TOP 3 Rollers That Will Make YOUR Paint Job Look Amazing
Timestamps:
0:00 Introduction
0:58 14 Inch Roller
3:57 9 Inch Roller
5:32 4 Inch Roller
7:14 Quarter Inch Nap
8:00 Conclusion
14 inch Roller: www.amazon.com/Wooster-Brush-...
9 inch Roller: www.amazon.com/Wooster-Brush-...
4 Inch Roller: www.sherwin-williams.com/home...
Quarter Inch Nap: www.homedepot.com/p/Wooster-9...
Пікірлер: 82
Always great advice from Practical Painting! Thanks.
@SuperVassarBrothers
2 жыл бұрын
Thanks Beverly. Hopefully it was practical advice :)
Love you man. GREAT videos. Such a nice alternative to the Idaho painter.
@SuperVassarBrothers
4 ай бұрын
Haha, thank you kind sir 🫡
Fabulous!
@SuperVassarBrothers
Жыл бұрын
Oh stop it.... never mind, pile on the compliments
Great video. Will try 1/2” cover (typically I have used 3/8”). Looking fit and trim for summer!
@SuperVassarBrothers
2 жыл бұрын
Thanks Leroy. We used 3/8 for a long time and over the last few years have moved to 1/2". The 1/2 from Wooster finish like a 3/8 which is why we like them so much. And they hold more paint.
Best painting videos I’ve seen
@SuperVassarBrothers
Жыл бұрын
Thanks Jerrod! I'm doing my best 😁
If you're doing production based work like with new houses for a builder/developer, I highly recommend the 18" with that frame because getting so close to the cut in is less important than still getting a good job done as timely as possible while expending as little energy and causing as little fatigue as possible. I was the best wall roller of my crew and I could roll a whole room with one of these and get high quality finish almost as fast as someone could airless spray it. 👍 For anything else though, I don't think it really matters a whole lot and I would probably go for the one sided form myself for those extra close cut ins.
@SuperVassarBrothers
Жыл бұрын
18s are the business for production work for sure 🤙
I learn a lot with you. 🎉
@SuperVassarBrothers
Жыл бұрын
Hopefully it’s useful things!
Great tips! I've never used a roller cover that didn't shed 😅 definitely going to look out for woven ones on my next project.
@SuperVassarBrothers
2 жыл бұрын
We used the Pro Dooz FTP today and no shedding :)
I’m a big fan of the colossus stroller covers from sherwin. Holds a lot of paint, distributes it very well, pretty easy to clean. Wouldn’t use them on like a rough surface exterior or popcorn ceiling but anything else I always use them
@SuperVassarBrothers
4 ай бұрын
Those are solid. I’ve used them before and they’re a great choice!
Thk u for good tips
@SuperVassarBrothers
6 ай бұрын
You are welcome! I hope they help
Nice video brother. I like the 14 inch roller better that 18 inch roller. 14 inch rollers are easier to clean the roller spinner cleaner.
@SuperVassarBrothers
Жыл бұрын
Thank you kind sir. I’m a big fan of the 14s too. They’ve become standard for most of our job load outs 🤙
Great video I really learn a lot from these. Have you tried microfiber? They seem to have less lint than the woven.
@SuperVassarBrothers
2 жыл бұрын
Thanks for the feedback. The 4" microfibers are nice. We haven't had much luck with the 9" ones tho.
I just bought several of the 3/8" nap 9" Pro Doo-Z FTP rollers. The plan was to paint my garage with them and see how they do. Hopefully I am not conpletely wasting my time by not going with 1/2" :( Ace Hardware here in MN carries the FTP branded rollers... for anyone here in my neck of the woods and maybe stumbling upon this.
@SuperVassarBrothers
10 ай бұрын
You'll be fine with the 3/8"s. It'll give you a good feel for that length of nap. Give the 1/2" a try on the next one and see how they compare for you.
Great video! For our project we have a lot of fresh drywall that is going to get a PVA coat first. Would you still recommend the 3/8" Pro-Doo Z for that as well?
@SuperVassarBrothers
10 ай бұрын
We’ve been using the 1/2” for pretty much everything now. That would be my recommendation
Question: priming flat, smooth walls for lime paint wash... foam roller or one of these for the flattest texture possible? I believe the primer is acrylic based. Thanks!
