▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next = 5 Tools Under $30 Every Woodworker Needs - kzread.info/dash/bejne/rIGqrZezqdvXoaw.html Tools In This Video: DFM Small Carpenters Square - amzn.to/40qMSXK Kreg Set Up Blocks - amzn.to/3lLTQra Alternative to Kreg if Sold Out - amzn.to/3JPaEFP Gripper Push Blocks - amzn.to/3TOApL4 Whiteside Router Bit Set - amzn.to/3ZsDWQi Incra V27 - amzn.to/3KfZb3B DFM Tiny Square - amzn.to/42OUFQU Thin Rip Jig - amzn.to/410aiDp Alternative Thin Rip - amzn.to/3lSs8Jp Magnetic Trays - amzn.to/40Iv764 Mixed Sizes Magnetic Trays - amzn.to/3zbYWA8 Carter F-A-S-T Fence Alignment Tool - amzn.to/3lGoJ0o Right Angle Drill Attachment - amzn.to/3ZkqRsd More Tools I Love Under $30! Massca Dowel Jig X - masscaproducts.com/products/dowel-jig-x?aff=3 Flush Trim Saw - amzn.to/3V0C2om Foldable Dovetail Saw - amzn.to/3EjoihA Rockler Router Set Up Jig - amzn.to/3ECXDO4 Organizer Trays (Gray) - amzn.to/3Gjh5kp Organizer Trays (Black) amzn.to/3AkTHPD Fastcap Tape Measure - amzn.to/3X7qaCC DFM Saw Height Gauge: amzn.to/3jidia1 Spring Clamps: lddy.no/1575h Clamping Squares: lddy.no/1575g Small F-Clamps: lddy.no/157u9 (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

While I do enjoy learning about tools and such, it seems your channel has become a tool hawker verses a woodworking channel. I'd like to see more builds and projects.

Personal Experience: I had this sander for years, used it occasionally for woodworking proyects until I started a wall texture business where it was my primary sander for many many projects sanding microcement walls for HOURS. It’s unbelievable reliable. After a while I upgraded to the bosch 6” sander “rotex” and the little B&D is still in the shop working flawlessly.

Will be putting these on my wish list for gift ideas. 👍🏻

Awesome!!! Thanks For The Heads Up!!!!!!👏👍💯👊

Totally agree on the whiteside bits, they are awesome and affordable. They really stepped up my router game. This is a really solid list. Thanks

Incra makes really nice tools, I have a couple of measuring rules and use them everyday. The DFM tools are awesome too.

Glad I saw this. I bought the Dewalt right angle driver. At one point, I needed to get into a really tight spot. I had to just use the bit itself. This driver does NOT allow the top of the bit to stick out enough to get a good hold on the screw. I purchased the Milwaukee right angle driver and it allows the entire head of the bit to stick out when you only can use it without the bit holder inserted into the driver.

Great list Matt. Thank you my young friend.

@731Woodworks

Жыл бұрын

Glad you enjoyed it

Love the tools that you showed you also was great showing how they are used .I'm a beginner and would love to be able to test the tools that you showed .they look so simple to use and will be getting the bits and trying the clamps and the jigs and the router end round jigs thanks. Learned alot😊

that little square is pretty cool.

Matt I got my thin cut rip guide not to long ago. That thing Is awesome an well made.

Have seen a few of your videos and just getting around to subscribing now. Love the content and had to look up the story behind your name 731 woodworks, because you picked my birthday :) Very cool to share the date with your anniversary and channel name.

Yes, good idea.

Adding all these to my cart right now lol

great video as always thanks for sharing

@731Woodworks

Жыл бұрын

Thanks for watching!

@sflagg0817

Жыл бұрын

I actually have some of those the kreg set up bars, the right angle bit, and one other piece you were right about the thin rip guide lol I Wen to buy and it was unavailable but there are other options

Starting to feel like Bent, Katz, and others that are more salesmen than WWing. I don't even sub to those anymore. I youtube to escape commercial TV. Please go back to the roots of this channel. Apologies, but I'm just being honest. I find you really likeable.

@scottcountryman6090

8 ай бұрын

This is so important!! We need to let creators know that we are not ok with these infomercials

@ThegratefulC

5 ай бұрын

As a beginner myself I definitely appreciate these type of videos because I don’t want to waste money on woodpecker but I see where you come from

Excellent video

@731Woodworks

Жыл бұрын

Thanks!

