No video
Toyota Tacoma Gen 2 (2005-2015) Interior light LED Conversion // A must mod and it's EASY to do!
How to convert your interior OEM incandescent bulb to modern LED lights.
Generation 2 (2005-2015) - 2007 Toyota Tacoma shown in video.
Sometimes it's just a lucky guess on what LED's to purchase but these seems to be just right for the application and its relatively easy to swap out.
A dramatic improvement! Perfect for camping and Overlanding. This really helps seeing inside the cab! LED's also draw a fraction of the power of incandescent bulbs!
MAP Light: amzn.to/3IAH6up
DOOR Light: amzn.to/3PnOoDX
Body Trim Removal Tools: amzn.to/3P7U3OP
Disclaimer: Some of this links go to my website and some are affiliate links where I’ll earn a small commission if you make a purchase at no additional cost to you.
Пікірлер: 45
Straight to the point, thank you. I changed my OEM dome light to the MESO Customs. It took me longer to find a tool.
@MikeFreda
Ай бұрын
Thanks for the comment! Cheers.
Don’t forget that LED lights only work in one direction. If you install a light and it doesn’t work try swapping orientation
@Luke-do1ek
Жыл бұрын
Thank u!! Lol saved me from some awkwardness
Just did mine. Thanks for making the video and taking the guesswork on where to pry. I had to pry both sides of the map light bulb contacts/clips closer to the center as the old bulb was wider and fatter. First time I installed it the new LED it just fell out. Otherwise, simple mod with dramatic difference in brightness.
Thanks for the guide. Direct and to the point.
thanks - great video!
@MikeFreda
Жыл бұрын
You’re welcome. Thanks for commenting. Cheers!
Thanks! I tried it and they are super bright haha and the trim kit is nice to have too
Thanks for the info !! I wasn’t sure how to do the map lights. !!
@MikeFreda
Жыл бұрын
Glad I could help! Cheers
Thank you!
@MikeFreda
8 ай бұрын
You're welcome!
Great video and demonstration, thanks
Okay, I just changed these out... These little bulbs are a pain in the ass to get out due to such a tight area to work with. Tried the blue tape cushion on the needle nose pliers. NOPE ADD DID NOT WORK. Take off the latex gloves as they do not work well with duct tape. Go ahead and back wrap the needle nose plies with strong duck tape. Grab a hold of the bulb firmly without breaking the bulb and wait a second( 1, 2 and 3) and yank it out. Worked perfect with the glue action on the duct tape. Reapply the gloves for installation of the LED bulbs... Lesson learned!
@vincedumayas2334
3 жыл бұрын
Wow thanks a lot! Worked out real well for me. Was about to give up till i saw ur comment :)
To pull out the map lights you can just wrap a piece of tape(sticky side around the light) and just pull it out that way.
Excellent video, thank you
@MikeFreda
3 жыл бұрын
Thank you and you’re welcome.
Thank you been looking to replace my other led lights someone put blue ones in and have been driving me nuts.😁😁
@MikeFreda
Жыл бұрын
Glad I could help. Cheers.
Thanks, so simple
Hey, nice video. I found I was able to get a thin flathead screwdriver and pry the back of the bulb down for the map lights. Do you have LEDs for the sunshade mirror lights? looking to upgrade those as well
@MikeFreda
3 жыл бұрын
Thanks. Glad it worked out for you. No, I did not touch the visor light.
Thank you thank you so much for your help
Any issues with fuses popping?
@MikeFreda
5 ай бұрын
No, never. These LED’s draw less current but they do get a bit hotter. Cheers.
Why is there no “door” option for the front of the truck? Only the back. Makes no sense and bothers me in my truck lol
Thanks 🙏🏻
@MikeFreda
2 жыл бұрын
You’re welcome.
Nice 60!
@MikeFreda
3 жыл бұрын
Thanks. The never ending project. lol I’m currently in the process of rebuilding the engine.
@84runner
3 жыл бұрын
@@MikeFreda I have a 78 fj40. Runs well, fairly clean. Putting Signaw PS on currently! It's not a rock crawler, but it's not a $50k+ vehicle either! Enjoy your 60, and thx for the led advice for my Tacoma!
Does the LED dome light slowly dim-to-off after you have exited the vehicle? Most LED lights dim very poorly and shut off completely partway. The slow dim to off feature gives the truck a more high-end feel, or at least relative to a 2005 model year.
@MikeFreda
11 ай бұрын
Thanks for commenting. Surprisingly enough, the main LED door light does dim on and off. There is a bit of flicker but it’s not an instant on and off. Cheers.
As an ex drug addict, that light cover would’ve been a perfect hiding spot
@MikeFreda
Ай бұрын
Oh, okay. That good to know. Cheers.
Any idea why my newly installed LED dome light will only come on while the key is in the ignition? Light wont come on during entry until key is inserted. Tried flipping direction of install, no change. 1st gen tacoma
@MikeFreda
2 жыл бұрын
No clue why. That is really odd. I would have to look at the schematic to see how its wired. Either there isn't enough current flow to trigger that part of the circuit or there is a grounding/backfeed issues when the key is not in. Does it work properly with a normal incandescent bulb?
@robertmilley5070
2 жыл бұрын
@@MikeFreda yes , put in the old bulb, works fine
@MikeFreda
2 жыл бұрын
Some LED bulbs are built in a way that they measure the same resistance and draw the same current as regular bulb so they work properly. I suspect that may be the issue here. The bulb you have may not compatible with the standby circuit. I had one that was stayed slightly on all the time. Not clue why.
What about the vanity lights
@MikeFreda
2 жыл бұрын
Unfortunately, I can’t help you there, my Tacoma doesn’t have vanity lights. That being said, I’m sure the area pops out and you can see what bulb is in there and find the LED equivalent.
i think the map light and door light links are the same can you update the links i wanna buy both lights for my truck
@MikeFreda
4 жыл бұрын
Yes, you are correct. Link fixed. Thanks for catching that!