Trail Tech Vapor: amzn.to/452hkK1 How to make your dirt bike street legal pt.3 of 6
Жүктеу.....
Пікірлер: 15
@Acespaceraceterrace8 ай бұрын
My vapor keeps resetting itself is it because of the battery in the product is date out ? And can you use any normal copper wire to wrap around the spark plug where i live it’s hard to get by the spare part’s
@guiltygearcore2 ай бұрын
Nice vid sir. Does the Vapor includes the bracket or you'll have to buy it separately? Thanks
@muriuwangai36179 ай бұрын
Hi, liked your content all the way from Kenya. Am looking for a good working, 2nd hansapor or Voyager unit. Any leads?
@DirtbikeJourneys
9 ай бұрын
Thanks for tuning in. Sorry no leads.
@philbowden19616 ай бұрын
Please don't forget to 10amp fuse red wire from battery.
@benrtd
4 ай бұрын
Instructions call for a 1 amp fuse, not 10 amp.
@johnsesk0110 ай бұрын
Did you end up installing the temperature sensor? I see you have a air cooled engine
@DirtbikeJourneys
10 ай бұрын
I did not yet. Do you think it’s important?
@johnsesk01
10 ай бұрын
@@DirtbikeJourneys yes a had it on my 450x and bike would over heat every once in a while so good thing to have.
@DirtbikeJourneys
10 ай бұрын
@@johnsesk01 Ok I havent had any over heating issues but thats good to know.
@MOTOBLOGGER839 ай бұрын
Hello, y stall one of those, but the speed is wrong Do you know what size did u configure the weel I have the same bike
@DirtbikeJourneys
9 ай бұрын
Front tire is 21 inches
@jasonb6570
5 ай бұрын
@@DirtbikeJourneys The rim is 21 inches. The tire is bigger than that.
@DirtbikeJourneys
5 ай бұрын
@@jasonb6570 21 inches is what the front wheel is and 21 inches is the number you need to input on the vapor.
@jimellis1810
2 ай бұрын
@@DirtbikeJourneys You need to input the circumference of the front tire itself (at least that is what I have to do on my Trail Tech Endurance II meter). You can do that by marking the ground for some reference point on the tire like the valve stem. Then roll the bike straight from that marked ground point until the valve stem makes one full rotation. Mark the ground there and then measure the distance between the 2 marked ground points.
Пікірлер: 15
My vapor keeps resetting itself is it because of the battery in the product is date out ? And can you use any normal copper wire to wrap around the spark plug where i live it’s hard to get by the spare part’s
Nice vid sir. Does the Vapor includes the bracket or you'll have to buy it separately? Thanks
Hi, liked your content all the way from Kenya. Am looking for a good working, 2nd hansapor or Voyager unit. Any leads?
@DirtbikeJourneys
9 ай бұрын
Thanks for tuning in. Sorry no leads.
Please don't forget to 10amp fuse red wire from battery.
@benrtd
4 ай бұрын
Instructions call for a 1 amp fuse, not 10 amp.
Did you end up installing the temperature sensor? I see you have a air cooled engine
@DirtbikeJourneys
10 ай бұрын
I did not yet. Do you think it’s important?
@johnsesk01
10 ай бұрын
@@DirtbikeJourneys yes a had it on my 450x and bike would over heat every once in a while so good thing to have.
@DirtbikeJourneys
10 ай бұрын
@@johnsesk01 Ok I havent had any over heating issues but thats good to know.
Hello, y stall one of those, but the speed is wrong Do you know what size did u configure the weel I have the same bike
@DirtbikeJourneys
9 ай бұрын
Front tire is 21 inches
@jasonb6570
5 ай бұрын
@@DirtbikeJourneys The rim is 21 inches. The tire is bigger than that.
@DirtbikeJourneys
5 ай бұрын
@@jasonb6570 21 inches is what the front wheel is and 21 inches is the number you need to input on the vapor.
@jimellis1810
2 ай бұрын
@@DirtbikeJourneys You need to input the circumference of the front tire itself (at least that is what I have to do on my Trail Tech Endurance II meter). You can do that by marking the ground for some reference point on the tire like the valve stem. Then roll the bike straight from that marked ground point until the valve stem makes one full rotation. Mark the ground there and then measure the distance between the 2 marked ground points.