Nice rig! We need to see mor e 1st gen Tacomas being upgraded here.

@azorianification

4 жыл бұрын

Agreed. I have a ton of more upgrades planned so hopefully this will inspire more 1st gen owners to post videos. 🍻

Hey men just wanted to let you know that you were a big help in giving me courage to do this my self. You save me a ton of money,time and I learned something new thanks

@azorianification

3 жыл бұрын

Glad you found the video helpful. Hopefully this will give you the confidence to tackle other upgrades/repairs to your truck. As difficult and frustrating as it can be at times it’s very rewarding at the end of the day when you’re done. 🍻 Thanks for the kind words

@tkyoo7917

2 жыл бұрын

wa

my new ones show up tomorrow. This will be my first attempt. Thank you for the info, very calm and thourough explaination. I appreciate that. some vids hard to watch, this one's done very well.

@azorianification

4 ай бұрын

Thanks for the kind words. Glad you found it helpful. Good luck on the install and let us know how it goes 🍻

Thank you for posting this. Never taken leaf springs apart before, but you’ve given me the confidence to do it!

@azorianification

Жыл бұрын

You’re welcome! Which leaf springs are you upgrading to? 🍻

@BDoh

Жыл бұрын

@@azorianification No spring upgrade for me. I’ll be pulling the rear axle to swap in an e-locker and while it is out I’m pulling off the leaf springs to cut a bunch of rust out of my frame. Then I’ll weld in some Safe-T-Caps with new integrated hangers, replace bushings etc and button things back up.

@azorianification

Жыл бұрын

Sounds like an upgrade! I’d like to add an e locker to my 88 4x4 chinook build one day. Is your truck a daily?

@BDoh

Жыл бұрын

@@azorianification It’s a 95 4x4 extra cab automatic, and it’s on part time daily duty with a 2014 Cayman. I’ll need to make sure I don’t need to haul anything large while it’s in pieces 😆

@azorianification

Жыл бұрын

Good idea. Thankfully I’ve only had a few bolts give me trouble on this truck in the past. Do they salt in your area?

Hello, this is Edwin from Puerto Rico. I own a 2002 v6 Tacoma. Than you so much my friend for the informationon the canopy !

@azorianification

3 жыл бұрын

No problem Edwin, glad you enjoyed the video

Thanks for the video, just completed my rear and your info was invaluable!

@azorianification

4 ай бұрын

Nice! Which brand did you get?

@rm2051

4 ай бұрын

OME EL 122RAB with D43XL AAL sitting on Bilstein 5100 559/560. Quite a bit of lift, 40.75, with a topper and 280 lbs of sand(lot of snow in Colorado). Hit the PB blaster put hard on the lead up but I had purchased an extra front shackle bolt just in case! I had to bend my ebrake cable guides up to clear the leafs(2001) but it worked and no drag so far. OME Fk21 extended exhaust hanger doesn't provide much more clearance than stock so the pipe is hung a tad but I guess I will get some type of bracket to drop it a little further. Again appreciate the video!

Unexpected side effect of your video… it helped me confirm that my OE leaf springs were installed backwards by the PO, probably after the frame swap. I was searching the issue because my rear wheels sit of center of the wheel well, to the rear. And now I have to replace them with OME since you showed me how to! Great video, thanks

@azorianification

11 ай бұрын

Sucks to uncover other problems but it sounds like this will be resolved with the OME upgrade

@jessesmythe2726

10 ай бұрын

I think i have the same issue!! just got a truck, and both back wheels are slightly back like you have. Going to get a new set of leafs and replace.

@azorianification

10 ай бұрын

Replacing with OEM?

Just the video I've been waiting for. Excellent work and keep us posted 👍

@azorianification

4 жыл бұрын

Planning on picking up a set as well?

@slayer4130

4 жыл бұрын

@@azorianification yes i am. Need to upgrade the suspension. Can't wait since I am still sitting on all stock.

@azorianification

4 жыл бұрын

Are you still running stock size wheels/tires?

@slayer4130

4 жыл бұрын

@@azorianification yea i am.

@azorianification

4 жыл бұрын

Are you planning to go bigger? I’m undecided what size tires I should run now that I’ve completed the lift.

Good video...iam currently about 10 minutes from putting Dakar on my 03 Xtra cab. Thanks for the info.

@azorianification

Жыл бұрын

Nice! Good luck! Did you also get a set of greaseable shackles? 🍻

@jwatkins9520

Жыл бұрын

Not yet..but I greased the shit out if everything during the install.. haha

@azorianification

Жыл бұрын

Nice! Don’t forget a little PB blaster 🍻

Hi 🆘🆘🆘 So all in Satisfied with the set up

@azorianification

2 жыл бұрын

You’re running the same setup?

Looks awesome, I just did the same leafs on my 03 4 cylinder 4x4 and gotta say really happy with them, so glad I didn’t buy that stupid bracket for the exhaust! I bought a 2 1/2 coupling and 2 clamps yesterday and plan on a side under frame rail exit after I shorten it , best thing I can come up with for now

@frankfilippone9679

3 жыл бұрын

Check it out @frankrubicon_ if you get a chance

@azorianification

3 жыл бұрын

I’ll check it out. Did you go with the AAL?

@frankfilippone9679

3 жыл бұрын

Leafs Look exactly the same as yours, I did a spacer in the front for now ( Want to SAS , I have a hybrid Jeep XJ D30 hp in the works with D44 outers chromo axles lunch box , probably do front leaf kit from TG ) made some clearance for the 35s with a hammer lol she’s a 2.7 auto with 4:56 stock gears for now, I’m coming from the Jeep world so just started learning about Toyota’s , so far I love my taco

@azorianification

3 жыл бұрын

Love the XJs. You’re going to really enjoy the Tacoma. Aside from the SAS, what other plans do you have for it?

@frankfilippone9679

3 жыл бұрын

5:29s , bumpers sliders, supercharger etc. I used to have a 4.6 stroker XJ and kinda over do it all the time! Lol

Thanks for the video .... Im gonna need to do this to my '99, 265,000 miles and im usually pretty heavy loaded

@azorianification

2 жыл бұрын

What brand are you going with?

