Looking good. Nice improvements. I want to drive it one day. 😊

I have owned my Massimo UTV 500 for 8 years and have made some very helpful & useful mods. #1 - Added/installed a hi-intensity 16 " LED light bar, onto the 'brow' of cockpit roof, then mounted On-Off switch to instrument panel at 'knockout' plug location. #2 - Ordered a Volkswagen rear view mirror & mounted it just to the inside lip of the cockpit cover. #3 - Purchased a Kidde fire extinguisher at local hardware store and mounted the unit between the seats to the center vertical support bar. #4 - Purchased a 'flat' cargo rack and mounted it onto the roof top with stainless bolts & nuts down to attach to the cockpit tubes. #5 - The UTV needed a 'dust shield' when operating in rough dusty country. The 'fix' was to take sheet of inexpensive 'Corplast' (new or used), then cut the bottom edge to fit the contour behind the seats, around the various bulges & bumps, then trim the top edge to just below the top of the seats, then rounded the corners a bit and spray paint a coat of Rustoleum X-2 Canyon Black, WOW, no more choking dust in the cockpit !! and it cuts down a lot of engine & road noise. #6 - Purchased a 9'X 7' camo colored poly tarp, rolled it up and used a 6 foot length of 1/4" nylon rope to attach the now rolled tarp to the horizontal crossbar just behind the seats. #7 - Purchased a removable bench type 'jump/rumble seat' and mounted in dump bed. #8 - Mounted farm vehicle 'triangle' sign to surface of the tail gate using 2 stainless 1/2" sheet metal screws. CAUTION Do not mount the triangle below the bottom of tailgate as it can easily be knocked off by brush or brambles. #9 - Purchased an extended square tube trailer towing bar at hardware supply & installed into vehicle reciever tube and secured with easily removable pinion & 'clip'. #10 - Purchased small yard type trailer at Tractor Supply that is easily hooked up, & towed by my UTV, then purchased various spray cans of camo color spraypaint and painted the trailer to closely match my UTV's camo pattern. Nifty !! 11# - Purchased a HD weapons magnet at Academy and mounted undernearh instrument panel to hold a handgun as I live in rattlesnake country. *** Now working on improving the cockpit door return & closure system, will replace easily rotted rubber return bands with stainless springs using same mounting points on doors. The door latches also need a bit of attention and possible fix will be use of a 'swatch' of HD type velcro to heip keep doors closed when operating in snake country 🐍🔫

@tejician1

5 жыл бұрын

One Additional Note -- Beneath the drivers seat is empty wasted space. Using Corplast again I cut small panels to fit between the engine and empty space & a small placard to fit at back of the empty space, then purchased very small foam cooler which fit perfectly into the space. I now have a cooler for drinks or eats while out scouting the countryside or hunting.

@twHomeShow

5 жыл бұрын

@@tejician1 Hey Jim, thanks for sharing your ideas! That's some nice work you've done. I've been wanting to add a Light-Bar, like you mentioned :)

i could use the noise reducer for sure, nice mods!

Where did you get those L-Brackets from or their name, am wanting to do this but not finding them.

Nice mods to the Massimo, It really makes a difference in the look! I'd like to do the same to my BMS 700 Ranch Pony. Where did you get the L-brackets to mount the roll bar?

Thank s for the video. Where did you mount the Light Bar?

i didnt see any but ill look again thanks its a nice looking ride

What rear view mirror do you have?

You should install a light bar

THE BED IS COMPLETELY SAFE AND WILL NOT MOVE WHAT SO EVER YOU DONT NEED ANY CABLES! LOL WOW THIS COOL GUY IS SOMETHING ELSE LOL HE DOESN'T EVEN LIVE IN THE WORDS LOL

@marcuswyatt2849

2 жыл бұрын

This video is a waste of time. Lol

Where did you buy those wheel?

Does the steering get better the more you use?

The roll bar and netting do it one better in the looks dept for sure.

@ronaldarndt7314

5 жыл бұрын

Really nice

Man these are some boss mods bro.😊😊

3:00 it's pronounced pole-air-iss. For anyone who doesn't know.

You could have atleast let us hear it running.

Like great!!

@twHomeShow

3 жыл бұрын

Thanks for the visit

Looks great. Where did you get the L brackets and what size? Thanks

@domandred

4 жыл бұрын

Any help on this? Kind of an important part for the roll cage setup

@Mamagrizz1990

3 жыл бұрын

I’m also looking just purchased the same bar looking to do the dame

@joshyelton

Жыл бұрын

@@domandred ever find out what brackets he used?

I know this is an old video but where did you get the Hitch Adapter?

@twHomeShow

2 жыл бұрын

The hitch adapter came with mine.

@allennewland9749

2 жыл бұрын

@@twHomeShow Thank you for the reply!! Makes perfect sense it SHOULD come with it. I'm reaching out to them today.

where did you get the uni seat ?