I made my own thin rip jig and it's great to have. I had a little wheel bearing left over from a different project, and I borrowed one of the miter track lock-down thingies from the feather board I'd made, since I won't be using both at the same time. It filled an immediate need without waiting for Amazon or spending a dime, but the store-bought one could be worth your dime and time -- this jig can be really useful.

You've hit the Jackpot with this one. I need all those tools.

@731Woodworks

Жыл бұрын

Thanks Ancient Tom! They are all nice tools for sure.

All good stuff and well delivered.

I love these videos! The way you explain how you use these tools helps me develop how they would work for me in my shop. Thank you sir!

@731Woodworks

Жыл бұрын

Glad you like them!

Right angle attachment is da bomb!!! Awesome list Mighty Matt.

I have just brought the evolution R210+ sliding mitre saw, the set up of the blade was on target!! 89.97 degrees right angle, l have been impressed, fitted together very easily, with extras' saw stops, clamp's bought off Amazon, the blade only tilts on one side, that's the only downside, the mitre saw turns left and right, l will be changing the blade for a wood blade 60 tooth + but l will keep the multi-blade that came with it, l do not saw metal, masonary or plastic but it might at some point come in handy. It is a Bargain choice £156, a good DIY tool [semi-pro] without breaking the bank.

Great content. Love it

@731Woodworks

Жыл бұрын

Appreciate it!

Love these videos. I have all but three. Og the items shown. These videos have been invaluable to me as a set up my shop and continue to learn

@731Woodworks

Жыл бұрын

Great to hear Nick! Thank you.

Your channel is all I need to watch. I've learned so much from you. I love you mate. I also love your smile. 😊

@731Woodworks

Жыл бұрын

Thank you Aaron

Hey Matt, good morning. I watched your outta time video. I'm up early this fine Sunday to get started early. Love your content and feeling inspired. Thank you.

@731Woodworks

Жыл бұрын

Awesome! Thank you!

Those little magnet trays are also going to be awesome in my sewing room as well as in my tool box

,a cool video keep up the great content.. Thank you……

@731Woodworks

Жыл бұрын

Thanks, will do!

@magicworldbyjorg

Жыл бұрын

@@731Woodworks Thank you very mutch... have a nice day.... see you….

My bank account just whimpered a little... 😂

@731Woodworks

Жыл бұрын

😂

@MR-si1eq

Жыл бұрын

Ditto 😂😅😂😅

@731Woodworks

Жыл бұрын

@@MR-si1eq 🤣

Great tools! Well done!

@731Woodworks

Жыл бұрын

Thanks! 👍

Illi noise😂. All good!

I'm trying to find a decent square to square up my tablespoon in my sliding mitersaw. Does anyone know if this is a good square to use

I have whiteside bits. They are AWESOME!!!!!!!!!!!!! the thin rip jig is unavailable as of today.

May I argue a minor point? The Carter band saw doodads look really useful for setting the fence distance, but isn't the tooth clearance groove only for use when checking the fence for parallel?

@MrSpzwd

Жыл бұрын

Seems like if you use the recess the way it was shown you're measuring to the center of the blade which will result in a rip off by half a kerf width.

Like always, enjoy your video!

@731Woodworks

Жыл бұрын

I appreciate that

Apart from those sexy Harvey saws, I've never seen a table saw come with a good miter gage.

Great tools

I got the Incra V27 last year and man, what a difference. I added a Powertec extruded aluminum fence that has T-track all over it and a scale across the top. I rarely use my cross-cut sled anymore. I have the Woodpeckers Delve square and the little square and while, yeah, I spent more than those DFM squares go for, I too use both of them all the time. To anyone who doesn't have either of these squares, get them. Woodpeckers, DFM, whatever, you will find them to be one of the handiest tools in your shop.

Where do I find these "tubafors" you're always talking about? I got a set with the DFM Triangle and Square as a factory second recently. I'm not sure what's wrong with them since they look just like the regular ones and are square, but you might keep an eye out. I use the Grr-ripper push blocks, but I also like the drop foot style on the Milescraft GrabberPLUS. I think it's good to have a wide variety of push blocks and sticks. As for the magnetic trays - I recommend circular ones instead of rectangular. With the rectangular the magnet does not fill up all the space of the tray and if you use them hanging off of a wall you are likely to drop screws more often.

