This webinar was presented on 1/21/14. The link to the presentation handout: tinyurl.com/ybyna847
Жүктеу.....
Пікірлер: 8
@fanfare46612 күн бұрын
Welldone❤
@atra-automatictransmission1300
13 сағат бұрын
Thanks 🤗
@BattleKing2Delta Жыл бұрын
Do you know how many clicks the torque converter takes to seat properly on an a750f? Mine has seated 3 clicks but tranny isn't wanting to mate to the block.
@atra-automatictransmission1300
Жыл бұрын
I don't understand what you mean by clicks? once the Converter is installed to the stator support and pump assembly it will be buried in the bellhousing and have to be slightly pulled closer to the flywheel once the transmission is installed. i hope this helps
@user-ck9qq9eg6o
Жыл бұрын
Здравствуйте Сер ! Скажите пожалуйста! У меня проблема с АКПП, если утром выехал до конца непрогреом ДВС то АКПП падает в аварию 1передача 2передача и на 3 передаче остаётся ! Но если машину перезапустить то все хорошо и едит уже нормально. Может быть это связана с датчиками температуры АКПП А760 F ???🙏🙏🙏🙏🙏
@BattleKing2Delta
Жыл бұрын
My replacement engine had the round I think 6 hole plate that goes between the crank and converter already on it and I ended up putting my old one off of the blown engine on it too. I doubled up that spacer or whatever it is and that is what caused my problem. Caused me to crack the sump and completely pull the tranny again but it's been going strong ever since.
@user-dh9fi6ml2b Жыл бұрын
hi. why is my SLU solenoid doesnt work? always off position. cant engage 4th n 5th gear? a750f transmission
@RadoslavLucic
2 ай бұрын
Hi, I have the same problem. Have you found a solution?
Пікірлер: 8
Welldone❤
@atra-automatictransmission1300
13 сағат бұрын
Thanks 🤗
Do you know how many clicks the torque converter takes to seat properly on an a750f? Mine has seated 3 clicks but tranny isn't wanting to mate to the block.
@atra-automatictransmission1300
Жыл бұрын
I don't understand what you mean by clicks? once the Converter is installed to the stator support and pump assembly it will be buried in the bellhousing and have to be slightly pulled closer to the flywheel once the transmission is installed. i hope this helps
@user-ck9qq9eg6o
Жыл бұрын
Здравствуйте Сер ! Скажите пожалуйста! У меня проблема с АКПП, если утром выехал до конца непрогреом ДВС то АКПП падает в аварию 1передача 2передача и на 3 передаче остаётся ! Но если машину перезапустить то все хорошо и едит уже нормально. Может быть это связана с датчиками температуры АКПП А760 F ???🙏🙏🙏🙏🙏
@BattleKing2Delta
Жыл бұрын
My replacement engine had the round I think 6 hole plate that goes between the crank and converter already on it and I ended up putting my old one off of the blown engine on it too. I doubled up that spacer or whatever it is and that is what caused my problem. Caused me to crack the sump and completely pull the tranny again but it's been going strong ever since.
hi. why is my SLU solenoid doesnt work? always off position. cant engage 4th n 5th gear? a750f transmission
@RadoslavLucic
2 ай бұрын
Hi, I have the same problem. Have you found a solution?