Best I've seen at mixing wood and 3d printing.

02:22 that pencil sharpener is O.P. 😂

Just wanted to say don't be put off by comments that dont understand where this technology is headed. I have just purchased a Bambu printer (working on old cars) and having a 250mm² box to build anything in had my head exploding with ideas. These projects are awesome examples. Thankyou

@truantray

22 күн бұрын

I have been 3D printing since 2016. The biggest problem with KZread is that while they can look practical, the prints are simply not strong enough unless very carefully engineered with expensive engineering grade plastics. A 3 second strength stunt will not cut it, because when someone leans on one leg of those stools, they will break it. 3DP is great for prototyping. 3D printing has its applications, but really only if people learn CAD as well. Otherwise, it's a huge waste of plastic for pointless knick knacks.

@Max-bd9xg

21 күн бұрын

@@truantray you don't need fancy Material to do something like this. I did some Furniture projects with cheap ABS+, PLA+, PETG and TPU. Bigger nozzle, 3 to 5 Perimeters and the parts are extreme strong.

@rusername

19 күн бұрын

@@truantray nylon is cheap and very strong

Wow, your creativity with wood and 3D printing is truly inspiring! Can't wait to see more of your DIY furniture projects! 🔨🛋️

you are by far the best maker i have meet on internet

Love the flexible joints. Really helps with stress absorption and promotes more comfort than hard plastic.

The first one looked like it had a some good flex to it. Also looks quite nice.

@JWill6969

24 күн бұрын

I think it's supposed to. If it didn't have some give to it, it'd break rather than flex which would destroy it

@Qwarzz

24 күн бұрын

@@JWill6969 I did mean it in a good way. Might even be more comfortable to sit on than a rigid stool.

You are really an inspiration on how you approach your work process, thanks for the content

Wow, great work! Yes, I do 3D print stuff and wood working.... Now I'm a bit embarrassed Id never really thought about combining them.... Bravo! Ill try to up my game now lol

This is pretty nice. Everything you do seems so high quality. "How you do anything is how you do everything" really does seem to be true

Nice designs, you incorporated 3D printing into the furniture nicely balancing it with wood parts, playing on strengths and weaknesses of each.

This was really mind blowing 🤯 I had no clue that 3D printing was this strong.

No spades were harmed throughout the making of this video. I love your work man, keep it up👌

Some fantastic ideas. Great work

Wow, your are a Top shelf creator man.....your designs never disappoint! Keep it up! I want to learn C.A.D (grasshopper) really badly!

Having fun with 3D printers! Ur prints are nice! I like the shapery of things.

Your video made me change the point of view on using 3D printing for the final product. Fabulous.

I only really like how it looks when they are one clean looking part like the center part of the first stool. But the ability to create very specific parts like on 2:22 , 5:45 and 6:45 is amazing.

This is fucking amazing. Love every project. Why theres so little woodworking/3d printing fusion, I never thought until now to wonder. You have proven without a doubt its value. Bravo!

@bnalive5077

22 күн бұрын

Because any wood worker worth his weight wouldn’t want plastic garbage used in their furniture.

Thanks for sharing. Very inspiring.

Комментарий в поддержку канала и ролика, а также труда мастера

no, actually its nice. your video convinced me! Thx

Your product design skills are simply impressive. This is from a 12+ years 3d printer ;-)

Great work; Won subscriber from Afghanistan.

What is the software that you use in the video to design? Seems straight forward.

Amazing. Can you share what material you use for 3D printed parts and how many walls and % infill? Thanks.

All of these is of high quality! Congrats. Are those recesses (cutouts) in the inner faces ( 6:58 ) of the threads intended to be strain reliefs?

I wish I had those STLs, would love to build some of the table and stools

Interesting! if you can get a rotator router that cna carve some celtic legs and route some complex table tops with epoxy inlays it would be fun.

Very Nice. Curious. Which stool do you suppose can hold the heaviest load?

Hello) nice video, what 3d printer are you using?

What workholdimg system do you have? That is beautiful

Wow that's cool

Luf it :)

Neat!

Genial!!!!!

Amazing 💌

Is it possible to make dowel rod stool in 3/8" and 1/2" version of dowels. 10mm dowels are hard to get in the US.

I would still prefer some post processing after the print is done, try using some Bondo or stuff like that, it will get rid of the gap between parts and also layer lines.

Nice! What kind of parametric modeller is that?

@MoAvW

25 күн бұрын

Rhino with Grasshopper

@MarinusMakesStuff

25 күн бұрын

@@MoAvW Grasshopper, my favorite!

One Day ... I should get a printer

Hello! What model of your 3D printer?

