when you removed the right knob the tiny metal spacer was still attached.... remove it and it will sit like the rest of them. you're welcome.

Thank you for the video and instructions. I replaced my Climate Control bulbs and knobs yesterday and they are a 100% improvement. The replacement went as pictured in the video. Very much appreciated.

My 07 Tacoma is about to hit 300K miles. I’ve had to replace the resistor once due to this issue after getting tired of reaching down under the passenger side to wiggle the wires to get the ac to work in slower speeds. I’m about to replace both light bulbs from the panel like you just did and likely ordering the knobs as well. Everyone tells me to get a new truck already but I just can’t part ways with my old truck, it’s been so good to me after years of abuse.

Just replaced my blower last night. It’s the blower motor. Only worked on high. Now it works on all settings.

@mongoose1able

5 ай бұрын

Check a small module resistor with 4 wire plug for the AC blowermotor speed selector switch.

Upgraded nobs Change the entire Look and man that looks good

If off or high are the only options Then the Blower motor Resistor Went bad It's a common issue on all vehicles when nothing but high works 6:00

@CanadianGearhead

11 ай бұрын

Yup, it's pretty well documented in the community it looks like

Taco Time, good work!

The cable is usually fried i rewired mine and works perfectly fine now ac on all settings

This video was great, I want that touch screen😭

Great video , thanks for the hints , I had that problem .

I had the same problem with my fan speed and I'm pretty sure it was a resistor.

The pins are loose inside the Blower motor resistor they get extremely hot which is why there in inside the Blower Box

Can you give more info on those knobs? Very informative video..

@CanadianGearhead

11 ай бұрын

These are the knobs: www.auxito.com/products/ac-climate-control-switch-tacoma-models?variant=43521300300020 Using code GEARHEAD will get you 15% off!

@edwardbell4928

9 ай бұрын

These knobs do have a tendency to have the end cap pop off after a time...a little glue fixes it right up

I messed around with my radio and now it turns on but no sound. Did I accidentally pull out a wire? If so do you know which one?

This is good info bud I've seen other vehicles where that larger one is usually the temperature turn knob maybe 🤷‍♂️

@CanadianGearhead

11 ай бұрын

I checked and it looks like the 3 knobs are the same, the peg on the right side one sticks out more and the OEM knob must have accounted for that

How many miles on your Tacoma when the resister started to fail? I ask because I just bought a "15 Sport with only 7k miles on it.

Can you send a link for the bulbs and controls?

Thanks, I placed an order.

That pry tool? Never seen one before, where can that be found?

@Jimbobbuddy

2 ай бұрын

Amazon

I did this on my truck like 3 years ago. I replaced it with blue lights, and the same nobs

@CanadianGearhead

11 ай бұрын

Did your knobs fit the same way as mine do?

@jesuscisneros2555

11 ай бұрын

@CanadianGearhead yes they did perfectly I can see blue light in the clear ring and awesome bihinde the nob ...I like the way they look.......and I replace the resistance under the dashboard because my AC stops working was way to easy to do it.....Amazon products...😊

@casen06

6 ай бұрын

​@@jesuscisneros2555link to blue bulbs ?

Wanna send me 2 of those bulbs lol

Hello Tim, do you know if it's possible to have that style of knob (or anything else really!) on a 4th gen 4runner?

@CanadianGearhead

9 ай бұрын

The 4runner has push buttons rather than knobs so I don't know of any upgrades for it

@nicolascharlery8323

9 ай бұрын

@@CanadianGearhead I was thinking more of the entire unit replaced instead of just a button swap Too bad that does exist, that would be just awesome! Thanks ;)

The resistor will burn up and I found it's better to change it out for about $30.