Helpful, polite, gracious young man. No cursing? Imagine that!!!!! Boom!!! Thumbs up 👍 for you. Well done. All the best to you , God bless you

@OutdoorOutlawsNC

3 жыл бұрын

He definitely dropped a few f bombs 🤣

Ah, a relevant youtube recommendation and an awesome video. Unfortunately the grid heater for me is precious in north dakota.

@B.C.EpicExplorer

3 жыл бұрын

Grid heater re locate kit offers better flow but a performs the samr

@markbroad119

2 жыл бұрын

I didn't really get what you gain. A little more air? Using less electricity that Greta made as its running?

@williamspohn3652

2 жыл бұрын

@@markbroad119 yes you get a larger opening in your intake putting less turbo drive pressure and feeding the turbo plenty of air. You know how diesels love more air. This mod will also allow your turbo to spool faster.

@jagg5474

2 жыл бұрын

@@B.C.EpicExplorer where can I get one of those

@B.C.EpicExplorer

2 жыл бұрын

@@jagg5474 gdp $399.00 Goes on cold side charge pipe.

Great seeing u at 18K subscribers!! I just started watching you and saw you thank everyone when u hit 2K and I thought right away that u would be at 20K soon. In Longs SC with my first Cummins (2019 Ram 2500). And omg Rudy’s Diesel !!! Been using their stuff for 15 years for all my F350’s. I was in Northern NY until 7 yrs ago. Never had 1 problem with any of them including 6.0 and 6.4’s!! Thanks again. 👍✌️

i never knew what the voltage dropping in the cold weather was coming from, made me think my alternator was going bad, thanks for the info👍🏼

@LordFalconsword

2 жыл бұрын

I always thought it was the def heaters. Good to know.

The grid heater delete is necessary. I just had my inside connection short out and melt. My mechanic said he touched the end of the bold and it fell off in his hand. The nut loosens off over time from all the hot and cold cycles and eventually falls of into the engine if it’s not caught in time. I live in Canada so I replaced the stock equipment with BD diesels intake horn, delete and intake heater probe.

I was going to buy a common rail . There so nice especially mega cabs. Considering im my own warranty , parts replacement is so much more on them. Then the emissions stuff. Like injectors cost 10x the price and my model came stock with no emissions equipment not even a cat. I settled on a 01 quad cab from south carolina with a blown motor and had the motor rebuilt. Considering im from Connecticut people are shocked when they see a 2nd gen without rust. I added injectors , exhaust , programer, turbo and working on a set of compounds now. I truly love my truck.

I am diesel FNG and I really appreciate how you explain stuff. It makes sense to those of us that haven't been indoctrinated. Appreciated! Keep it up! =)

Great video bro thank you I just got a 6.7 and tomorrow I'm checking it out bless

This is my first vid from your channel! Just gotta say you earned a subscriber man! Great vid and I’ll be sure to watch all of your other helpful vids as well. Sweet truck by the way!!! 😎

@EVERYTHANGDIESEL

6 жыл бұрын

Everardo Balderas thanks man!! Glad you enjoyed the video! Hopefully you find more helpful content thank you again

Great truck, I have a 3500 2009 with many mods, there's a bunch of simple mods that will give you power, but I'm surprised about the billet intake plenum with the grill delete, that one is a hard one to find,, good thing that you did the air horn, the plug un the rail too, another mod is 5 inch straight pipe, is cheap and gives you low EGT and a nice sound, then AIR DOGS or FASS fuel pump system with the sump pump adapters, this is a major upgrade, clean fuel, air free fuel, high volume and high pressure using their fuel lines, easy to install with a empty tank, keep the good job

I just picked up a very low mile 2017 2500 thanks for the info,love the all white of your truck looks sweet!👍🏿👍🏿

Excellent Vid Bro! I miss my Cummins. I'm going to pick another one up soon!!

@EVERYTHANGDIESEL

5 жыл бұрын

Thanks man! Glad u liked it!!

I appreciate this video, I just changed out my turbo actuator, went the cheaper route this time. I will definitely have to get after that crankcase filter changed soon.

I thought that unfiltered intake turbo air was a death sentence. Grains of dust at high speed 'sand blast' the bearing and impeller. I'm going to be a new CTD owner so just trying to get the straight goods. Awesome video - thanks for sharing.

Just picked up my all stock 08 6.7 G56. I’m in NC as well! Great video subscribed! Can’t wait to get my deletes done

What's up bro. Your video/videos were some of the first videos I watched for my 1st diesel (6.7 2008 2500). I appreciate it 👍.