@cabbyhubby

2 жыл бұрын

@@azorianification ..... probably going to use my local spring shop ...theyve been around a long time and excellent reputation ... WC Supply,Tyler,Tx ... I dont want a lift ... stock height or 1" higher

@azorianification

2 жыл бұрын

A custom setup would be great. Unfortunately I don’t have access to a shop like that around here. What does something like that cost?

@cabbyhubby

2 жыл бұрын

@@azorianification .... I dont really know, but im expecting a lower cost than OME, ill post it after i get it all, i rebuilt my front end last winter, ran me $1500 parts and I did all the work

@azorianification

2 жыл бұрын

Nice! Let me know how that goes and what it ended up costing you.

Oh, and if your ever in Southern Oregon, you should come on a Tacoma trail run with us! 😁

@azorianification

4 жыл бұрын

Where in S Oregon are you located?

@yoboo6167

4 жыл бұрын

@@azorianification Rogue Valley area. I pack more weight than I should on a daily basis lol. So yeah, the Dakar pack with an aal in the back, and OME up front with the 882 for max height. Honestly, once I get my winch mount built I'm hoping the front will sag a bit more. My taco doesn't seem to like the 3 inch in the front but it's settling in pretty fast.

@azorianification

4 жыл бұрын

That area is beautiful. 🍻The 882s are for additional weight up front, correct? If so I may need to upgrade my 881s in the future because I’d also like to get a bumper and winch.

@yoboo6167

4 жыл бұрын

@@azorianification It is gorgeous down here! We are spoiled rotten haha! As far the coil goes, yeah, 881 for regular duty and 2-1/2" lift. 882 for regular duty and 3" lift. 883 for heavy duty and 2-1/2" lift before you add any weight! I wanted the softest ride and max lift. So 882 I thought would settle into around a 2-1/4 lift by the time I do a hidden winch mount. Just a better angle for the cv's. If my 33's start to rub after I add a winch I will just do a 3/4" to 1" body lift and call it good.

@yoboo6167

4 жыл бұрын

Like Roger Brown (@4crawler) says, lift as much as needed and as little as possible!

I've got a full OME heavy setup on my 2004 double cab. Your gonna love your new ride and the more weight you throw in your truck, the better it rides! Be sure to re-torque after a week and again at a month. Whenever I do my 3 month service on my truck I just check everything one more time 😉. Food for thought, Every once in a while, check your tranny mount bolt to make sure it's tight on the cross member. I was having a little issue with it and found it had worked its way loose to hand tight! I think that's why alot of people end up tearing that bushing mount. Just tighten it up, and stay up on your maintanece...its a Toyota! It will run forever! Haha.

@azorianification

4 жыл бұрын

Thanks for the heads up. I’ll be checking everything again soon to see if anything needs to be retorqued. When you mentioned the HD setup are you referring to the AAL? It feels great so far🍻 Can’t wait time see how it feels with more weight.

@thedetective8150

4 жыл бұрын

Awesome tips and info!

Excellent video. I'm looking at the same leaf springs for mine. Currently running Billstein 5100 front and back, fronts on middle setting. I also have a camper shell. Hopefully I don't get too much rake.

@azorianification

4 жыл бұрын

Thanks. How much of a lift do you get on the middle setting with the 5100s?

@jpsyoda82

4 жыл бұрын

@@azorianification 1.5" or so. I have 265/75/16 tires that clear no problem and also ARB bumper.

@azorianification

4 жыл бұрын

That should be perfect. How do you like the ARB bumper? I’m planning to buy one of those in the future. 🍻

@jpsyoda82

4 жыл бұрын

I love it. It's nice peace of mind to have that extra protection in the front.

@azorianification

4 жыл бұрын

jpsyoda82 do you have a winch as well?

Thank you for this beautifully made video packed with lots of very important infirmation ! Now I feel I can do my 2002 Tacoma leaf springs. I love the canopy on your truck. Where can I buy one and how much they go for ? Thanks again. Your friend from Puerto Rico ,Edwin

@azorianification

3 жыл бұрын

Thanks. It’s not that difficult of a job if you take your time. Glad you’ve found it helpful. The canopy is a Leer. I bought my used for $200-300 a few years ago

Great video Thanks!!

@azorianification

2 жыл бұрын

Glad you enjoyed it and hopefully you found it helpful 🍻

Love the Tacoma. Have an 01 double cab, I’ll be doing an OME suspension soon, this was very helpful thank you!

@azorianification

4 жыл бұрын

Awesome! Are you still on stock suspension?

@brentbroughton7989

4 жыл бұрын

Daily Night Society yep, all stock everything essentially. Everything is solid, pretty clean. New frame. No rust except one side rusted rocker, no holes, but the seems are rusty

@brentbroughton7989

4 жыл бұрын

Seam *

@azorianification

4 жыл бұрын

You’re going to love how the new setup feels. Are you doing shocks and the leaf pack?

@brentbroughton7989

4 жыл бұрын

Daily Night Society Yes. That’s good to hear ! I want to do them both, the suspension is pretty sacked, I’m really looking forward to how it’ll feel

Undercarriage is so clean, that thing will last forever. 😳

@azorianification

3 жыл бұрын

I sure hope so. I have no plans to get rid of it. 🍻

Thanks Well done Just the look at that spring pack suggests … way firm for casual use Some posts note removal of 3rd from top leaf “ Maybe easier said than done on a driveway ?

@azorianification

2 жыл бұрын

It’s not impossible on a driveway but a lift would have made this job a lot easier

Well Done! I am thinking about upgrades for my '04 as well. Thanks!

@azorianification

4 жыл бұрын

Have you upgraded any of the suspension yet?

@NicholasBrule

4 жыл бұрын

@@azorianification I am ashamed to say No I have not. lolz It's waaaay overdue.