@SuperVassarBrothers
Жыл бұрын
I would go with a 3/8” Wooster Pro-Doo Z. That’ll give you a really smooth finish to start with. Good luck with your project!
Thank you for the video! Can I use the 1/2 nap pro doo z ftp for stucco? Or do I need to get the 3/4 nap?
@SuperVassarBrothers
8 ай бұрын
It depends on how rough the stucco is. If it’s kinda smooth-ish then the 1/2 inch will work. If you feel like you need more spread then you can jump up to the 3/4.
the wooster 18 inch cage actually has a slimmer profile at the ends than the wooster 9 inch and 14 inch frames do.
@SuperVassarBrothers
Жыл бұрын
We haven't had much success with the 18's for residential repaints. 14's are our sweet spot. To each is own tho. Thanks for the comment
Hello I Loveeee your channel. This video you recommend a 1/4 nap for doors. A previous video you also recommend 3/8 nap (which I used) but our local hardware store has 1/2 nap for smooth surfaces. Now I'm confused again 😂. Can you explain the difference? One of your video you posted a chart showing 1/4 nap for smooth up to 1/2 nap rough surfaces which is very helpful. Thanks in advance for your response.
@SuperVassarBrothers
10 ай бұрын
You can use 1/4 inch or 3/8s on doors. The shorter the nap the “tighter” the stipple pattern which usually looks better. We use 1/4 inch on most flat panel doors, and 1/2 inch on walls. My preferred roller cover for walls is the Wooster 1/2 inch pro-doo-z FTP
If speed is what youre after you would spray. 14 means unnecessary costs in additional trays, cages and sleeves.
@SuperVassarBrothers
22 күн бұрын
There are lots of scenarios where spraying is not appropriate. 14s make a huge difference when rolling big walls and ceilings. It’s cost effective for my crew, but if it’s not for you then that’s cool too.
@gianthills
22 күн бұрын
@@SuperVassarBrothers then you switch to a 9 when the 14 is too big.. Becomes inefficient. Two sets of trays and sleeves. Have you timed yourself? Or you just assume you're so much faster? How 'bout you show us on an actual job.
👍✌
@SuperVassarBrothers
7 ай бұрын
🤙
How do you keep the roll on the handle?!:) When I put it on it does have click, seems it's in place, but after a couple of rolling it falls off. I tried different ones, all falls off. They can't be all a bad brand or broken. What am I doing wrong?
@SuperVassarBrothers
Жыл бұрын
That might be an issue with a bad batch of roller covers or you have not seated the cover completely on the frame. That’s happened to us before. If you continue to have the issue then I’d try out a different roller frame. Wooster makes some decent ones.
Спасибо за информацию! скажите а вы пользуетесь замедлителем высыхания?
@SuperVassarBrothers
Жыл бұрын
👍
@user-hf2up7lt6w
Жыл бұрын
@@SuperVassarBrothers Thank you for the information! tell me, do you use a drying retarder?
I'm trying to match a texture that is very slightly pebbled, like a football. Any suggestions out there?
@SuperVassarBrothers
Жыл бұрын
Hmmmm, I think I know what you’re talking about. You may have to end up experimenting with a few different roller covers. I’d try 1/4 inch nap, then maybe a 3/8s. See what’s closer to what you’re trying to replicate.
@paulq9293
Жыл бұрын
@@SuperVassarBrothers Appreciate the response and will try those out. Thank you!
What is the best roller using Beyond Paint on countertops?
@SuperVassarBrothers
Жыл бұрын
I have zero experience with that product and I’ve also never painted countertops. I’m guessing 1/4 inch Wooster or Sherwin Williams roller would work best to give you a smooth finish.
@ndhudecz
Жыл бұрын
@@SuperVassarBrothers Thanks....
Have you ever used an 18” sleeve on a 14” roller cage?
@SuperVassarBrothers
Жыл бұрын
I have not, although that might work. I have a feeling it would be difficult to get the proper amount of pressure on the side of the roller cover that's hanging off the cage.