Great channel! I have a 3rd gen too. It's great to see what you've done and how you did it! Thanks!

@EVERYTHANGDIESEL

5 жыл бұрын

Thank you man! Thank you watching my videos! Glad u enjoy them! Stay tune for more stuff man!!

I'm about to buy a 2008 Ram 5500 with a 6.7. but I've worked around them for a few years now and I wish I had found this vid like 5 years ago. All three of these that you suggest to delete I have actually replaced. These mods would have saved me several hundreds of dollars. Thanks and keep up the good work!!

@EVERYTHANGDIESEL

4 жыл бұрын

Thanks man I appreciate it and atleast u found the videos now man welcome!!

Very informative and professional video man, no useless babble! You’ve earned a subscriber.

@EVERYTHANGDIESEL

3 жыл бұрын

Thanks bruddah I appreciate it!!

You seem like the kind of dude I'd enjoy working on a truck with. Thanks, Everythang Diesel. Subscribed

@EVERYTHANGDIESEL

5 жыл бұрын

thanks brother i appreciate the comment! welcome to the family man i got tons of content on here with weekely uploads!

@EVERYTHANGDIESEL

5 жыл бұрын

also make sure your following the channel instagram for 1st dib sneak peaks for the truck and channel

I put in a BD exhaust manifold in my 6.7. It’s a two piece with a 47% increase in exiting exhaust. I noticed an immediate response in my acceleration rpm’s. The exhaust temps seem lower too. I called them directly before I ordered it and what a breath of fresh air they are. They run diesels and know them!

@EVERYTHANGDIESEL

2 жыл бұрын

Yea bd makes excellent products! I loved there steering brace I had on my 3rd gen

I have the same motor in my ram 3500 in my work truck. I haul around excavators and pallets of concrete a lot so at 225k miles she’s showing her age AND the exhaust filter is clogged so whatever that is it sucks cause I can’t even go up the Houston ship channel bridge without the petal being almost to the floor. I met a guy who’s a delivery driver and has the same motor I do and said the same things your saying and he said he gets better mileage and it runs better after, so yeah man I’m glad you explained it cause he didn’t explain it very well. Oh and the exhaust filter to be replaced down here in Houston is about $2500 after calling four different shops. They said the dealer is selling that filter for $2,025, $3600 to replace it was the highest I’ve been quoted so yeah ha ha ha. I’m so glad this is a company truck

6.leaker psd owner here, but I'm loving these vids!

Love your vids brother! Much love from your diesel enthusiasts all the way from Southeast Idaho!

@EVERYTHANGDIESEL

3 жыл бұрын

Thank you man!!

Thanks for putting that together. Good stuff

You got my follow bro, great video. Just got a 21' 6.7 a couple weeks ago all stock as of now.

The blow black reroute mod I'm definitely doing that one. Thanks for the video

Thanks bro! Im gonna go get the stuff for that 3rd one right now.

Great content, love your video’s my man! Keep it going!

Really enjoy your stuff. On my first diesel...6.7.

Big thanks Man seriously appreciate how you explain things nice and detailed and to the point

Awesome video! Thanks. I just bought one and this is very informative.

Got same truck so glad I found your channel love watching the same stuff that I got in the driveway mine's gold though wish it was white but metallic gold on black is still sexy lmfao 2007.5 6.7 strong boys

Strong work growing your YT channel. You say in this video you are trying to get to 2000 subs, and now, a year and change later, you are over 10K subs. Awesome work man!

@EVERYTHANGDIESEL

4 жыл бұрын

thanks man i appreciate it a lot!! the channel has been growing strong man, got awesome viewers.

@krazyhuck8415

2 жыл бұрын

I'm new to deisels but deleting the warmer plate wouldn't that make it hard to start in cold weather

Love your channel dude! Keep up the good work! Love your truck also! Cummins is the best!

@EVERYTHANGDIESEL

5 жыл бұрын

thanks bro i appreciate the words of confidence!! thank you for watching.

Just found you on KZread. Love your videos. Just became a subscriber for life. Keep it up and God bless you

@EVERYTHANGDIESEL

4 жыл бұрын

thanks brother and welcome to the family man!!! glad your enjoying the content!!

Great video. I'm picking up a 2014 2500 cummins this Tuesday 12/20. 23k miles on it pretty excited for my 1st cummins. Always had powerstokes till now.

@EVERYTHANGDIESEL

Жыл бұрын

Enjoy man!!

Grid heaters actually reduce startup wear and really help the longevity of the injectors

@williamspohn3652

2 жыл бұрын

I feel the pros outweigh the cons. With a grid heater delete. If you live somewhere cold you can run a remote gridheater. Or get a block heater.