@731Woodworks

Жыл бұрын

Tubafors are 731 exclusives 🤣

Have you found a straight edge ruler in the 36" - 51" range that is flat and affordable? Amazon reviews tend to high light significant gaps between the straight edge and flat surfaces.

Saludos muy buen video 👍

I just got the Johnson 4in square it's literally the cutest tool I own now 😂

This is going to be interesting

That dfm square and the little L shaped one are used daily in my "shop"

@dfmtoolworks

Жыл бұрын

Thanks Tate!!

Nice info.

Do the Kreg setup bars have an advantage over standard brass setup bars? At least enough of an advantage to justify the price difference? I'm seeing $85 vs $22.

@731Woodworks

Жыл бұрын

Powertec has similar ones for only $33 today. I posted it in the community tab of my channel today. They are nice, and "faster" but brass ones work well too

@aaronhynes4907

Жыл бұрын

Thank you!

I’d like to try those Whiteside router bits. I’ve only used Bosch and Skil bits. I’ve never had too much of an issue, but I do see some burning every once in a while. I’d like to see what difference those type of bits actually make

@731Woodworks

Жыл бұрын

You can stop a lot of the burning with the right speed settings too on the router. Or the feed rate (or both) that you push the router through the cut.

@markvasko2531

Жыл бұрын

You definitely can't go wrong with the Whiteside bits.. my bit collection is 95% Whiteside, I have a couple cheaper brands, but the Whiteside are amazing quality.

Bought the Incra miter gauge about a month ago and it is as advertised. Super accurate, built solid, and affordable. No brainer purchase to replace the inevitably shitty gauge that came with your table saw.

00:51 i·luh·noy The S at the end of Illinois is silent.

Great demo of tools! The wife is gonna get me because now I must buy more “Matt” tools! 😂🤣😂👊🏽

@731Woodworks

Жыл бұрын

😂

What’s a Tuba 4?

Great video! Your phillips bit was stripped all to hell though!

Hi guys for 1st time buyer of table saw which one better to have? SKIL 10" table saw or Dewalt 8.25 table saw

@731Woodworks

Жыл бұрын

I'd go with the Skil 10 inch if you have the room. You'll appreciate the bigger blade.

@edwindalisay8618

Жыл бұрын

@@731Woodworks Thank you

Hey woodworkers, Matt. In Canada we pay through the nose for tools, DFM square $72.20, wow! Nice little square but come one! Every tool on your list Matt is pricey. Im curious what Id pay in the US? Thx

@731Woodworks

Жыл бұрын

We get free shipping through Amazon if you have Prime. Otherwise it's only like $6 to $10 shipping

where did you get your phone stand

There is no noise in Illinois

How are you doing? I like your videos on tools to use and buy and would like your opinion on what I I have been watching these videos shorts of a company I believe called stealth mounts. I’ve seen the stealth mounts tracks, 90 Tracksaw Square, demo and tool holders. Can’t find the company anywhere or any other videos. Other than the shorts which doesn’t give me much could you or would you do some research on this company?

@731Woodworks

Жыл бұрын

I'm not familiar with that company.

@noldwolf1

Жыл бұрын

@@731Woodworks there is those short videos on KZread several of them could you re-searched him

@noldwolf1

Жыл бұрын

@@731Woodworks there is those short videos on KZread several of them could you re-searched him

I thought Swanson was the go to for squares.

I got a ryobi table saw for my birthday(i had just started woodworking) and the fence SUCKS on those. I quite literally need to use the miter gauge for all my cuts. I personally prefer the Powertec brand miter gauges as I know the owner of the company so its much easier to test products.

Do these tools have metric measurements? Don’t know if you know this but not everyone lives in America

😂 hoping some of this stuff is available in UK 😮

Love the videos and the tools. One clarification. It’s not flush trim, a.k.a. Pattern bits. Flush trim and pattern are two different things. Bearing on the end is flush trim, bearing between the cutter and the shank is a pattern bit. I’ve been in production shops where the clear communication really matters.

That right angle driver attachment though *heavy breathing* 😳😳😍😂😂

@brucehansen7949

Жыл бұрын

One of the handiest tools a guy can have but it doesn't exactly eliminate frustration cuz typically your driving in a screw in a tight corner and difficult to do, 2 hands required

Was that chisel out of square? Just messing with ya; keep up the good work.