@azorianification

4 жыл бұрын

In that case it will feel amazing when you eventually replace everything 🍻 it made a huge difference over my old suspension.

@NicholasBrule

4 жыл бұрын

@@azorianification I am getting a new camera soon so I will be sharing adventures as well!

@azorianification

4 жыл бұрын

Nice! Let me know when you have something uploaded. I’d love to see what you do with your 04. What kind of camera are you getting?

Very helpful.

@azorianification

3 жыл бұрын

Thanks. Glad to hear that

Can you let me know what did it finally settle at and did you have CV boot issues? Thanks!

If you do any off-roading, considering cutting an inch or so off your U-bolts! looks like that have a ton of access threads showing:)

@azorianification

4 жыл бұрын

I noticed that as well. The U bolts I need up being longer than I would have liked. Anything I do off-road is pretty mild, but I’ve been thinking about shortening them. Thanks for the heads up 🍻

@adammasters3228

4 жыл бұрын

@@azorianification Since the off roading is mild, maybe keep the extra length on the u-bolts incase you decide to (Add a leaf).. otherwise its very common that folks chop off the extra length. Cheers!

@azorianification

4 жыл бұрын

Good point. I wasn’t sure if I needed the AAF right away. I’ll see how it goes after a summer of camping. Do you have a similar setup?

@dailynightsociety awesome video. Are those the medium duty leaf packs or heavy duty ? Im shopping on head strong off road and cant decide with one to go with i have a camper shell also

@azorianification

3 жыл бұрын

Heavy duty comes with the AAL? I currently do not have the AAL

Clarification per the PLUS signs. Not all have PLUS signs, or at least only plus signs. For anyone wanting clarification: The + is for a spring with a slightly higher spring rate, while the minus is for slightly lower spring rate. If you have a spring with a "o" it has a spring rate dead on

Thanks for the Video, My rear springs at 300k far worse than yours, but time for a upgrade ! Are You satisfied with the Dakar spring selection? I am looking at a complete kit for front and rear w/Dakar springs, 880 or 881.

@azorianification

3 жыл бұрын

I really love the setup. The only issue so far is my leaf pack has begun to squeak a little. I need to figure out a solution to this. Otherwise they have been great.

Hi! First of all, great video! Secondly I had a question concerning leaf springs. I ordered online an OME lift kit and had trouble with the shipping ( UPS lost my order). Had everything except I was missing a leaf.. They sent me another one but they’re both the same side ( B side). My question is does it make a difference between A side and B side? Thanks!

@azorianification

10 ай бұрын

I believe it does matter. There is a difference between the two. Were you given instructions from OME? It should say if that is the case. It’s been a while so it’s also possible they no longer make them like this anymore.

I just installed mine last week, and what I noticed my rear end move forward like one inch, that is the only thing I don’t like other than that I’m happy

@azorianification

3 жыл бұрын

Congrats! How’d the install go? Did you install greaseable shackels?

@jcorona25

3 жыл бұрын

@@azorianification yes I installed the greaseable shackles, I used to have a greaseable 120mm bolt too but I wasn’t able to install it, the bushings that I had were a bit smaller than the eye of the leaf springs, I need to find the proper size bushings for the bolt that I have and and the eye of the springs... or buy a totally different kit

@azorianification

3 жыл бұрын

What brand did you go with for the shackles? Did you also purchase the OME bushings?

@jcorona25

3 жыл бұрын

@@azorianification yes same brand OME

@jcorona25

3 жыл бұрын

I have to call All-Pro off-road where I bought the springs hangers and the greaseble bolt and see if they have bushings that fit the eye of dakar leaf springs

Hey sweet install, quick question.. does the exhaust hit the leaf spring or bracket at all, any rubbing issues w that?

@azorianification

3 жыл бұрын

I added the exhaust relocation bracket to avoid this. I believe you can cut the exhaust tip to avoid it hitting anything. I think there is a link in the description to the bracket I’m referring to. 🍻

@joselozano2686

3 жыл бұрын

Thanks for the reply, yea cuz I have the same kit but looks like it is so close that’s it will rub if it flexes but I’m not sure since I stopped when I noticed how close they are, I figured I could ask since someone else who has experience

Watched your video today and changed my rear suspension. Wasn't super difficult but I was wondering what all the torque specs you used were?

@azorianification

4 жыл бұрын

The torque specs I used are in the video description. Did you also go with the Dakars?

@SCWW

3 жыл бұрын

If you get the Chiltons manual, the torque specs are in there. It's recommended for anyone doing their own car repairs.

where did you purchase your extended u bolts? can you post a link ? Thank you awesome video

@azorianification

4 жыл бұрын

I don’t know where you are located but wheeleroffroad online will carry the extended u bolts. I was able to purchase mine locally at an over landing shop.

Same as mine 👍I bought the Western chrome nerfbars 1year time rusted thay say there stainless not called an thay warranty it gave me a new set covers dry rotted an cracked

@azorianification

8 ай бұрын

That sucks. What are you going to do

For the bushing kit you listed. Is that for the upper shackle? Or just the leafs? My dakar didn't come with any bushings, so I need to find some and for the shackle as well. 95 tacoma

@azorianification

2 жыл бұрын

You just purchased the leaf springs themselves and need the full bushing set?

Nice video. I'm about to change mines also. Did you ever change the brake line? If so where did you get the lines from?

@azorianification

Жыл бұрын

I still need to. Most off-road/overland shops will sell an extended brake line. Which leaf springs are you getting?

@pauloramirez8216

Жыл бұрын

@azorianification I have the same kind you have. But I believe mines are the newer darkars because they start with EL on the part number, and they are spaced between each leaf.

Hi Great video Any updates 2022 Any other plans?

@azorianification

2 жыл бұрын

Thanks. Yeah I have plans for the Tacoma this year. At the moment I’ve been spending a good amount of my free time in my chinook. I also picked up an 88 4x4. Too many projects not enough time. What about you?

How far do you think the axle had to come forward for center bolt to fit? Mine seems 3 inches off and that seems like super far.

