My shop > www.amazon.com/shop/classytacos Thanks for watching! Hit that subscribe button to stay up to date on all my videos!

@mauricioarriola1360

3 жыл бұрын

Son of gun... your the first person I e seen online or in person to have the same rims as me. Lol I fuckin love these wheels good choice!

@ClassyTacos

3 жыл бұрын

@@mauricioarriola1360 Great taste I see you have. Thanks for watching.

Just wanted to hop on here and thank you for the helpful videos that have helped me install some parts on my 2017 Tacoma keep it up man !! Keep up the hard work and consistency and success will come !!

@ClassyTacos

3 жыл бұрын

Thank you so much, I really appreciate it. Let me know if there is anything you want to see more of or want a video of. Thanks again.

the trimming job was actually pretty good. and I really like that you didn't hack 1/2 the damn fender off like some of these fools do her on you tube...

@ClassyTacos

3 жыл бұрын

Thanks for watching. Ya, I like the stock, modified look. I do not want to chop off half the fender.

Good job. Really like the new wheels and tires!

@ClassyTacos

3 жыл бұрын

Thank you.

Super clean work, bro. Rig looks siiiiick

@ClassyTacos

2 жыл бұрын

Appreciate it! Thank you.

I’m jealous of your garage! And your truck looks killer man.

@ClassyTacos

3 жыл бұрын

Thank you, I recently did a garage make over. It is my favorite room in the house. Thanks for watching.

Just what I needed to see, these new 35s are sweet but they are mcrubbin. Thanks for another great video!

@ClassyTacos

2 жыл бұрын

Thank you 🙏

Nice video - good channel , super underrated

@ClassyTacos

3 жыл бұрын

Thank you and thanks for watching.

Nice work bro, I’m going to do the same thing this weekend. This video help me out

@ClassyTacos

2 жыл бұрын

Thank you, hope it all goes well.

Nice video awesome truck bro, just got some 285/75/16s toyos on my tacoma and yes its rubbing alot, good think i found your channel and this video ima try it and hope it stop rubbing thanks man!!

@ClassyTacos

2 жыл бұрын

Thanks for watching, good luck with the trimming.

@snowisfun2

7 ай бұрын

I am having the same issues. Did doing this cut help you fit those 285/75/16s?

Just popped in to say your wheels are dope

@ClassyTacos

2 жыл бұрын

Thanks man. 👍

Good work my friend 😎👍

@ClassyTacos

3 жыл бұрын

Thanks Bub.

Those wheels look great on your truck👍

@ClassyTacos

Жыл бұрын

Thank you, appreciate it.

Thanks Brother needed that lol I got the same problem 💯

@ClassyTacos

9 ай бұрын

Any time, thanks for watching.

Just slapped mine on yesterday! Bout to do this trim tomorrow

@ClassyTacos

2 жыл бұрын

Awesome, hope it all works out well.

I just put on 255/85/16 Toyo mud terrains and when I turn and hit a dip , I think I'm hitting in that same spot (left turns, left side and right turn right side). Thanks for the video. You make the job less scary to try my self.

@ClassyTacos

6 ай бұрын

Any time, thanks for watching.

Nice work man. I might have to do this eventually!

@ClassyTacos

3 жыл бұрын

Thank you. It was fairly easy, just take your time.

Looks good brotha!

@ClassyTacos

3 жыл бұрын

Thanks for watching.

You have a nice clean shop

@ClassyTacos

2 жыл бұрын

Thank you for the kind words.

Beautiful Garage

@ClassyTacos

3 жыл бұрын

Thank you.

Nice work, like your presentation.

@ClassyTacos

3 жыл бұрын

Thank you very much, I'm still learning. Not very professional.

@bryanstuckey1870

3 жыл бұрын

@@ClassyTacos Sorry to disagree, I think your videos are quite professional & well thought out & produced.

@ClassyTacos

3 жыл бұрын

@@bryanstuckey1870 Thank you very much. I really appreciate the kind words.

Great job! I’m rubbing in the same exact spot and need to do this. But I don’t want it to look like a hack job 😅

@ClassyTacos

Жыл бұрын

Thanks for watching.

That a lot of work for 295, I’m running 305/70/17 basic cmc barley trim anything fit perfectly and no rubbing…you did more work than I did

@ClassyTacos

2 жыл бұрын

Do you regularly go off road? If you stay on the pavement then ya you're good. If you take it off road you will be rubbing all over the place.

the best part is how you talk about the lift you did to fit these tires, Oh wait you didn't

@ClassyTacos

2 ай бұрын

That’s cause lifts do almost nothing to fit tires. At least know what you’re talking about before you start talking shit. That way other men will start to take you seriously. Thanks for watching.