@twHomeShow

6 жыл бұрын

Hi Scottie, I put the links to everything in the description below the video. Thanks for watching.

@tejician1

5 жыл бұрын

Amazon

Where did you get the muffler sound reducer?

@twHomeShow

5 жыл бұрын

The link is in the video description :)

@tejician1

5 жыл бұрын

Don't purchase the sound reduction unit, doesnt work worth a 'plugged' nickle, noise problem is easily solved with sheet of Corplast, cut to fit & slipped behind seats (10 mins of work)

Don't they sale those UTV's at Tractor Supply

@georgescreeksawshop

5 жыл бұрын

ricardo dominguez vlogs yes

@edwardgrier7096

2 жыл бұрын

@@georgescreeksawshop Got mine at LOWES. Trading under AXES 500.

Roll cage link is broken

@twHomeShow

6 жыл бұрын

It's not broken, but I see that the item is currently NOT Available at this time :(

silencer on the exhaust will not make the sound in the cab any better thats all engine noise you here you gotta do other stuff to change that

@tejician1

5 жыл бұрын

Easy fix for 'quieting' engine/road noise and blowing dust in cockpit is to cut and make a 'shield' from a 4 X 5 sheet of Corplast material (used for political signs etc). Using a marker draw and cut a contour to fit closely the various bumps & bulges at bottom & backs of cockpit seats, then trim top of Corplast to just below sear backs, finish up by spray painting a coat of Rustoleum X-2 Canyon Black to match tubes. I did mine 8 years ago and it still appears new after many hours of hard use.

@jaytodd5809

5 жыл бұрын

Jim..what did you do about the heat from the engine?

@tejician1

5 жыл бұрын

Most of the problems "new" owners of the Massimo UTV are caused by an absence of a 'Baffle' between the dump bed and the cab or seats. Without the baffle engine heat floods into the cab which is very uncomfortable during the warmer months of the year and choking road dust comes rolling into the cab. These 3 problems were easily solved by using a 1/8 in. thick sheet of corrugated political signage, then using a marker (Sharpie) to follow the undalting bulges & curves at the rear & bottom of the seats, then drawing a line across the top of the seats..Then cutting out the pattern and lastly using a spray can of Rustoleum X-2, color to match the Massimo's color. My Massimo is camo colored, I used Black to match the vehicles structure. You now have a baffle partition that is easily installed & doesn't require screws or zip ties to hold in place and easily fits between the dump bed & seats and is waterproof. I noticed an added benefit after installation... Excessive engine noise was eliminated allowing for normal conversation. I know that I should have made a KZread 'How To' but that would have made a bigger hassle than explaining the simple & inexpensive process....😃

@jaytodd5809

5 жыл бұрын

Why thanks Jim for taking the time to give an in-depth description..really apprecIate that..I think a video would be quite beneficial to us sufferers of the Massimo brand haha lol. ..well I will give the partition a try but first I got to do something about the ridiculous amount of time it takes to get up to speed..im a new used owner and I think the previous owners drove itbin high gear only?

Get accessories for Yamaha rhino for exact fit instead of stuff for Polaris.

@edwardgrier7096

2 жыл бұрын

Yamaha - for the roll bar and Cargo net?

@joshyelton

Жыл бұрын

@@edwardgrier7096 i heared that too. its a clone of a yamaha rhino

You can't put anything in the back now lol And roll bar!?!? Lol that thing will never come close to tipping!! Your daddy's awe lol

Hisun is what I have a d it can go 60to90 mph

I have a yerf dog rover

Pole air iss. Say it with me this time, pole air isss. Not polarius.

Brah (anti-exclamation)

First thing we did is remove the stupid doors....I guess if you drive through a bunch of overgrowth they make sense but for a hobby farm jumping in and out of the UTV they are just a pain to open and close ...tooke em RIGHT out ...obviously these machines are NOT going to fulfil anyone looking for a play vehicle...they are dogs compared to the toys....these are hobby farm work UTVs if you ask me...I suppose they would work for hunting too but really not all that serious of machines for deep in the shit

@edwardgrier7096

2 жыл бұрын

Disagree. You can take it just about as far as your driving skills will take you. It is almost impossible to get stuck. A Fun Work Horse. Mud or snow runs great.

MODS ?... Sorry but, nothing impressive !

@twHomeShow

6 жыл бұрын

Mauricio D yes, I know....I only had about 4 or 5 mods to include in this video. I think next time I'll wait at least until I have a list of 10 mods for a video. Thanks for watching :)

@tejician1

5 жыл бұрын

No Mods ??? You Sir have NO imagination !! Read some of my comments, surely you can add a few to my Mods.

@jaxonestes8521

4 жыл бұрын

Jim Marshall listen lets be nice