@afluffypinecone3577

Жыл бұрын

@@williamspohn3652 A block heater is great, but if you forget to plug it in you're fucked. That's why the grid heater and a block heater are standard equipment on diesel trucks up here in the PNW.

@jeremyfenix8078

Жыл бұрын

They also fall apart and drop a bolt end into your intake on the the 6.7. Banks makes a great kit to eliminate the stock one and still keep a heater there.

@Frindleeguy

6 ай бұрын

Turns out the grid heater bolt melts and will maybe fall in to piston 6 and brick your motor. $8000 minimum. @@williamspohn3652

Thank you so much!!! Cant wait to get to a state that doesnt hate deletes!!!

@EVERYTHANGDIESEL

5 жыл бұрын

Yeah man no worries it's nice cause then u can do anything lol

@dundonrl

4 жыл бұрын

Unless you plan on driving to states that look for visual parts that are supposed to be there and give you a 10k dollar ticket!

@bobby1970

2 жыл бұрын

Is Florida one of those states that I can get away with deletes?

Thanks for the advice bro!

Favorite truck channel.just bought my first diesel which is a 6.7 cummins

@EVERYTHANGDIESEL

3 жыл бұрын

Appreciate that man! Glad the content is helping

I live in northern Minnesota, grid heater is a MUST lol but where you love, I get it. That being said, great vid

Great videos man because of you I’ve done all the deletes to my 2012 6.7 Cummins

@EVERYTHANGDIESEL

4 жыл бұрын

That's dope man! Saving that money! Glad to hear my videos helping you out brother! Good stuff

@eltigrepeleador

4 жыл бұрын

I was going to pay a shop to do this here in midland Texas but just for them to the exhaust and just to disconnect the egr and not take it off was going to run me $2,500 but thanks to your vids I did it for free

Great video my man! I’ll be checking them all out! Keep It up!

Looking good watch out for the EPA.

Up here in Canada, you can delete them, you just have to make sure you plug the truck in when it's below -10C.

you do need that plastic part around the paper it seals the case to the vent pipe. Top $100 mods are -ccv delete -air intake - boost gauge

You are definitely my new channel brother man. Love every second of it. Gonna be back logging for sure. Mechanicing son of a gun. Thanks MB . Be safe in NC and Happy 4 Th

Love the channel keep em coming !

@EVERYTHANGDIESEL

4 жыл бұрын

all day man thank you!!

just bought 4th gen mega laramie and love it. had 2 2006 megas, one 3/4 and one 1 ton dually. traded them both on the 2017. All deleted, 20in fuels. was alittle concerned about moving to a 6.7 from a 5.9 but its all good. you were talking about transmissions, for the money i put a Jasper in my 5.9's with there triple disk billet converter and it was amazing. no HP regulations and 3 year 100,000 mile warranty with labor cost and its nationwide. they just came out with the 68RFE and it is a bad ass. tons of upgrades, check em out

@EVERYTHANGDIESEL

5 жыл бұрын

That's legit man. I'll check em out

@FYC1129

5 жыл бұрын

Be careful in what you do. I have a 2016 1 ton Laramie dually and installed a 125 gal aux fuel tank tie into the belly tank with a a electric solenoid and dealer would not cover the rail pressure switch when I started to loose power. Dodge is very picky when you change the truck in the slightest. Remember there is 100,000 mile warranty that is priceless with these trucks

Great. Video,Thinks. GOD BLESS Y'ALL

That a boy! Good video keep up the good work brother.

Definitely a beautiful truck bro.

Nice truck man! I've been looking at 6.7s now for about a year. I have a gas'er now, but here about two years I'm pulling the trigger to a 6.7 mega cab

@EVERYTHANGDIESEL

5 жыл бұрын

Brent Hoadley thanks ma. Once you get that megacab it'll probably be the last truck you buy Haha I love them

@charleshenson4183

4 жыл бұрын

Got me a brand new 6.7 Mega cab, Worse decision ever. These trucks are $ pits,plain & simple.

For the third mod, did you just pull the filter under the valve cover or are you recommending staying on top of changing it out? Nice video man, earned a subscriber for sure. Picking up my 09 in a couple weeks. New to 6.7 as a diehard 5.9 fan lol

Seeing your truck really makes me want to stop everything on mine, and start looking for a mega cab in a few months. I originally wanted to go for a mega cab for family purposes but my love for 2nd gens was too strong! Wish I could afford them both right now.