@Adamantium08
Жыл бұрын
@@AZDESERT2024 you put the end cap on it ;) but yeah it didn’t work too well, wobbled a bit
Umm, aren’t they called “whizzers” because the brand Whizz invented them? Either way I like your set up? Have you ever used the purple rollers from Home Depot? Another really nice woven roller and they have matching covers for your 4” small cage.
@SuperVassarBrothers
Жыл бұрын
I have not tried the purple rollers. We are pretty well settled on the FTPs for now, but I'll check those out in the future.
@gianthills
Ай бұрын
"whiz" rollers refers to urinating because the little roller can easily get behind the toilets to paint bathroom walls. If this guy had been painting 20 years he would have known that.
paint tray and liner verses screen roller in 5 gallon bucket, hum
@SuperVassarBrothers
Жыл бұрын
The liners work for the type of painting we do. We almost never use 5s
Misleading title. Hope Wooster is sponsoring him
@SuperVassarBrothers
8 ай бұрын
You should write to Wooster. I’d love to be sponsored by them.
@BirdTrainingClub
8 ай бұрын
@@SuperVassarBrothers No. wouldn’t want my brand to reflect that :)
own purdy brushes didnt like the purdy pole it wobbled and heavy like thge wooster the quick connector roller to pole, and roller by purdy sqeaks wobbles feels low quality wooster better by]uild and tap on one side the nap falls off
@SuperVassarBrothers
Жыл бұрын
I’m a big fan of the Sher-lock polls from Wooster
@jeffalan6339
Жыл бұрын
@@SuperVassarBrothers me too! I checked out Purdy is fiberglass like wobbles full extension heavier, many complaints on the pole contracts whiteout warning from pros. Wooster one complaint can only to align the holes for a area to paint. I did my homework and glad I did the Wooster is aluminum sturdy yet lightweight, like the roller locks on via a "clip" to say, fast on, fast off, like the Wooster Roller done tap it on one side the nap falls off.
the nap is too short,and i think you talking about latex paint ,for acryl paint you need 18mm nap ,and best roller is standard size that fit in too bucket of paint, you paint 23 colors ? and then ?good 1 time use roller is the best.
@SuperVassarBrothers
3 ай бұрын
👍
8 Minute video talking about roller size & nap, 6 seconds mentioning 'woven' which was the only value for someone looking for material type, 0 time spent describing actual roller material (microfiber/mohair/foam etc etc)
@SuperVassarBrothers
Жыл бұрын
Yup, cause these are the ones I like the most.
@MM-es9dc
3 ай бұрын
He did that in a other video
Don't buy this woodster rollers they don't hold enough paint and a lot of little drips use purdy or lamb skin from Sherwin Williams wet them first when out the pacake
@SuperVassarBrothers
11 ай бұрын
That has not been my experience with the wooster Pro-Doo Z FTP line. I ran into a lot of issues with purdy's shedding nap falling apart. That's why we switched over to the FTPs. Holding enough paint has more to do with what inch nap you're using. We use 1/2 inch for almost everything and it works well for the work we do.
Don't need the 14. The 9 is fine. Even on large construction jobs with 30 foot walls, 9 is the standard.
@SuperVassarBrothers
8 ай бұрын
I was unaware there were published standards. You might wanna try a 14…it’s quite a bit faster
@DAMON409
8 ай бұрын
@@SuperVassarBrothers standard tools are those that are used commonly. If 14 were faster the industry would be using them. They're heavier so any benefit you think you're gaining on coverage speed is negligible.
@SuperVassarBrothers
7 ай бұрын
I still don’t know how you’re quantifying “commonly”. Who are you referring to as the “industry”? 9 inch covers are not the standard. Maybe for the DIY and homeowner crowd. 14s are noticeably faster than a 9 and we move quickly with them. Based on your comments I can only assume that you’ve never tried them enough to make an accurate comparison.
@DAMON409
7 ай бұрын
@@SuperVassarBrothers I've worked for several companies doing commercial and residential and none used 14. There's a reason for that.
Sponsored much?..
@SuperVassarBrothers
Жыл бұрын
I wish. Perhaps one day we'll have a sponsor. In which case, we would disclose that information.
Size matters dont believe the lie
@SuperVassarBrothers
3 ай бұрын
Hahaha, indeed