@azorianification

Ай бұрын

Maybe a little. It’s hard to say because I didn’t think to measure beforehand so I’m not sure if it even moved at all. Visually it seems to be slightly forward of the centerline of the wheel arch. Did you measure beforehand?

What is the max weight that the leer can hold up? Im thinking about getting a roof top tent as well.

@azorianification

2 жыл бұрын

There are two ratings for the canopy. The static weight and the dynamic weight. I’m not sure which model you have but mine can handle the weight of my RTT.

Would you be able to put updated links for the leaf springs? They’re currently unavailable from the links posted. Thanks!

@azorianification

2 жыл бұрын

It looks like the listing was removed from AMZ. You should check with your local ARB dealer

where is the link for the front leaf spring nut? also what is the ubolt length? Thanks for the video!

@azorianification

4 жыл бұрын

The length of u bolts I used was 8 1/2in. As for the nut I didn’t see an amazon link so I’d just use the part number and pick it up locally or from an online Toyota parts supplier in your area. 🍻

Did you also lift the front of your truck? If so, what did you do up front and how much lift does your front have?

@azorianification

3 ай бұрын

I did. I also made a video with the front suspension install. I went with OEM struts and springs. 🍻

My 2000 prerunner V6 measurement is 36 inches. I have to replace the spring by looking at your video. Thanks.

@azorianification

Жыл бұрын

Front? Which springs are you going with?

@harakiri881

Жыл бұрын

@@azorianificationRear 36" from ground to fender. Leaf spring is sagged.

@azorianification

Жыл бұрын

Do you have a canopy?

@harakiri881

Жыл бұрын

Leaf spring is Shot.

@harakiri881

Жыл бұрын

@@azorianification Where did you buy the springs?

I noticed your truck has a very rare sunroof . Was that an original option or was it an aftermarket custom install ?? I have never seen a 1st gen Tacoma with that luxury.

@azorianification

3 жыл бұрын

Factory option. I haven’t seen many 1st gens with sunroofs. 🍻

What the part number or names for the greasable rear shackles and the rear brake line extender? Thanks!

@azorianification

2 жыл бұрын

I haven’t purchased them yet.

Would you be able to get a part number for your tow hitch ? I noticed that it’s a ROUND tube and a 3 Piece one. I have been looking for one like this for my Tacoma, but could not find the manufacturer of it or part number.

@azorianification

3 жыл бұрын

I’ll check and post up an part number I find. I believe it had a uhaul sticker on it. I doubt they manufactured it but maybe you can figure out who did. 🤷‍♂️

@azorianification

3 жыл бұрын

Are you n IG? I can send a photo

Clean build man! Any idea where you got those fender flares?

@azorianification

2 жыл бұрын

Thanks! 🍻These are the OEM flares. Do they look different to you?

@n00dnarb10

2 жыл бұрын

@@azorianification ohhh my bad I had no idea those were factory 😅 I have a 96 sr5 and wanted flares of that style

@azorianification

2 жыл бұрын

🍻

I was wondering how high do the front structs & spring make? 2.5 inches or higher?

@azorianification

2 жыл бұрын

I believe this combo would give a lift between 2.5-3ins

Thank you for the video. Your presentation is excellent. I have read every comment and and appreciate you taking the time to answer everybody. I'm like one of the other guys(a medium/low skilled mechanic) I have a 96 that's stock and I'd like to do this. Your video is really helpful. Do you think this would be easier with the bed removed? I want to remove mine and bullet proof my frame...So maybe do this at the same time?

@azorianification

3 жыл бұрын

No problem. Glad you found it helpful. I try to show each step of the process even if it seems unnecessary. Hopefully others will also find my 1st gen videos beneficial. Unfortunately most of the how to videos focus on the newer Tacomas.

@azorianification

3 жыл бұрын

It isn’t necessary to remove the bed to do this install. If you’re planning to remove the bed anyway, then I’d try to do this at the same time. All that extra room would be awesome. 🍻

@WookieLove1

3 жыл бұрын

@@azorianification I am definitely going to remove the bed so I'll plan on doing it all together. All I need to do now is decide what shocks and spring pack I need.

@azorianification

3 жыл бұрын

Are you going to get new shocks as well?

@WookieLove1

3 жыл бұрын

@@azorianification Yes, plan is to remove the bed, assess and treat frame rust, swap shocks and leaf springs all in one big job. Just beginning to figure out what shock and spring combo I should go with.

Where did you get the ome extended U brackets? Mahalo for your time

@azorianification

2 жыл бұрын

From the shop I ordered the leaf springs. I don’t recall the brand but they had a few options for extended I bolts. Good luck 💪

Great video! I have a 2004 PreRunner that looks just like yours (except black) and I still have the original suspension, so I've been needing to replace but also want some lift. I've seen 4Runner lift videos, but they don't have the leaf springs, obviously, so I appreciate you taking time to document your work on that specifically. I am a novice "wrencher," but I think I have most of the equipment I need (except I see that I need to invest in a grinder!), so I'm hoping I can tackle this. Sorry if you mentioned it, but around how much time did this take you (without the extra time filming)? And is everything still working out well with it over a year later? Thanks!

@azorianification

2 жыл бұрын

Thanks 🍻 Definitely start spraying down the hardware long before you attempt the install. It took me about a day to do it along with recording each set of the process. They squeak once and a while. I’m thinking about buying some greaseable bolts for the front when I buy the greaseable rear shackles. Are you going to upgrade the shackles now or in the future?

@azorianification

2 жыл бұрын

Let me know how the install goes 🍻

@eljefeslash

2 жыл бұрын

@@azorianification I hadn’t even thought about the shackles until watching your install. I guess I’ll try to do that while I’m at it. What kind of grinder do you have, BTW?

@azorianification

2 жыл бұрын

It is just a cheap Ryobi.

