Can you use the top indicators for turn signal indicators?

What does it mean if the right/red LED is steady on after I turn the bike off?

How about for a 89 TW00, will this work? Thanks!

Hello , I need some help , my milage on my older vapor somehow got screwed up last summer when my scooter was in storage for 6 months and is now stuck at 1999 miles . It was higher then that but went down and is now not going up . The magnet on the wheel is still there and the sensor is intact too . Any ideas about what happened or how to fix the issue would be much appreciated. My unit does not say vapor on it but looks identical otherwise so I am just assuming its a vapor please correct me if I am wrong . Thanks

Will this work on a mini bike or better yet generator style motor that doesn't have a full-on wiring harness

nice I was wondering I have an 1984 xv1000 yamaha can i use this on it I'm doing a bobber build looks nice

Is there anything specifically for a Kayo T2 yet? Or anything universal?

Will it work for a Honda recon

what about a plastic cover for the metal shell and/or mounts for gy6 scooters

will this work on a 2017 kodiak 700 base model that came with no speedometer? too poor to spend on an esp. jw

Can one gets suitable one for my Yamaha serow Xt 225 plus the protective casing, and for how much if am to ship to Kenya? Advice

I love mine.. water temp, air temp, speedo. I have one setup on my 1988 TRX 250r .

does it work for Aprilia mx125? all Features?

What are the settings for a 21 inch enduro wheel,? Think the most guys use it on there enduro bikes so 21inch is the normal size. They had better notice it in the paperwork

I really wanna put it on my '09 Ninja 500R. Would it fit?

Awesome product

Awesome vid

I know this is an old video but I am just now figuring out about these. On the official trail tech website it says the vapor will fit on my 2005 yamaha bruin 350 but on Rocky Mountain website it says it will not can someone help?

Can you fit to a 2018 suzuki-ozark-250?

I don’t have a option for 2002 TTR250 so what do I do?

dose it fits in a Yamaha Raptor 700r 2020 ?

Will this work on a 1983 atc250r

Will This Work On My Shifter Kart? The Engine Is a 140cc Pit Bike Engine

Rocky, kindly facilitate I get a used one and have it sent to Kenya for my Serow. Kindly advice

Can this be hooked up to 2006 CR85

Looks good qq if I'm buying a honda xr650l duel sport would it replace the speedometer or would it be put on as a secondary???

@rmatvmc

3 жыл бұрын

Most people mount the Trail Tech Vapor in addition to the stock speedometer/gauge cluster but I have seen on forums where people do a little extra work and completely replace the stock gauges.

Can you have the light on the screen stay on for night/ evening riding ?

@rmatvmc

4 жыл бұрын

Yes you can keep the back light on while riding at night.

I realize it is not resetable but can I set the art and odometer to my current readings upon initial setup??

@jjakes5589

Жыл бұрын

Yes

Does it still fit if you have protaper bars on and your key in normal spot

@whosyou1116

3 жыл бұрын

Yes

Will this work for a 2019 Kawasaki klx140g? Because it asks for my bike but i dont see the 140g.

@masonroy2944

3 жыл бұрын

It’s a universal kit. You can make it fit your bike. The installation is the same for any bike you put it on

This may be a silly question but does the odometer reading starts at 0 when you first install it or do you need to manually enter it? Also, does it reset if the battery dies?

@jddenham

9 ай бұрын

Great question - also waiting for an answer.

i just got a Honda CRF 250L what has this on it but the rev and speedo is not working can you help

@rmatvmc

3 жыл бұрын

You will want to go through and check all the sensors and wiring. You can check out the link below to directions on the Vapor which should help you figure out where your problem is: www.rockymountainatvmc.com/docs/vapor_instructions.pdf

Are you able to adjust wheels size?

@rmatvmc

5 жыл бұрын

Yes, you can definitely adjust the wheel/tire size to your needs.

Might sound stupid, but can you replace the battery in it after it dies?

@HotTubOfSexy

3 ай бұрын

yes it takes a CR2032 battery

@TEENYcharma

11 күн бұрын

Well that battery is only used for the clock so it keeps time while the bike isn’t running. You prolly won’t need to worry about that

Will it work on Yamaha tw200 2019 -2018?

@storman7609

5 жыл бұрын

Show my video TUTO : kzread.info/dash/bejne/jKmVxNGBfanQh9o.html

Will the tac work on a bike that comes with no gauges

@rmatvmc

2 жыл бұрын

Yes, that is the whole idea.

Im interested but how to purchase? How much?

Does it show what gear you are in ?

@rmatvmc

4 жыл бұрын

No, unfortunately this unit does not have a gear indicator.

So, it has its own battery source or does it have to be wired?

@jstephens1193

2 жыл бұрын

It has its own coin battery.

Yamaha banshee??

Will it work on a 2007 raptor 700r se ... if so is there a mounting bracket for it and my quad

@rmatvmc

4 жыл бұрын

Yes this will work on your Raptor and the mounting hardware will be included!