@EVERYTHANGDIESEL

6 жыл бұрын

pure panoRAMa bro I feel your pain. Haha I love me some 2ndgens but family reasons I went with mega cab. You can still do a lot with these. My only recommendations would be if you get a megacab get pre 08 so 06-07.5 that way you get a 5.9 cummins and will avoid the 68rfe unless you do manual trans then your good with 6.7. I wish I would've gotten a 6 speed manual if I could do it all again. It definetly took some time to get to this point and I'm far from done! Haha but I love your 2nd gen. I'm trying to find a 12 valve 2nd gen hopefully by end of the year for a track truck. I love 12 valves so simple.

@purepanorama8484

6 жыл бұрын

EVERYTHANG DIESEL I'd definitely want to keep it in the 5.9 family since I've been working g with a 24 valve already. I know theres some differences but for the most part I'd be more familiar with it overall.

@EVERYTHANGDIESEL

6 жыл бұрын

pure panoRAMa yeah man I know what you mean. It ain't that different working on the 6.7. I use to own a 6.0 powerstroke now working on that thing was annoying haha no room whatsoever

@purepanorama8484

6 жыл бұрын

That's why I would avoid a powerstroke or duramax until I know the diesel life a bit more. The cummins platform is far more user friendly and easy to learn on. Can't go wrong with that inline 6!

@EVERYTHANGDIESEL

6 жыл бұрын

pure panoRAMa all day man. I would mess with a 6.7 powerstroke they look reliable and there trans are strong lol. But the Cummins is it's at! I saw your newest video. I liked it. Gave you a thumbs up

Well done, I like the presentation...

Very helpful video. Thanks for the help.

Awesome informational educational video experience Y'alls

Good video man. Thank you

Man I have all those problems. First Cummins so I don't know much but I'm definitely doing all three of those

Cool video. Well done

Maan I have a 2018 Ram Dually, I also had a 17. I was runnin them doing hot shot. My 17 gave out in New Mexico because of the def system. That little mod you did and the explaining in simple understandable english completely explains how it all works. For 2 years now I keep hearing about deletes and I understood what it did but now I completely get it. Thanks keep it up!!

@EVERYTHANGDIESEL

5 жыл бұрын

Your welcome man glad I could help!

Great info bro!

North Carolina really is a beautiful place, nice truck man

@EVERYTHANGDIESEL

5 жыл бұрын

Thank you bro

Good information Thanks!!

Great truck and great video!!

Your videos are the only ones I can stand watching. You’re less talk and more action.

@EVERYTHANGDIESEL

4 жыл бұрын

thanks man means a lot to me

Good info, thanks, new subscriber from Gvl, SC

great video! good job

Looking to get a Cummins soon like the info you have

Nicely done sir! subscribed

keep up the good work!

Love the video. I have watched it more than once and shared it. Do you recommend the grid heater delete for both engines? I have an 08 6.7 and a 95 12 valve. I haven't really done much in mods yet. And is it Cali emissions compliant? Thanks bro!

From your newest subscriber, brilliant.Absolutely brilliant. I wish I could give more than one thumbs up.

@EVERYTHANGDIESEL

4 жыл бұрын

Appreciate it man!!! Welcome bro I got tons of content and videos explaining and showing how to do a lot of stuff!

@pgrant7688

4 жыл бұрын

EVERYTHANG DIESEL you do have tons of legit content, stuff that really works. Until now, I was afraid of screwing up my $60k truck. Lol.

Just a suggestion get you a hand held laser off ebay. Their very inexpensive and it would help you point out parts in extremely tight quarters. I really enjoy watching your videos. Thank you!

Good info, man. Thanks.

@EVERYTHANGDIESEL

5 жыл бұрын

yeah bro no worries!!

Great explanation. I'm learning more

@EVERYTHANGDIESEL

2 жыл бұрын

Thats what it's all about

I recommend a velvet body upgrade my 68 rfe is a 100% better I also did the thermostat delete and I also plan on getting the co-pilot for the wiring harness. That will increase my total capacity big time

Banks idash and pedal monster. I’m working on intake horn and air box, exhaust.

Great video bro

Great video ! Thanks for the info

@EVERYTHANGDIESEL

3 жыл бұрын

Glad to help! Thanks for the support! 💪🏽

Yea my 4th gen would go right with the lights dimming and everything when cold started. But live in Canada

Love the vids

That truck is gorgeous

@EVERYTHANGDIESEL

4 жыл бұрын

Thanks brother!

Great video! Thank you 🤝

@EVERYTHANGDIESEL

3 жыл бұрын

Thank you! 💪🏽

Love ya bro keep it going keep it real

@EVERYTHANGDIESEL

5 жыл бұрын

Thank you my friend! Will do

Great video bro. Make sure you explain if you live in Cali you can't do the CCV mod. Unless you put it back together before smogs. Thats what I do with the EGR delete. I blocked my air tube and bought a spare and unplugged all the egr sensors.