@eljefeslash

2 жыл бұрын

@@azorianification Finally got these leaf springs installed. Still need to get the rear shocks on, then I'll take it for a drive and see how it feels. I got that front shackle bolt 3/4 of the way off (on the driver side), and it seized on me, so I had to use the angle grinder as well (totally seized on the passenger side). I didn't end up using the greaseable rear shackles, just put the old ones back on and added some silicon grease to them. I did buy the exhaust extension bracket, but it hadn't arrived by the time I did the install (just had to fidget with the tail pipe a bit). So what does that really do? I removed the stock bracket that the exhaust hangs on in preparation for installing it, but it didn't really come down any further out of the way. The only way I can see it coming down is if I release the muffler down more (which I down really want to do). Thanks, again. This video was extremely helpful!

My truck came with a factory lift, do I need to buy extended rear shocks?

@azorianification

2 жыл бұрын

Which model is your truck?

Do you have an tips for removing the top shackle bolt? Im in the middle of installing ome leafs and cant get that sucker off. Great vid thank you!

@azorianification

3 жыл бұрын

Have you soaked them in something like PB Blaster?

@joeshmoe6049

3 жыл бұрын

@@azorianification yah i soaked all the bushing in pb blaster, i was able to remove the old springs no problem but cant seem to remove the top shackle... Did yours simpy pull out with some force or did you have to hammer on the bolt to remove the rear shackle?

@joeshmoe6049

3 жыл бұрын

also thanks for the quick reply! subscribed!

@azorianification

3 жыл бұрын

I believe I had to hammer one out a little but it wasn’t too bad. Did you happen to get them off?

@joeshmoe6049

3 жыл бұрын

@@azorianification I ended up putting the old springs back on and ordering ome greasable shakles. Is it a total PITA to get the stocck upper shackle bushing out?

Just got my son a 2001 prerunner model, I have a OME kit on my 98 Xj & a BP-51 kit on my 2019 TRD. good choice! What size tires are you running in this video?

@azorianification

2 жыл бұрын

It’s a great kit. I’m running 265/75/r16. What size is he thinking about getting?

@CD-hc5ds

2 жыл бұрын

He's got some 265-70-16s right now. I believe 75s are about a inch taller, so that would probably work just right. I went with 33s on my 2019 then regeared to 4:88s & did a OV tune. This is his 1st vehicle so he needs to keep it reasonable until HE can afford to dive down a rabbit hole. LOL

@azorianification

2 жыл бұрын

Yeah the 75s looks great on a 1st gen. Does he have the rear rear leaf pack?

Hey I wanna do this on my Tacoma for towing will these be a good choice I tow about 3500 pounds regularly

@azorianification

3 жыл бұрын

I haven’t towed anything with this setup so I’m not sure how much it will effect your towing. Will the lift be an issue for what you’re currently towing?

How much were you carrying when you hold the factory springs

@azorianification

3 жыл бұрын

I would limit what I carried to only a few hundred pounds on the factory springs. You couldn’t carry much before the rear end would sag heavily

I’m doing the set up. Any update on the stock brake line? Did you have any problem? Did you have to replace them? Any links on the part you’ve used? Thanks.

@azorianification

2 жыл бұрын

The rear brake line hasn’t changed. I’m doing a front brake upgrade soon so I’ll probably purchase an extended rear line as well. I’d replace them right away to avoid damaging the stock line.

@raoulclemente1515

2 жыл бұрын

@@azorianification hope to see that video. Thanks for the fast reply, really appreciate it.

Which u bolts did you buy? And Also mine didn’t come with the black bushings it has on your springs.

@azorianification

3 жыл бұрын

Which size U Bolts?

@azorianification

3 жыл бұрын

For the black bushing do you mean the KYB bushings? Neither did mine, I had to purchase these separately. There is a link in the description on the video

Howdy, how have these aged? I've heard mixed reviews lately...

@azorianification

9 ай бұрын

So far so good. What have you heard?

Can you do more videos about it like adding weight

@azorianification

3 жыл бұрын

About how much weight it can hold?

@frankligonzalez1548

3 жыл бұрын

@@azorianification yes please

@azorianification

3 жыл бұрын

🍻

I've got an '03 with a camper shell and am considering this. Maybe I'm getting old but even after new shocks in August it seems to ride rough, and my stock springs are slightly inverted. Now that you've had some time with these how is your ride with the shell? Still better and worth doing?

@azorianification

6 ай бұрын

Which shocks did you go with? I think this was worth the upgrade. My stock leafs were bad after having this cap in the truck for years

@mlb6d9

6 ай бұрын

@@azorianification I put in Bilstein 4600's. I even have a set of those Roadmaster's as well since 2017

@azorianification

6 ай бұрын

What are road masters? Overload leaf?

@mlb6d9

6 ай бұрын

@@azorianification 'Roadactive Suspension' they're technically called. Sort of like auxilliary helper springs. After doing more research, it seems like these would not work with the new Bilstein 4600's I put on in August and would have to buy a pair of 5100's. After a few phone calls, it's sounding more and more like I'll order a custom set from Alcan in GJ Colorado and see if my brother can bring them over next time he heads to Denver. I appreciate your video, give me an understanding on installation

@azorianification

6 ай бұрын

@mlb6d9 Alcan is a good option as well. Are you raising the truck at all?

do you have a link for the u-bolts? Not seeing it in the description. Plan on doing the same setup on mine.

@azorianification

4 жыл бұрын

I purchased mine in person, but these are basically the same thing. wheelersoffroad.com/shop-by-category/wheeler-s-leaf-spring-u-bolts-for-tacoma-tundra-etc.html

@100tuech

4 жыл бұрын

How many inches of U bolts that you used for that leaf spring?

@azorianification

4 жыл бұрын

The u bolts I used were 8 1/2in

@SCWW

3 жыл бұрын

I got the heavy duty u-bolts from wheelersoffroad...

My bushings were seized on the shackles, and I had yo salvage the shackles. so I had to melt out the bushing then cut Down to the metal. Then angle ground a ridge on the metal bushing sleeve and torched the sleeve and used a flat head punch and hammered it off. Moral of the story, buy new greaseable shackles. And your video was the reason I didn’t pay to get it installed.