@theman4576

4 жыл бұрын

@@rmatvmc ok thank you

what if i already have hours on the bike..say 50 can i start the hour meter there? 2018 crf250r

@rmatvmc

5 жыл бұрын

Unfortunately, I don't think that is an option for these. But if you know how many hours you already have on it you can always just add that on.

@anthonylangston8488

5 жыл бұрын

not sure about hours, but this is to add mileage. :Press and hold all three buttons down for three seconds to enter the data setting mode. Once there using the mode button progress to the tire size. At the tire size enter 9110 using the left and right had buttons to increment the digits. Immediately after entering the new tire size press and hold the right hand button down for three second. This should move to a screen with ( 12HR ) flashing on it. If this is displayed you are in the permanent data set so any alterations will be saved to the permanent information. Once in this data set again using the mode button move to desired screen in this case the screen that reads ODO for odometer. Finally using the left and right buttons again alter the ODO to desired mileage. Once complete you can either wait for five seconds and let the Vapor revert back to the main screen or you can use the mode button to reach the main screen. Resetting the proper tire size is not needed since the Vapor with automatically default back to the values you had set prior to this adjustment.

Would it work on a 2018 raptor 700r se

@mikep996

3 жыл бұрын

Yes

Does this works on an old polaris sportsman 700 twin 2002??

@mikep996

3 жыл бұрын

I'm sure it probably would

Will this work on a 2017 base model kodiak 700

@rmatvmc

4 жыл бұрын

We don't have the Vapor available for your ATV, but we do have 3 other Trail Tech computers that will work for your machine. You can check those out here: www.rockymountainatvmc.com/parts/atv-electrical?v=2017-yamaha-kodiak-700-4x4

Does it work for kfx450r?

@rmatvmc

4 жыл бұрын

Yes, these will work for the KFX! Just make sure you enter your quad on the product page. www.rockymountainatvmc.com/parts/trail-tech-vapor-speedometer-tachometer-p

Can this work on a 03 yamaha blaster

@thomashamilton402

4 жыл бұрын

Yes you just have to google search for it. I have one on my blaster

Will that work on 2007 Kawasaki Ninja 250R?🥺

How does it get it's rpm signal and can it be driven by an inductive sensor for rpm

@masonroy2944

3 жыл бұрын

I’m pretty sure you splice a wire leading to your spark plug and that’s how it gets the rpm

@Forzaplayer

3 жыл бұрын

@@masonroy2944 turns out you don't splice anything. I bought this product 3 months ago.. You wrap the wire around your spark plug wire between the two boots and it wirelessly/inductively reads the RPMs by pulses through the wire.

@Forzaplayer

3 жыл бұрын

@@masonroy2944 if you go onto the trail tech website you can download their user manuals and in each there are installation instructions. Most all the trail tech gauges use this method.

Will it work for banshee

@rmatvmc

5 жыл бұрын

Yes, these will work for a Banshee 350. Just make sure to select your correct machine when looking at the part. You can check it out here: www.rockymountainatvmc.com/parts/trail-tech-vapor-speedometer-tachometer-p Thanks for watching!

3:11 if I change my current clock will my ART change

Will it work for 04 crf450r

@rmatvmc

4 жыл бұрын

Yes this is available for your bike. www.rockymountainatvmc.com/parts/trail-tech-vapor-speedometer-tachometer-p

How do you turn off this gauge after the bike is off with it connected to electric start?

@rmatvmc

17 күн бұрын

The gauge will turn off automatically after 20mins of the bike not moving.

Can you get this to fit a Chinese Hawk 250 dirt bike?.

@rmatvmc

5 жыл бұрын

I'm not familiar with that bike so i can't give a great answer. But if your bike has wiring harness/system then you should be ok.

@bbundridge

5 жыл бұрын

Yes, it does work, however, this is already a great digital speedo available that is plug and play for the Hawk 250. Look on the Chinarider forum or hawk250 dot com

What is the battery life like ? Is it replaceable or will I need to buy a new one ?

@rmatvmc

4 жыл бұрын

These are designed to plug into a bike's wiring harness and use the bike's power source. You will not need to replace the battery.

@garaythewizard6753

6 ай бұрын

@@rmatvmccan put this in a banshee without batterie?

How do you set up the time?

@rmatvmc

Жыл бұрын

Here's a link to the instructions: www.rockymountainatvmc.com/docs/vapor_instructions.pdf Page 16 is where the instructions are for configuring the settings.

This fit a yamaha Raptor 350 2006

how does it look at night?

@UnixX585

3 жыл бұрын

And will it work on a qlink xf200 enduro?

Is there a light or a signal that tells you when your on nutreual

@rmatvmc

3 жыл бұрын

The Trail Tech Vapor does not have a neutral indicator light.

@chichosqueeze20

3 жыл бұрын

Any other recommendations of speedometers with neutral indicator light im a beginner rider

Is it universal for dirt bikes?