Hey brother, just stumbled across a couple of your videos and noticed the Trooper plate and handcuffs in the background. I’m a retired Louisiana Trooper 25+ years.

@731Woodworks

Жыл бұрын

Thank you for your service! I resigned after 13 years as a trooper from the Arkansas State Police to do this KZread full time.

@ronaldtardo1314

Жыл бұрын

@@731Woodworks Right back at ya! Good luck to you. Just subscribed.

Howdy Mr. 731... Great video!!! Question: With that first tool, the square, do those pegs come with it? Also...and totally off subject. Watching this video literally gave me a flash back. I mean really, I was stunned. In my mind, I always wondered what it was about you...your looks, your words, your mannerisms...something just always kept me tuned in with what you were saying. Well, it FINALLY dawned on me and I mean it was a ton of bricks that hit me. Back in High School, I excelled at 3 subjects. Woodshop. Math. Science. Straight A's. Was just natural to me. """YOU""" Sir Matt are the spitting image of my FAVORITE Science teacher. His name was Mr. Button. 😊 I mean, yall 2 could be brothers, though he's probably twice your age now. I believe it was Physical Science, the science of how and why things work. He made that class fun. He was a bit goofy but serious at the same time. He covered up the clock on his classroom wall with a piece of paper that read "Time to pay attention" (we didn't have cell phones back then, you wore a watch). THATS why I relate to your videos so much. You make things fun and interesting, just like He did. It must have been embedded in my physique and only just now did I realize it. Wow!!! Flood of memories. Thanks Matt!!!

@731Woodworks

Жыл бұрын

Ha ha Mr. Buttons! you can officially call me Mr. Buttons from now on! That's great! Yes sir, the silver pegs come with the square. 1 with the small carpenter square and 2 with the mini square.

😂 I ran into needing a 90 degree attachment 5 times the past week. You ain't kidding about the frustration. 😂

I hope you and neighbors have avoided tornados and other storms

@731Woodworks

Жыл бұрын

Thank you Ken. Yes we have, they were all well north of us. Little Rock area got hit hard

I just wish these tools were available in metric.

I wonder if the incra v27 will fit in my craftsman tablesaw mitre slot

@731Woodworks

Жыл бұрын

If it has regular slots it should.

@drunkenirishmstr

Жыл бұрын

@@731Woodworks, thank you for the reply!!! the slots on my craftsman are like the ones on a rhino tablesaw. The mitre slot has tabs, I read the reviews and the Q&A’s all were vague and unconvincing. I may just buy it anyway and try it. If it doesn’t work I can just return it I guess.

I found a larger magnetic tray at the auto parts store that is great for my wrenches and loses screws etc... Store name starts with an "A" and ends with an "E".

@joelfouse

Жыл бұрын

This is also one of those cases where "Harbor Freight works just fine". You can find them in the section with auto body, wheel chocks, creeper trays, etc. 👍

6:27 nice driver bit

@731Woodworks

Жыл бұрын

that's what happens when you use em

@sweetsweetpapa

Жыл бұрын

@@731Woodworks All of the DeWalt Impact-rated bits I have look exactly like that, but none of my Makita, Bauer, or Milwaukees do. The DeWalts aren't shaped to fully seat or engage with the majority of phillips heads. Oddly enough, DeWalt's regular bits are actually much better.

@731Woodworks

Жыл бұрын

@@sweetsweetpapa I have Milwaukee bits as well and they do seem to hold up better. This Dewalt bit is a couple years old. I should probably trash it lol

Thanks, but as a native Illinoisan, "there's no 'noise' in Illinois", please.

Saw that Monticello AR sign. That's our old hunting grounds. You from AR? Conway LR area here

@ugaladh

Жыл бұрын

I believe he said so in one video.

@731Woodworks

Жыл бұрын

yep, live in Monticello.

@michaels775

Жыл бұрын

Nice. Work in a custom millwork place out of LR. Love your tips, man. Use a lot of them around the shop

👍

I hope you came through the tornados without damage or injury. Looks preey bad out your way!

