech at it's best, very contemplating!😊

Old school. Love it.

Building magic....so enjoyable to watch...😏🇬🇧

Excellent Work!

always come with a good video. you are the best

fun build, I always loved putting on the monocoat, they make a smaller iron for that its so much easier than a full sized one, got mine on ebay 20 years ago for like 5$

Amazing!

Beautiful. Planks are the best.

@Zoey_the_Rat

Ай бұрын

They certainly defy expectations, but I'm still sceptical about them

That is incredible to still see. I still build my park flyers with balsa wood and dope covering. It takes a long but very rewarding to build your own RC planes. I really enjoyed this video. Thanks for sharing. Subscribed and liked.

Superb !!!

Ligero si va a salir volara de lujo . ❤

Absolut Genial ❤

Great video, it's so relaxing 👌

Thank you for no music.

Modeling anno 2024. Incredible!😊

Well Done build video - Thanks

It shows that this is not your first build. Impressive quality. 👌

what a sweet little floaty mouse. I still can't believe a straight wing plank can work but obviously it does.

@user-le6il8tz9c

Ай бұрын

it have 3-d flight assistant I think or I am wrong?

Aghhhh, him cutting those out and poking out thr pueces was like ASMR!

Amazing brother❤

This planes efficiency gonna be bonkers

It's too beautiful to fly and risk crashing. Video for the OCD crowd. Thanks you.

@baxbanni2226

Ай бұрын

Don't know what OCD means in this context. 🤔

@piconano

Ай бұрын

@@baxbanni2226 How everything has to be perfect.

Great build, wish I had your CAD expertise.

Aside from added weight, a tiny FPV cam on this would be relaxing

Easiest subcribe of my life

Sometimes I wonder about aerodynamic theory, no need for the complex flying wing reflexed airfoil just a Clark y and it flies like a dream - you even made a flat piece of cardboard fly - You’re still my favourite YT model channel. Please do a PC12 please!!

@europaeuropa3673

28 күн бұрын

A Clark Y would nose dive into the ground if the trailing edge were not reflexed. This has been known for almost 100 years.

Brilliant

I remember *_WAY_* back when I was in school, I once lent out a Book on DIY Topics that had one Project within it with plans for a Soaring Plane ( the classic design with an elongated Fuselage ) using a similar construction for the Wings ( and Fuselage ). Laser Cutters ( or CNC Machines ) were obviously not a thing back then ( at least not for regular ppl outside of the industry ) thus requiring a different approach to making things like the progressively tapered ribs like shaping them out of a condensed block of wood ( internal cavities and all ) using just two guides at the ends and then sawing the individual ribs out of the block using a bandsaw ( or perhaps stacking sheets of Balsa? ). Nowadays you just either Laser Cut, CNC Mill or 3D Print ( on much more affordable Equipment ) them out using your respective material of choice. Never once built such a plane despite its intrigue 🤣

Great job !! I can remember the times, when you do ALL these cuttings with a razor-blade and a sharp knife ! Boy o boy 😂

@danpenry8899

Ай бұрын

I'm still living in the past,, if I built that it would have to be with my coping saw drill an exacto

@foxwhiskey

Ай бұрын

​@@danpenry8899wow. Congrats for this big portion of good nerves ! 😊😅

Beautiful video thank you, I am surprised that you didnt appear to need any reflex curve on the wing? Or perhaps that coud be acheived by make each elevon be set slightly "up" ?

Fantastic build. I have tried to cover balsa builds in the past, but the wing always warps. I’m jazzed to build again after seeing this.

stunning build. when will you post the plans?

Ugožu!

Ваша аккуратность и терпение достойны уважения. Вкликолепно спроектированный и сделанный самолет, жаль только что была выбрана изначально неустойчивая схема.

@Zoey_the_Rat

Ай бұрын

Вы удивитесь как хорошо летают маленькие бесхвостки с прямым крылом. Правда, не с такими профилями

@oldcameraguy

Ай бұрын

@@Zoey_the_Rat Тут вопрос не в "хорошо-нехорошо", а скорее "зачем"? Добавь ему тоненькую хвостовую балку как на Zohd Drift или Wing Dragon - уже в разы лучше для новичка будет. И ошибок больше прощает, и позволяет загрузить нос (той же камерой), оттриммировать РВ и летать без каких-либо проблем.

Amazing build! I wonder how well it would fly if you covered the wings with C60 solar cells. Looks like you could probably get 24 or more of them on there at ~2-3W each.

Well done! What airfoil profile did you use for this?

have you tried to put a propeller inside a wing, like a ducted fan, but in blower fan style, one per wing on each side, total of two, yep large delta wings or square wings work better with internal large prop. possibly multiple smaller side-by-side wing-internal props would work too.

That is beautiful. And, the video is mesmerizing. 😊

Спасибо.

There we go there’s the ca !