@azorianification

2 жыл бұрын

That sounds terrible. So after watching my video do you regret doing the job yourself? 😂

@azorianification

2 жыл бұрын

Yeah I wish I would have bought greaseable shackles when I did this install. I need to upgrade mine soon.

@connercarl2284

2 жыл бұрын

No I’m very glad I did it myself! Went extremely smoothly other then that! Just should have bought new shackles to install

@azorianification

2 жыл бұрын

Yeah I was impatient and didn’t want to wait. My plan is to get the greaseable shackles and some greaseable pins. This should cut down on any squeaking. How did you like them so far?

@connercarl2284

2 жыл бұрын

I didn’t get new shackles, and didn’t want to wait a week with the truck apart. Planning on getting them in the next few months

Wow that Tacoma is beautiful! How many miles does that beast have now?

@azorianification

2 жыл бұрын

Thanks! Should be around 185k. Do you have a 1st gen?

@jaymoar3561

2 жыл бұрын

@@azorianification those things last forever, that’s not even broken in yet! No I had a 3rd gen 4Runner with the 3.4 but sold it and got a 2nd gen Tacoma. But I always loved the 1st gens.

@azorianification

2 жыл бұрын

I also love the 1st gen. Although I just picked up an 88 4x4. I have a really fun build planned for that 🍻 What have you done to your 2nd gen?

@jaymoar3561

2 жыл бұрын

@@azorianification Oh nothing yet I just got it a couple months ago. Please do a walkaround video of your 88 pickup one day.

@azorianification

2 жыл бұрын

I’ve already started working on it. Should upload it soon! 🍻

What size U bolts did you purchase? I have 98 Tacoma pre runner that I want to lift from the rear and just not sure what’s size U bolts I’ll need to use if I install this leaf spring.

@azorianification

3 жыл бұрын

Are you planning on installed the AAL with this leaf pack?

@saulhernandez6075

3 жыл бұрын

@@azorianification I believe it already lifts 2.5 when installed so I don’t think I’ll do the AAL

@azorianification

3 жыл бұрын

Any plans to carry a lot of weight?

@azorianification

3 жыл бұрын

I purchased the OMEU53B I bolts for my kit.

gotta 03 prerunner x-cab 2.7l . put my 2880.s on this week. gonna do dakars soon. how much did your dakars settle? im gonna put my tractor forks (~250lbs) in back for 1st 300 mi. if they dont settle think ill pull the 3rd leaf out. its a ole work truck with no weight in back, some towing 5x10 tailor, and some light dirt trials. what are your thoughts?

@azorianification

3 жыл бұрын

Are you planning to lift the front at all?

@azorianification

3 жыл бұрын

Currently sits at 38 1/2 in the rear (to the bottom of the fender flare) This is with the heavy leer canopy

@mrmojorisen6336

3 жыл бұрын

@@azorianification done. i got the complete OME kit from wheelers. i put 2880's/880's up front dakar and OME nitro's in back. i was 38 3/4 in back. put tractor forks in bed, ill lesve'em for 300 mi. now without forks got 2" rake. hoping they will settle for a 1" rake, id be good with that. handle great and no more axle wrap. thanks for the reply. ill update. thanks for the vid!

@azorianification

3 жыл бұрын

Glad to hear it all worked out. Did you use stock bolts for the front of the leaf? Also did you add grease able shackles? I’m getting a little noise from the front bolt. May need to look into swapping it out for a grease able bolt.

@mrmojorisen6336

3 жыл бұрын

@@azorianification yes i did use stock bolt with white lithium grease. shackles came with the kit from wheelers. each pin has a zerk fitting that i filled after install... no squeaks so far.

What's the difference between the CS046RA and the CS046RB? From what I can tell they're the exact same

@azorianification

4 жыл бұрын

There is a different part number for each side. 🍻

@ninjadarookie

4 жыл бұрын

one is rated 200kg and one is rated 250kg, from what ive gathered you have to buy two of the same unless your springs and shocks are different which would be wierd

@SCWW

3 жыл бұрын

the reason for the different part numbers is because the are side specific to get rid of the "Tacoma lean" that is prevalent with these trucks.

What type of grease is best to use with those OME greaseable shackles?

@azorianification

3 жыл бұрын

What kind of bushings do you have?

@paultannahill5043

3 жыл бұрын

@@azorianification OME polymer

So you still recommend this set up? It looks amazing.

@azorianification

2 жыл бұрын

I would. My only suggestion would be to purchase greaseable bolts for the front, and greaseable shackles for the rear. The bushings get really noisy sometimes. I’m going to swap these out but it would have been much easier to do when I installed the leaf pack. Otherwise I love this setup.

@mujtaballa3105

2 жыл бұрын

@@azorianification thanks! I will note that. Also, I read where the axle is a smidge In the front meaning it’s off center after the Dakars. I read people drilled other holes and it really puzzled Me. I can install just right out the box, right?

@azorianification

2 жыл бұрын

That is what I did. Maybe it is but you’d have to measure it before and after to notice. I’ll have the next video up soon on my latest upgrade

@mujtaballa3105

Жыл бұрын

@@azorianification has the ome 881 settled more up front??

Are the leaf springs a 2.25 lift?

@azorianification

Ай бұрын

Yes. I’m not sure if you get an additional lift with an AAL. I’m just using the standard leaf pack

On a scale of 1-10 (novice to professional mechanic), what skill level do you think this would be at? Wanting to do a self-install like this on my 2000.

@azorianification

4 жыл бұрын

I’d say a 3-4. If you have someone that can give you a hand it’s pretty easy. The hardest part was having to deal with seized hardware. Have you ever worked on suspension before?

@davypeep

4 жыл бұрын

@@azorianification I haven't but I'd say I'm about a 3, I should be able to do this once I get stands

@azorianification

4 жыл бұрын

Sounds like you’ll be able to do it 🍻Do you have to deal with a lot of rust in your area? How does the hardware look?