Does it get wired to the bike’s battery

@rmatvmc

2 жыл бұрын

That is correct. There is an instruction manual for the Trail Tech Vapor you can check out here: www.rockymountainatvmc.com/docs/vapor_instructions.pdf

Will work for banshee 350

@impact0r

5 жыл бұрын

Thanks for the confirmation.

What makes it vehicle specific? Why can't is be universal to use on any bike?

@rmatvmc

2 жыл бұрын

There are a few different mounts and some bike-specific sensors. With that said, these units can still be used on a wide range of machines.

Work in a yfz 450 2005?

@rmatvmc

4 жыл бұрын

Yes, we do have this available for your machine. Check the link below for more information: www.rockymountainatvmc.com/parts/trail-tech-vapor-speedometer-tachometer-p

Install video would be nice.

Will this work with Kawasaki Bayou 250?

@rmatvmc

5 жыл бұрын

Unfortunately, this is not made for the Bayou 250. Sorry about that!

@garretth0707

3 жыл бұрын

@@rmatvmc will it work with a yamaha grizzly 660? And does this have a 4x4 indicator?

I would like to know the price of that complete kit

@japhethgraber2605

3 жыл бұрын

Daniel Kiogora it like 150

I can’t figure out how to switch it back to mph ?? Some how it changed to kph

@rmatvmc

3 жыл бұрын

Below is a link to the Trail Tech Vapor Instructions, where instructions on how to switch between M/H and KM/H can be found on page 16. www.rockymountainatvmc.com/docs/vapor_instructions.pdf

@strictlystreet1517

3 жыл бұрын

@@rmatvmc Thank you thank you I appreciate it I will comment back on here once I figure it out and get it back to miles per hour I appreciate your help good business right there

Will this work on my 2000 Honda xr 200r ?

@rmatvmc

5 жыл бұрын

We don't carry it for that bike but Trail Tech does offer one on their site. The part number you would need for your bike is 752-115. Hope that helps!

@ronin99999

5 жыл бұрын

@@rmatvmc thank you

Will it work for husqvarna FE501 2018

@rmatvmc

5 жыл бұрын

Yes, these are bike specific and will work for your 2018 FE501. You can check it out here, just enter your bike and you'll be good to go: www.rockymountainatvmc.com/parts/trail-tech-vapor-speedometer-tachometer-p Thanks for watching!

@storman7609

5 жыл бұрын

Show my video TUTO : kzread.info/dash/bejne/jKmVxNGBfanQh9o.html

Is it waterproof?

@rmatvmc

3 жыл бұрын

This computer is not waterproof but will hold up just fine to rain, mud and washing your machine.

How to change to mph

@rmatvmc

4 жыл бұрын

The link below will take you to the instruction manual for the Trail Tech Vapor. Directions for kph to mph conversion should be located on pages 16 and 17. www.rockymountainatvmc.com/docs/vapor_instructions.pdf

I think the hour meter should be resettable because I always get a new hour meter everytime I do a complete rebuild on my bike

I have one on a 2019 Raptor 700 keeps killing my battery anybody have any suggestions

@alphadata3652

3 жыл бұрын

Kill switch

Anyone running this on a banshee?

Can it get wet

I'm looking for this item for my 2020 Raptor 700r se

@rmatvmc

4 жыл бұрын

This would be a perfect addition to that and congrats on the new quad!

@radiouniquefm

4 жыл бұрын

@@rmatvmc thank you 😊 do you have a link I can purchase it please

@rmatvmc

4 жыл бұрын

@@radiouniquefm Just enter your machine on the product page and you'll be set! www.rockymountainatvmc.com/parts/trail-tech-vapor-speedometer-tachometer-p

I really want to get one and it would be nice to get a aluminum cage for it but $160 for everything.. it’s too expensive for me I’m only 16 I would love to get into racing

Recon 250

Id rather have a resetable trip meter than a ride time clock

It's to small

@notcayden_yt3847

3 ай бұрын

Nah

@RobJob110

26 күн бұрын

You are too small.

will this work on yamaha TTR 250 open enduro ?

will this work with a yamaha bruin 250 ?

@rmatvmc

4 жыл бұрын

Trail Tech doesn't list any kits working for the Bruin but they do have some for other ATV's so you may be able to contact them directly and see if you would be able to make one work for your quad.

Recon 250

Will it work at an mz Sm 125 2004?

@hopeoverexperience8929

4 жыл бұрын

I asked the company a while back regarding a possible installation for an MZ sx125, their verdict was it should be possible, but probably best to contact them and get the right version number, which I don't have to hand. There is a 'generic' version for a single cylinder four stroke, you may need to go the route of a temperature sensor that attaches to the radiator rather than the one that goes inline with the coolant flow, from memory the issue was the pipe/hose diameters being mismatched. Probably the greater issue will be getting the right sensors, the head itself should then work fine, I still plan to use one but haven't got to that stage in the build yet. Best of luck.

Recon 250