Wow

👍😎

Nice plane. Is there a kit out.

How the hell is that stable?!? Amazing

No symmetrical airfoil!? That’s impressive!

@lr21643

Ай бұрын

But it's still not a good airfoil for a flying wing. I'm sure the elevons are up more than they'd need to be with a good flying wing airfoil.

❤️

Прикольный самолетик. А стрингеры и лонжероны из чего? Фанера? Шпон? Бальза?

very cool

What setting did you use on the iron to shrink the plastic?

😻

What is the material of the film used to cover the wings and rudders? I don’t think it’s possible to make a wing much lighter.

I've been thinking of building a slow-flying plane that is all just wing. This is superb! Thanks for a very good video that shows every detail of the build. Just curious about one thing. Did you use a laser cutter to cut the parts? Did you use any software for the design of the wing shape?

@NumaVIG

6 күн бұрын

diode laser cuts all colors except white and blue (for this need CO2 laser)

Well done! What software was used?

@NumaVIG

Ай бұрын

Blender

14:50 - ой, сколько же я раз таким образом переломал реек)

Which of your planes has the lowest airspeed? Thank you!

where do you get that glue and dispenser?

Как всегда, отличная работа! Пенопласт к дереву на ПВА приклеиваете?

@NumaVIG

29 күн бұрын

а есть еще какой клей похожий на сметану?

Que pegamento usas para depron ?

АГОНЬ

What type of laser cutter was used ?

what film are you using?

That glider looks like it could stay up for hours.

Hi there 😊 did you use the neje 3 plus to cut the xps foam as well?

@NumaVIG

Ай бұрын

yes, except white and blue foam

Was this real time laser CNC, how much rated laser power of these cheap Genmitsu laserheads ?

Not the way I would have constructed the wing and certainly not the amount of glue I would have used but good project for you.

подскажи пожалуйста, где термопленку покупал?

Поздравляю, ваш канал один из лучших по авиамоделизму. Опять очень интересная модель , а так же технология и в этот раз еще выбранная " неустойчивая" аэродинамическая схема. Предположил что имеет 3 -х осевой стабилизатор полета или элероны приподнятые формируя S профил нрыла или что то другое? Обьясните пожалуйста.

@NumaVIG

Ай бұрын

будет полный штиль попробую без гироскопа, а так его просто сдувает. вот с точно такой же нагрузкой на крыло в полный штиль без гироскопа и элеронов kzread.info/dash/bejne/an6OrdOzftPgo7w.html (рулевые поверхности без обдува пропеллером на такой скорости практически не работают)

@user-le6il8tz9c

Ай бұрын

Спасибо за ответ. Теперь понятно. Было очень интересно смотреть. Желаю удачи.

glider？❤

The use of XPS foam to replace balsa parts is a great idea for keeping light weight. Is the XPS 3mm foam also cut via laser, or using other technique? Is awesome that XPS foam is available in multiple colors. Like the techniques and attention to detail in your custom design.

@NumaVIG

Ай бұрын

Yes, everything is cut with a diode laser (problems only with white and blue foam)

@showusyaguppysaustralia1515

Ай бұрын

Thankyou was looking for this comment what size or watt laser is the neje 3 plus?​@NumaVIG

@NumaVIG

Ай бұрын

all manufacturers have an official website with all models and characteristics

@showusyaguppysaustralia1515

Ай бұрын

@@NumaVIG have u used a 5watt laser to cut coloured foam?

nice build and plane congratulations!!! would you share the exact brand/source of the laminating film?

@NumaVIG

Ай бұрын

no name chinese

@Wernersgyro

Ай бұрын

@@NumaVIG thanks, I was just wondering this film does shrink somewhat. I thought these laminating films would not shrink. Need to test more with what I have at home. I really like you stile of the model hobby!!

Why don’t you use ca ?

Can you please make it possible to be saved?

Yeah, it has.... dihedral!

19:34 anyone else like Shrinky Dinks.

another NumaVIG video has drop, must watch

Why sometimes superglue, sometimes woodglue?

Can you advise what CAD software you use please?

@NumaVIG

Ай бұрын

Blender

its kinda like a condor

Is there a washout (I doubt it !!) ...only Reflex ? orr errr meeeow?

@NumaVIG

Ай бұрын

washout not necessary at low speeds

Где вы берете тонкую фанеру 2мм

I had to put on Clair De Lune in the background

Задача: сделать радиоуправляемый самолет с приводом для компакт-дисков или двигателем с жестким диском (вы можете модифицировать катушку мотоцикла)

@Zoey_the_Rat

Ай бұрын

Ready enough to make. It won't fly under its own power, but I'll make it, no problem :)

what laser cutter are you using? looking to buy one for future projects

@artem56881

Ай бұрын

0:24 kinda hard to spot the name

@baxbanni2226

Ай бұрын

Neje 3 Plus.

damn that really is slow lol