@davypeep

4 жыл бұрын

@@azorianification nope, the taco has been in central and North Texas all its life, just that normal surface rust. Very good frame!

@azorianification

4 жыл бұрын

Perfect! Well here’s to hoping you don’t have any seized bolts 🙏

That fill bolt on your rear differential looks scary ! I just tried tackling mine today, now I’m in search of a new fill bolt !🤨

@azorianification

3 жыл бұрын

Scary in what way? We’re you able to remove yours?

@kennethg374

3 жыл бұрын

@@azorianification from your video it looked rusted, may have just been dirty ? No, I didn’t get mine to budge, rounded off the edges. 😞

@azorianification

3 жыл бұрын

Ive gotten mine off before so it might just be surface rust. I need to do a fluid change soon so we’ll see.

@azorianification

3 жыл бұрын

How are you going to try to get it off?

@kennethg374

3 жыл бұрын

@@azorianification going to get a bolt extractor kit, just need to get a new bolt before I try. Hopefully that will work.🤞

What shell/rack system do you have that can hold the tent?

@azorianification

3 жыл бұрын

The canopy is a LEER and the rack system is Yakima. This setup supports 200lbs static, and 150lbs of dynamic weight. 1000s of miles with the setup and no issues so far. Eventually I may upgrade this setup to allow for even more weight. 🍻

@albertludwig5188

3 жыл бұрын

Daily Night Society awesome thank you!

@azorianification

3 жыл бұрын

🍻

Reminder to everyone, check the u-bolt nuts to ensure they didn't loosen up after driving the truck for about 50 miles.

@azorianification

Жыл бұрын

Very good advice. 🍻

@tylerdurden6937

Жыл бұрын

@@azorianification Ask me how I know to check :D

@azorianification

Жыл бұрын

Oh no. Did your axle move?

@tylerdurden6937

Жыл бұрын

@@azorianification Didn't move, but I lost one nut on each side of the axle. Ended up buying additional nuts and doubling up on everything after that, scary.

@azorianification

Жыл бұрын

That is terrifying. Did you torque them down properly when they were installed??

What did you do for the rear brake cable hitting the shocks

@azorianification

3 жыл бұрын

The e brake or the brake line?

@codysweeney4610

Жыл бұрын

Curious on what you did with the ebrake cable mines hitting my leafs

@azorianification

Жыл бұрын

After you have the truck back on the ground?

What size grinder disc did you get to cut the bushing? Seems like It barely fits in between there.

@azorianification

Жыл бұрын

I believe it was a 4in disc

@pauloramirez8216

Жыл бұрын

@azorianification any chance you know the thickness. I'm sorry for asking 😆 I just don't want to be stuck with not having the necessary tool 😅

@azorianification

Жыл бұрын

Just the regular thickness. I bought a pack at Home Depot

@azorianification

Жыл бұрын

What brand suspension are you installing

@pauloramirez8216

Жыл бұрын

@azorianification I got the ome nitro shocks with the ome 881 coils. It was a whole kit I got online. It also brings greasable shackles.

More or less how much did all this cost? Also will this set up work on a prerunner as well?

@azorianification

3 жыл бұрын

For the setup I did on my truck? Yours is also a prerunner and not just the normal 2wd model?

@dflo1115

3 жыл бұрын

@@azorianification no mine is 2wd

@azorianification

3 жыл бұрын

You’d have to check with the manufacturer to make sure this setup works on your truck. If I remember correctly I spent under $1k for everything

Where did you bought it the rear lift from which site?

@azorianification

3 жыл бұрын

From a local overland company near me. If you’re ordering online you have a bunch of options

@azorianification

3 жыл бұрын

Where are you located?

Did it make the truck taller

@azorianification

3 жыл бұрын

Yes, this setup will give you a 3in lift.

What rims do you have on there?

@azorianification

2 жыл бұрын

In this video I have the stock 2001 wheels. Currently I have the Method703s

Has the leaf pack settled anymore after two years?

@azorianification

2 жыл бұрын

8/7 - the front is sitting at 39” up to the bottom of the fender, the rear is at 38 1/4” to the bottom of the rear fender.

@joeb2121

2 жыл бұрын

@@azorianification weird, I put a set of 5100 with the ome 881 and I'm only at 37 in the front.

@azorianification

2 жыл бұрын

Prerunner. Haven’t gotten everything to complete my 4x4 swap. That would be my guess

How was the overall ride quality after installing?

@azorianification

2 жыл бұрын

Overall it was a big improvement but keep in mind the stock suspension was overdue to be replaced. It was stiffer than stock in a good way. I still haven’t added the extra leaf to the leaf packs

@azorianification

2 жыл бұрын

Are you considering the same setup?

Why is the driver side 200kg and the passenger side is 250 kg should they not be the same can somebody answer that question for me

@azorianification

3 жыл бұрын

I would assume this would be to keep the truck level. One side my need to compensate for additional weight.

@jwatkins9520

Жыл бұрын

The way I understand it is the driver weight and gas tank being on the driver side is the reason for the additional support.

Bro im doing the same lift set up but worried they gave me the wrong rear shocks for this set up whats the part number on your rear shocks ome

@azorianification

3 жыл бұрын

I’ll check. What part number do you have?

@cray7139

3 жыл бұрын

@@azorianification My rear is 60065 and fronts are 90004 installed the rear 2day idk they fit so fuck it lol seems tall asf tho...

@cray7139

3 жыл бұрын

@ Daily Night Society Whats up bro so finished my install i noticed it sets higher on the passenger side like half in higher does your lean??

@azorianification

3 жыл бұрын

In the rear?

@cray7139

3 жыл бұрын

@@azorianification More in the rear but front also. called arb only the leaf springs are directional heard Tacoma's lean on the driver side cus battery fuel tank idk said the have a spacer washer for the front strut driver side .5mm should fix the lean seen someone online do it to a 2nd gen taco

What kinda of lift up front?

@azorianification

2 жыл бұрын

OME struts and 881 springs for about a 3in lift. Are you doing a lift soon?

what was the final lift in the rear after your put some miles on the truck?