Good stuff! I can't believe these Fuel wheels have a +1 offset. I thought for sure they were the -12 offset option. I guess the combination of 17x9 wheels and the tire size gives the stance a nice poke.

@ClassyTacos

3 жыл бұрын

I’m running negative 12 on the truck not the plus ones. Most people run the negative 12s. I put up the plus ones as it will help with less trimming. Thanks for watching.

@joluar78

3 жыл бұрын

@@ClassyTacos thanks for the quick response and glad I’m not going crazy.

Man....I need that Dremel too.

@ClassyTacos

3 жыл бұрын

It works so good! Thanks for watching.

When I went from my stock 265/17s up to 285 Mud Terrains from General Grabber, my mpg's dropped by 5, still won't go back through. I like the stabillity from unsprung weight, corners planted. My tires are noise-y though, so I might look for something with less road noise next like an AT tire. You may want to close that gap between the fender liner and body. You don't want dirt and muck going in there.

@ClassyTacos

3 жыл бұрын

Ya, you right. I will probably do that in the future.

@alexs825

2 жыл бұрын

I think you’re wrong. 5 mpg is too much. You’re comparing what the truck reads right? Well your larger tires you go further than your truck thinks you’re going. Do the math it should only be 1-2 mpg in reality

@joyoptimal6286

2 жыл бұрын

@@alexs825 I drive fast and is a little heavy on the gas pedal. I have ECT always ON too. I do only average 14.5mpg. I spent $400~ $450 on gas/month. Lately, I’m thinking of getting a second electric vehicle for daily commute. Maybe a Tesla 3 or model Y and not use the truck. It’s paid off anyway.

Hey man, great vids. Question: I have a 2in lift, Toytec Aluma 2.5s, I will be running 285/75/R16, I got the cab mount chop done, but do I need to do all the cutting you did on the fender as well as all the cutting you did on your viper cut video? Or do you think minor cutting will do it? thank you sir

@ClassyTacos

2 жыл бұрын

You could start with minor and then work into more cutting depending on how much time you spend off road. If the truck strictly stays on pavement, its minor cutting. Any off-roading will require more cutting as the suspension cycles it will hit. Thanks for watching.

Thanks for posting this information. I'm looking to run a similar setup. wheel spacers to avoid hitting the upper control arms? How much lift do you have on that truck? What is the offset on those Wheels?

@ClassyTacos

2 жыл бұрын

I ran wheel spacers for a little, plan on more trimming with spacers. Lift is sitting right under 4 inches. Those wheels where -12 offset. Thanks for watching.

I'm curious if you adjusted caster any to move the wheel forward away from the body mount before trimming...

@ClassyTacos

10 ай бұрын

Yes, as much as possible. This video is older. Currently running a 333 Fabrication cam eliminator kit with DK cam tabs, maxed caster. Thanks for watching.

Good video! I'm about to do mine for 305/70r16 so this helps. What did you do for the area in front of the tire? I'm gonna try to mold it with a heat gun before maybe cutting the liner and lower bumper.

@ClassyTacos

3 жыл бұрын

I have mine cut to make way for the aftermarket bumper, what is left of the inner fender in the front is pushed forward and bolted into existing holes on the lower section of the factory bumper. If you look from underneath you will see the holes for the bolts in the plastic. Good luck.

@TimmyG2011

3 жыл бұрын

@@ClassyTacos Thanks for the reply.

@Lobo1604

3 жыл бұрын

@@TimmyG2011 you should be fine with just molding it. I molded the front to fit my 35s Toyo MTs. I do not rub up front and ive been off roading to cleghorn, sandstone canyon etc

Nice wheels bro. I just bought some Kicker 6 with Toyo R/Ts. Where did you get that bug deflector? Brand or link?

@ClassyTacos

3 жыл бұрын

Here is the link, Auto Ventshade Aeroskin Deflector-- @t​ Thanks for watching.

Having a tough time deciding on 295/75/16 or 285/75/16.. ive got a cmc done and may have to do this trim if i go with the 295s . How was it wheeling after this cut still rubbing?

@ClassyTacos

3 жыл бұрын

Yes, still rubbing on deep holes once I get to the bottom and start going up. Thanks for watching.

How smooth is your ride with that much preload? I have the same set up but with dirt king uppers and deavers in the rear and on road it’s pretty bouncy with just one inch of preload. Thanks!

@ClassyTacos

2 жыл бұрын

To me it’s fine. Not stiff at all and not bouncy. I came from an XJ with long arms. I think the it drives like a freaking dream.