Which printer do you use?

Farbe und Form des Hockers erinnern an einen dreibeinigen Klopümpel.

Yes.

nice

What application he used?

Where can I get the penicil sharpener?

actually 3d print big part is not cheap. I am quite curious about why some big regular shapes are not using laser cut / cnc / manual lathe/miling machine instead of 3d print. Though I know they are usually huge machine, but there are some smaller one I think.

the amount of wood work might as well do all wood

Abs or pla?

What is music you use in video?

@hronex

20 күн бұрын

Say me too

What is music in video?

Brilliant. What is that parametric modelling software you were using?

@odonotso3941

25 күн бұрын

Prob grasshopper on rhino

This man is using his 3d printer right. :)

We can only hope this guy grows out of the standing on things phase before he has a baby... 😂

Very cool! But it hurt seeing the base break, can't imagine your face when that happened. SIlk PLA sucks!

Kuhnya🤔? У меня начинают закрадываться смутные подозрения😁

3d printing was never ugly unless the person doing it doesn't know how to print and polish

The code for 20% does not work

⭐🙂👍

PLA? Really ? That's bold ! Wouldn't be harder to do it in ASA and I would feel more safe

Теперь техно трудовики делают табуретки при помощи 3д принтера.. ничего не изменилось

Roflol 😂 do it yourself only need massive amount of special tools

This is great. But there is a "but". PLA is malleable. Not sure that is what you want to use, due to that very fact. Also, you should ask Elegoo or someone to sponser you with a larger bed printer, as you obviously would make use of it. Also, your printed parts are easy to reproduce, while your woodworking is not. For instance, the chair in the beginning of the vid, is awesome, but some of the parts is impossible to reproduce for the most of us. If you managed to make something, with easily reproducible wooden parts, or with alternate commercial parts, and entire market is suddenly yours. Lastly, you really should look at using m14-m18 printed screws. They are super easy to design for, once you understand them, and super strong. They are easily embedded into parts, and just a ton stronger than the thin diameter screws you are using. Just reduce the width of the male screw to 98%, and tap the female. Flat head shape for your driver bit. Love what you did with the legs in the last couple of vids. That is easily reproducible, just a plain cut, if you ever considered allowing others to copy your work. Thanks for doing this. I would really love for you to make a living on the parts itself, and not just on the tube.

01:29 was that Strauss???

Still hard to make and expensive

Ehh.. it's not like it's 3D printed furniture (hence the weakness) it's just wood furniture that replaces glue for 3D printed parts. I mean, the wood gives the structural strength and you still need screws.

It’s DIY if you have $30k of woodworking tools…

Ah so easy, except for the multiple hours and power it'll take to print all this. 3D printing such pieces is really enticing, but for anyone looking to make all this know that PRINTING OF SUCH PARTS TAKES HOURS AND HOURS. Hours that you would NOT want to put in everytime you want a new stool, that isn't as strong. Please know this and then get excited. I have not even touch on the filament spent on making such pieces. Few seconds of sitting does not make it a great project or product. If that was the case? we would be seeing furniture being sold by the masses, all fabricated on desktop 3d printers. Also, for these projects, its not the PRINT or Material that is strong, its the Design/Structure. Please keep that in mind as well. Themoplastics are not better than Engineered wood, take them as that. Yes, there are exceptions, but use that comparison when working with projects that will be under constant load when in use.

@8777ga

12 күн бұрын

there is 1 more thing a little less obvious - normally it isn't 100% infill, try like 15% infill. what looks strong superficially can break under fatigue no sooner than some repeated use, and any large infill say 80% printing may extend the printing of the large pieces from say days to weeks for each and the risk of printing any of the large pieces failing between the hours is much higher. there is a solution though, and it may not be cheap, e.g. to reinforce 3d prints with fibreglass and resin. those can make the end product cost significantly more each and have to deal with chemical hazards from resins e.g. unsaturated polyester resin can produce large amount of styrene during work and cure and requires wearing a VOC respirator for safety working with that.

@f.c.2475

12 күн бұрын

@@8777ga noted and I agree. So, all in all, this isn't really an alternate to an actual stool, but merely an indulgence.

3D 打印有這麼結實嗎 ？？？？？

Why is it that the designs you make and sell do not have anything stated about the recommended materials and basic print settings (infill/wall thickness…etc)? I think it is a bit odd that you would leave out half of the design information for items that have been designed and tested to meet the intent of the product. It makes it so someone has to go through a lot of waste and testing on their end. I appreciate your designs but seems only half way implemented from a product view.