@EVERYTHANGDIESEL

6 жыл бұрын

The Morales Adventures thanks for the tip man. I dont like mentioning certain things like that cause then I dont want epa coming after me for conspiracys lol

@jasonhutchinson5177

5 жыл бұрын

Great comment for the Cali peeps

thanks dude. i just picked up a 2008 dodge ram 2500 today and i was wondering what that hose was dangling by the front axle.

Great information

Cool you have the 4wd twin of my truck. Fraternal twins cause mine is 2wd but outside of that they look the same. I've got some plans for adding some stuff to mine as well. See what time and money allow.

@EVERYTHANGDIESEL

5 жыл бұрын

Hell yeah man. Good luck bro! I like your taste lol

Yes finally a channel around a mega cab 👍 clean truck I dig it

@EVERYTHANGDIESEL

6 жыл бұрын

Kevin Wade thanks man!! Yeah there isnt a channel with a mega cab build 3rd gen that I've found other than mines lol I just noticed that. Thanks man for watching my videos

@williamjarmon7406

6 жыл бұрын

Sorry to break it to you but Greg A beat you to it with two 3rd gen megas

@EVERYTHANGDIESEL

6 жыл бұрын

William Jarmon so who gives a fuck. It's my channel

@williamjarmon7406

6 жыл бұрын

EVERYTHANG DIESEL look at your comment to the other guy saying there isnt another channel with a megacab build and i was stating there already was one that had two of them on it and you wanna get all butt hurt so good for you

@EVERYTHANGDIESEL

6 жыл бұрын

William Jarmon it's all good I'm far from butt hurt just saying everyone who watches my videos most likely knows greg a and knows he featured 2 megacabs on his channel. No offense taken lol

Great video. Where did you get the blue coolant line (the one attached to the bleed vent)?

Love it! Thnx Bro; I need the Heater for the Cold weather up here in Canada but the other two im doing for sure....

@EVERYTHANGDIESEL

4 жыл бұрын

Your welcome man! Rail plug and ccv definetly good mods

One more mod that will extend your engine life is an oil bypass system . A little pricey but well worth it . There are many companies that sell them . Semi trucks have been using them for years and that’s how they get a million miles on there engines

I gave you a 👍 I could be wrong but on the last mod with the crankcase hose I believe that the purpose that is there is because of the blow by around the Pistons, if you build too much pressure in your crankcase your gaskets will begin to leak. So it Cycles back into your upper engine to be reburn and exit out the tailpipe relieving crankcase pressure. But I am surprised to hear that they run it back through the turbo since the turbo is very fragile and even little drops of oil or debris will damage the turbo 😕 My motorhome has a 2001 8.3L Cummins as far as I can tell looks like the previous owner did a modification and on the crankcase hose I believe they have it running down the engine into the open to relieve the crankcase pressure lol. I'll have to confirm that but that's what it looks like.

@EVERYTHANGDIESEL

5 жыл бұрын

Yes because there is a diaphragm on the valve cover behind the breather hose. Allowing it to vent out will help relieve it. Blow by on my engine is very minimal. People are 50/50 on the hose going to the turbo. Half think it needs to be there other half dont. All I know is once a 2nd gen swap is done there isnt even a option to reroute it.

@mikeblackford994

5 жыл бұрын

Not having performed that model (I believe) is why the engine brake feature of of my VGT went out. Engine brake worked great slowing down 16k 5th wheel down mountain passes out west. Screwed without it.

@EVERYTHANGDIESEL

5 жыл бұрын

Yeah those vanes get stuck pretty easily and are expensive to replace. My brake worked fine on my truck no issues before removing it. I still miss it though sometimes.

You all going find out later on that you need keep the air for the turbo clean as possible. Dirt kills a turbo, I've run over the trucks 26 yrs. We also run pulling tractor, CLEAN air CLEAN air for turbos

@alejandrogallegos8878

4 жыл бұрын

Hi

@Daniel-jk9ge

3 жыл бұрын

How do you clean it ?

New to your channel. Good job. Shoot out from CLT

@EVERYTHANGDIESEL

6 жыл бұрын

Dana Reynolds thanks man! Thanks for checking out my channel!!

Guess I can’t do that one moving to Fairbanks Ak But great video

Pretty truck man I just picked up a 08 Cummins

@EVERYTHANGDIESEL

3 жыл бұрын

Thank u man same year as mine