Howzit Bradda , So hows da 35's been. Any big issues. Maybe off roading ? Putting 33's on my 08' did all the mods but those 35's Damn !!! Just wondering. Mahalo for da Vids Bra 🤙🏽

@ClassyTacos

6 ай бұрын

The 35s were great no real issues with my set up. Currently running 37s which required a lot more work. Thanks for watching.

Looks awesome!!! What offset are the wheels?

@ClassyTacos

2 жыл бұрын

Thank you, they are -12.

So I got a 3.5 inch lift. I’m having trouble deciding between 285 or 295 geolandar. Would I clear 295s?

@ClassyTacos

Жыл бұрын

No, nothing is going to clear without some rubbing. You will be cutting and grinding. If you go off road it will need more cutting and grinding. If you stay on the pavement there will be less modification to the wells. Thanks for watching.

Hows the throttle response or pull now that you got taller tires, think theres a gear change in the future?

@ClassyTacos

2 жыл бұрын

I have 5.29 gears, lockers and a KDMax Pro tune on 35s now. It drives like a freaking dream.

What if I have a 6inch lift. Do I need to do some cutting if I run 295/70/17

@ClassyTacos

2 жыл бұрын

If you off road, yes. You may be able to get away with no cutting is its pavement only. Don't cut anything until you have the set up installed and dialed in. That way you can fine tune the cuts to fit.

Are 295/75/r16 tough to fit???? 2.5-3inch lift 1.5 rear??!? Help

@ClassyTacos

2 ай бұрын

They will need trimming to fit correctly.

Have you had any issues with the plastic since you heated them up. Have they stayed in place?

@ClassyTacos

3 жыл бұрын

They have stayed in place kind of well. If I get the tire pushed into it on the trails it does move them around. I just shove them back in. I’m thinking about trimming more.

I’m thinking of upgrading my tires to a larger more aggressive tire I’m told I can go as high as 32 1/2 without having to cut into the frame . A question I have for you since you upgraded your tires what’s the largest tire you can put under your vehicle in the spare tire section if you know would love to know?

@ClassyTacos

3 жыл бұрын

I have read on the forums people stuffing a 33 in the stock spare location. It will take a little fab work. There are some metal brackets/ ears that position the spare which would have to be removed. Thanks for watching.

@russellwood8750

3 жыл бұрын

@@ClassyTacos thank you very much for the info much appreciate

@ClassyTacos

3 жыл бұрын

@@russellwood8750 No worries, any time.

How bad was the cab mount chop to do time wise?

@ClassyTacos

8 ай бұрын

It’s super quick, less than an hour for both. The cutting takes the longest.

Have you done any other supporting mods like a diff drop or needle bearing? how do you like the long travel?

@ClassyTacos

3 жыл бұрын

No diff drop or needle bearing. The plan here was always a re gear and selectables from ECGS so the needle bearing will be done at that time. I do not have a long arm set up. It's a mid travel suspension on stock length axles. Thanks for watching.

@95tman

3 жыл бұрын

@@ClassyTacos and you haven’t had any issues with the needle bearing yet?

@ClassyTacos

3 жыл бұрын

@@95tman Not yet, I will say both my axles have a decent amount of wiggle at the diff side.

Do you have a Link for your Rock Sliders? Thank you

@ClassyTacos

Жыл бұрын

I have an install here -- kzread.info/dash/bejne/o3agvJRuqbbAgLg.html

Have you had any negative side effects from doing the cab mount chop? Im ready to do mine and just wanna make sure i dont run into any unforseen issues. thanks.

@ClassyTacos

3 жыл бұрын

Nothing has come up, no issues. Thanks for watching.

@sdgmaestas2741

3 жыл бұрын

@@ClassyTacos thanks bro! the taco looks great! Im gonna run 295 70 17S on my 2018. Your videos gave my confidence to move forward with the cmc.

@ClassyTacos

3 жыл бұрын

@@sdgmaestas2741 Thank you, I hope it all works out for you. Depending on how much and where you wheel. You might need to do some more cutting to the fender flares and inner line here and there. I appreciate the kind words.

Did you find it necessary to re gear with 295?

@ClassyTacos

Жыл бұрын

I'm a yes, but it is subjective. You could always pick up the 295s with plans for the future to re gear. See how it feels, then decide after a bit. The gears will help move the truck from a stand still, makes it feel easier, lighter, quicker. Thanks for watching.

Do a traction bar mod next @Classy Taco

@ClassyTacos

3 жыл бұрын

We will see.