He uses a lot of wood in these 3d printed pieces

@andyd8865

19 күн бұрын

Title should say how to make 3d printed wood joinery

Honestly, I'm not confident in using 3D printed plastic for making furniture. Whether it's PLA, ABS, or PETG, their strength and durability make it challenging for me. The hot melt after extrusion and fusion between the layers often lead to cracks. Plus, some materials' physical properties are affected by temperature. So, I don't think this is a good approach.

@kamdown1669

20 күн бұрын

You could explore other forms of 3D printing other than FDM. SLA and SLS can both produce highly heat-resistant parts

@bill6374

20 күн бұрын

@@kamdown1669 Unfortunately, the resin used in SLA printing tends to gradually crack over time.

@gayanmuhandiram2831

17 күн бұрын

Strength is not a problem for 3D printing brother. I made an FDM PLA guitar hanger to hang my very heavy bass. It’s been a year now not a single mm yielded. And in my country ambient temperature is around 37C. So no creep deformation as well. Of course you can always use SLA and SLS where temperature resistance and layer adhesion is higher. If you don’t like that you can always make 3D printed molds and make carbon fiber parts which are hell of a lot stronger. Possibilities are endless with 3D printing my friend. ❤

to answer the question: plastic is an ugly, cheap material. but all the epoxy stuff is much more disgusting. 3d print for model making "in the process" or small repair stuff. but i prefer also natural material for design, model making and other architecture stuff.

It's too bad that not all the details here are printed on a 3d printer. This means that they have not yet reached the desired point of progress.

@og_lama

19 күн бұрын

3d printer can print the whole thing , in this video just mixing

@hecyea9353

3 күн бұрын

Seriously?? 🤦🏻‍♂️🤦🏻‍♂️ this guy is amazing

Автор просто сливает пластик в мусорку

The biggest problems still persist: Its plastic and we should be doing everything to minimize its use. The mechanical qualities of the components can vary widely as the manufacturing process cannot guarantee uniform results. This can lead to unexpected failures and injuries, a huge liability issue if they are made for profit or for public use.

@karthick86c

24 күн бұрын

Yes, I was thinking the same thing. I am quite worried about the reliability and durability of the 3D-printed components being used as load-bearing elements of the furniture. I would never sit on a piece of furniture that has 3D printed components as I use a lot of 3D printed components in the lab and see them fail occasionally.

@Dev1nci

21 күн бұрын

Yeah but it’s DIY so in a way it’s a good thing, it forces people to practice their common sense instead of trying to sue because they’ve discovered a novel way to frame an accident that’s technically their own fault. I’m being facetious but in my industry fear of being sued is a real problem and I’m feeling sorry for myself about it 😂😂😂

@loganduncan1987

20 күн бұрын

Having done a fair bit of 3d printing in various materials, you would be surprised at how well 3d printed stuff lasts. And depending on the material type used you can get it to not only be strong but heat resistant and UV light durable. And it doesn't cost much to make 3d printed parts of whatever color/shape. I wouldn't buy one of these only because I could make it myself and improve/change the design to fit whatever standard or need I could think of.

@graey2

20 күн бұрын

Honestly, 3D printed plastics can also be a solution. Recycled PLA filament is easily sourced, and it's not hard to print something that will last ten+ years. There's biases in both ways, but there's a healthy middle ground that should not be left untapped.

@absak

20 күн бұрын

Just print it in ASA...it'll outlast you.

Crack

Nobody ask 4 this

@zpinacz

19 күн бұрын

I do

Here, sit on this pluger... no thanks.

Какой бред - печатать табуретки на 3D принтере!

3D printed? Over half of it is made out of wood. What a joke

Is that Plastic?.. the stuff the world is now trying to get rid of. But you are in fact modelling with..?

@taitbrown8919

25 күн бұрын

PLA made from corn or PET-G made from recycled bottles... ABS is gross.

@JustinAlexander1976

25 күн бұрын

@@taitbrown8919 PET is recyclable, PET-G not so much. The extra glycol screws up the recycling process.

@worthstream

25 күн бұрын

​@@JustinAlexander1976 PETG is technically recyclable, just at higher temps than standard PETE. It's not widely done, in part for the higher costs, in part for lacking of regulatory framework. In the UK, for example, law does not specifically lists it in the "recyclable plastics" category, so it falls in the "other recyclable materials" category.

@JustinAlexander1976

25 күн бұрын

@@worthstream 100% agree... so it's still not recyclable.

@tazanteflight8670

24 күн бұрын

Is that plastic you are typing on..? Stop supporting plastic. Give up your computer, phone, transportation, housing, favorite foods, entertainment. Go pick up some trash.

Good work, but i personally dont like the aesthetics of your furniture