@azorianification

3 жыл бұрын

Since the rear leafs on my truck were sagging really bad, I’m not sure how much I actually gained over stock. Visually it was a huge change. To give you a better example, with the heavy canopy installed, the rear is about 38 1/2 measured from the ground to the bottom of the plastic fender flare. Stock wheels and tires

@vtec73

3 жыл бұрын

@@azorianification thats about a 3inch lift. i just bought a set of the same leaf springs. they said those are only about 2.25 lift. i didn't want anything over 2.5 on my truck.

@azorianification

3 жыл бұрын

Are you planning to raise the front?

@vtec73

3 жыл бұрын

@@azorianification yes. i bought the whole ome kit. gonna run the 881 springs in the front. thinking about switching to 880 since i'm not running the after bumper or winch.

@azorianification

3 жыл бұрын

I think you’re going to love the setup once it’s installed. The lift looks great with the stock wheel/tire size and gives you the option to upgrade to a bigger wheel if you want to. The ride quality is also an improvement. Looking forward to hearing what you think about it once everything is installed 🍻

Can you pls do a vid on how much weight it can hold

@azorianification

3 жыл бұрын

The Dakar leaf pack?

@SCWW

3 жыл бұрын

It doesn't change the payload weight for the truck. As i've read in several places, the payload is set by the factory and cannot be changed. However, what a leaf spring upgrade does do is allows you to load your pickup with 400 lbs of camping gear or whatever without any sag, like the stock springs pictures in the beginning of this video. I did the OME full leaf pack upgrade to my '98 Taco thinking it would increase my payload, instead it lifted my rear significantly, and created a condition where i have no sag in any load situation and quite a bit of rake when empty. Also, as @Yo Boo said above, the more weight it's carrying the better it rides, but only after changing out my shocks as well.

@azorianification

3 жыл бұрын

Did you do the AAL?

@SCWW

3 жыл бұрын

Daily Night Society I got the heaviest leaf pack with the option of the extra leaf, I don’t know if that’s the AAL, but it sure did raise the truck a lot. Interesting note though, I didn’t do anything with the brake lines except bent the cable guide slightly so that it wasn’t rubbing on the springs. That being said, I didn’t actually drop the axle all the way off like it looks like you did. I did the spring swap while the bed of the truck was off, so I’m not sure if that made a difference as far as the brake lines were concerned, though it sure made a huge difference with accessibility.

@azorianification

3 жыл бұрын

How much height did it raise the rear of the truck?

Where are you located in Washington?

@azorianification

2 жыл бұрын

Coastal Washington. You?

just curious why did you buy two different weighted springs?

@azorianification

4 жыл бұрын

What do you mean? Because they have different part numbers?

@ninjadarookie

4 жыл бұрын

@@azorianification yes exactly

@azorianification

4 жыл бұрын

The Dakar lead springs are side-specific. CS046RA should be installed on the left hand (driver's) side of the vehicle. CS046RB should be installed on the right hand (passenger)

@ninjadarookie

4 жыл бұрын

@@azorianification your 100 percent right thanks for clarifying. hey do you like the springs? would you say that its money well spent?

@azorianification

4 жыл бұрын

No problem. As for the springs they were worth every penny as far as I was concerned. I usually carry a little more weight in the back when I go out and these have helped out a ton. They feel great on the road with the extra weight or not. I don’t have any personal experience with any other brands so keep that in mind. What other brands are you considering?

So basically this gave you like 3 inches of lift?

@azorianification

4 жыл бұрын

Correct. 🍻

How would compare your daily driving ride experience?

@azorianification

3 жыл бұрын

The ride quality is improved overall. It is a little firmer compared to the stock suspension. Keep in mind I went from Oem suspension with 160k to brand new aftermarket. Are you looking at the same setup?

@Giustified

3 жыл бұрын

@@azorianification Yep. 2001 Double w/148k. Still OEM. time to update to an overland rig.

@azorianification

3 жыл бұрын

I don’t know how it compare to other setups but for me it was the perfect balance between a daily driver and overland driving. I know there is a more capable setup but this is also my daily.

@Giustified

3 жыл бұрын

@@azorianification That's what i wanted to hear.

@azorianification

3 жыл бұрын

Are you also doing the AAL?

You should paint your frame with POR 15.

@azorianification

3 жыл бұрын

That’s not a bad idea. We don’t have to deal with salt on our roads but it would offer more protection. Did you coat yours?

@scottkailey1

3 жыл бұрын

@@azorianification yes sir and and I have a 360 degree nozzle that I use to spray fluid film on the inside. I do have to deal with road salt though.

@azorianification

3 жыл бұрын

That’s awesome. This also works with POr15?

@scottkailey1

3 жыл бұрын

@@azorianification nope unfortunately por 15 it to thick. But I spray the fluid film every fall.

@azorianification

3 жыл бұрын

Does the fluid film last all winter?

What’s the Mileage on your Tacoma now?

@azorianification

Жыл бұрын

201k! Yours?

@TheShowtime85

Жыл бұрын

@@azorianification too many friend.

@azorianification

Жыл бұрын

It will run forever! 🍻

@TheShowtime85

Жыл бұрын

@@azorianification let’s hope, I’m at 300k plus

@azorianification

Жыл бұрын

🍻 to another 200k!

Just get another rear brake hose. It will thread right into the old one and you’ll gain a lot more length than from using a “long” one that’s only a few inches longer.

@azorianification

4 жыл бұрын

Yeah I’ll need to do that soon 🍻

How do you like those 881 coils ? Heard they’re super rough? Thanks !

@azorianification

3 жыл бұрын

They feel stiffer than the stock springs but overall it’s an improvement in ride quality.

@darknessfalls714

3 жыл бұрын

@@azorianification thank you, wanted to hear this before I made the purchase.

@azorianification

3 жыл бұрын

Good luck with the install. Let me know how it went.

Check the torque spec for your rig before you break anything.

@azorianification

3 жыл бұрын

🍻