@joyoptimal6286

3 жыл бұрын

It will help with the Axle wrap when if you accelerate hard or when you lift your truck. See here to see tacoma Axle wrap even in stock form: kzread.info/dash/bejne/pZWXlMyJacysgcY.html

@ClassyTacos

3 жыл бұрын

@@joyoptimal6286 Nice thanks for the link. I will look into it.

Bro, I need some help. I installed 295/70/17 with -38 offset and I run on my CMC on one side ? what could this possibly be ? :/

@ClassyTacos

2 ай бұрын

That -38 is a killer. You will need to check your caster, make sure it’s maxed. Go get an alignment at a shop that deals with lifted trucks. Tell them you need the max caster. Good luck. There is always more cutting and pounding with a sledge hammer.

@osamaabdelgader9426

2 ай бұрын

@@ClassyTacos Thanks man, someone else told me the same thing. I dont mine cutting like you did or the viper cut.

@ClassyTacos

2 ай бұрын

@@osamaabdelgader9426 You got this, it;s alot of trial and error.

Yo! Did it end up working? No rub?

@ClassyTacos

5 ай бұрын

It worked perfectly. Thanks for watching.

How much work to fit 295 did it rub after this off-road?!?!?

@ClassyTacos

2 ай бұрын

Nope, no rub after this work. Thanks for watching.

@paulthompson661

2 ай бұрын

Thankyou so much!!! I’m buying 295/75/r16 which are a little smaller than 295/70r17

@ClassyTacos

2 ай бұрын

@@paulthompson661 No worries, anytime.

What wheels are those?

@ClassyTacos

6 ай бұрын

Those were Fuel D6 Kickers.

Isn't that plastic meant to protect from rust?

@ClassyTacos

Жыл бұрын

Plastic will not protect form rust. Thanks for watching.

Lol whats that sound at the beginning of your video ?

@ClassyTacos

Жыл бұрын

Just me, trying to be funny. I failed. Thanks for watching.

@thumperbangin2000

Жыл бұрын

@@ClassyTacos came across your video because im looking at buying 285 75 16 for my taco and trying to decide. Geolander mt vs ST Maxx .. geolanders are the cheapest price on them all.

@ClassyTacos

Жыл бұрын

@@thumperbangin2000 The Geos have been the best MT I have ever run. They have held up well.

What size lift do you have just wondering?

@ClassyTacos

Жыл бұрын

I’m a little under 4inches.

@ClassyTacos

Жыл бұрын

I’m a little under 4 inches, pause.

@johnnyarpa

Жыл бұрын

@@ClassyTacos thank you great video

@ClassyTacos

Жыл бұрын

@@johnnyarpa thank you

What is fuel wheel on your taco

@ClassyTacos

3 жыл бұрын

The wheels are Fuel Kicker D699 / 17x9 -12 0ffset. Thanks for watching.

@Wolf-go5py

3 жыл бұрын

@@ClassyTacos nice set-up budd

Yo

Do you have instagram for your truck?

@ClassyTacos

3 жыл бұрын

theclassytacos1 is the IG. Everything else was taken. Also have a link to the IG on the Channel Page in the banner. Thanks for watching.

@mrsukwoo8257

3 жыл бұрын

@@ClassyTacos Thanks man. Followed. Don’t you think you could’ve fitted 35x12.5 with the works you’ve done? I pretty much have done all the works you did and I’m debating between 295/70/17 vs. 35x12.5

@ClassyTacos

3 жыл бұрын

@@mrsukwoo8257 From my experience with the work done and past stuff. Yes, the 35s will fit for street driving. But will need more trimming for Off road. Also with the 35s the truck will feel like a slug with stock gearing so be prepared for a gearing change. With 35s I feel like my CMC would not be enough and I would have to go with the aftermarket cab mount route. Many people have to remove the inner fender plastics for 35s so that usually means a snorkel as the air box intake is in the passenger fender well. It takes a ton of work/parts to rock 35s correctly. The 295 is a nice first step or gateway to 35s while you get the truck ready for the 35s. Thanks for watching.

@mrsukwoo8257

3 жыл бұрын

@@ClassyTacos thanks man. That was very helpful

@ClassyTacos

3 жыл бұрын

@@mrsukwoo8257 No worries, glad I could help.

Tear it up...

@ClassyTacos

3 жыл бұрын

Thanks for watching.

Will - 10 have about the same poke out? Been lookin at some 16's with -10 offset

@ClassyTacos

Жыл бұрын

Yes, very similar. Thanks for watching.

@uno3863

Жыл бұрын

@@ClassyTacos thank you brother for the reply, your truck looks awesome, I'm needing my 2012 TRD sport tires to poke out 👌🏾