@731Woodworks

Жыл бұрын

We did. Thank you. It went well north of us. Little Rock and east of them got hit hard

@russmartin4189

Жыл бұрын

@@731Woodworks That's a relief. Could you imagine your entire life and KZread business turned upside down in a minute by a tornado? I couldn't. Out here in NY, 70 miles north of New York City, we rearely get weather events that are devastating. Superstorm Sandy was the last one, but only for people in low lying areas. When I was young, and we lived in an apartment near a river that almost got flooded, I learned a lesson. "Never live by water that can flood". A couple times we had small tornados that took down some trees, but that was all.

Ask yourself WWJD? He'd use the metric system, that is for sure.

@LawDawg717

11 ай бұрын

Freedom Fractions got us to the moon and back.

What fence is on the bandsaw?

@731Woodworks

Жыл бұрын

It's the one that come with the Rikon

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

These tools are nice, but i am from europe so i dont understand the mesurements. I would need it in cm or mm😢

@dfmtoolworks

Жыл бұрын

We have them in mm on Amazon or our website

@731Woodworks

Жыл бұрын

DFM has them in metric

@matygaming435

Жыл бұрын

@@dfmtoolworks thanks

When ripping thin strips why dont you do this.....make the first rip then take that piece and put it between the workpiece and the fence. Now the workpiece has moved by the width of the thin strip so the next rip will result in an identical thin strip. Repeat til you have enough strips.

Hot garbage😂😂That's absolutely true. Tossed mine and bought a QUALITY Jessem miter gauge. Yes Sawstop would be better off just not shipping that POC OR hook up with Jessem and supply a quality miter gauge along with a quality saw. IMHO

@731Woodworks

Жыл бұрын

I like Jessem tools! They make great stuff!

What’s a tubberfoer?

@731Woodworks

Жыл бұрын

You must be new here. Welcome. It's tubafour.

I alway measure to the blade tooth not the smooth part. Using the tool with the groove in it on the bandsaw is going to make your workpiece undersized.

you need to throw out that #2 phillips bit at the end. that is the source of your frustration trying to drive screws.

That square got slightly short on the piece of wood at the end.

Thank you for sharing The Story. It answered a lot of questions I had about God and why Jesus had to die. I have been rescued.

@731Woodworks

Жыл бұрын

Praise the Lord!

01/25/2024- $513.70 for all 10 of these. Just posting for posterity

Great video of good tools to have. Please be aware of when making videos of how to use tool like your centering square. Your hand is blocking the view of what you are doing. I am a big fan of your videos though. They are always well done.

@731Woodworks

Жыл бұрын

noted Gary. Thanks for the feedback!

I’ll tell ya, anytime I’ve watched one of your videos and clicked a link to buy, it’s USUALLY already sold out! Amazon should be paying you a stipend for driving serious sales… and yes, my bank account just rolled its eyes and sighed….

why do you make thumbnails to your videos similar to mr beast? the o face is kinda played out dont you think?

@731Woodworks

Жыл бұрын

I went to your channel to see how I was supposed to do it. Didn't find any videos there.

@LawDawg717

11 ай бұрын

@@731Woodworks Do you have any recommendations for a good burn cream?

Perda de tempo assistir esses vídeos com produtos da Amazon. O produto em si já não é barato mais impostos e frete quadruplica o preço. Um pequeno esquadro que custa mais de $25 sai ao final por quase $100. Impossível comprar

@731Woodworks

Жыл бұрын

É porque você está em um país diferente do meu. Nos EUA, temos frete grátis (se você for um membro Prime) e os preços são diferentes aqui e onde você está. (traduzido pelo tradutor do Google)

@wilsonpenha6528

Жыл бұрын

@@731Woodworks Eu concordo plenamente. O problema não é seu e sim do Brasil. O que eu quis dizer é que para nós é perda de tempo esses vídeos. O que não acontece com produtos chineses e sites como Banggood e aliexpress por exemplo

You don’t pronounce the s in illinois my friend. Good way to make enemies with a lot of bears fans….

@Trilliagan4727

Жыл бұрын

I heard it

@731Woodworks

Жыл бұрын

🤷🏻‍♂️

@bgode9013

Жыл бұрын

Geez!! People are way too sensitive these days. Enemies really?

@sbffsbrarbrr

Жыл бұрын

Bears fans are tough. They have to be 😁. They'll get over it!

@bullencarker

Жыл бұрын

@@bgode9013 its a joke guy. Lighten up

Dude! You have to stop this. Do you know how much money I spend every time I watch one of your videos! 😅😅

@731Woodworks

Жыл бұрын

🤣

I need to stop watching your videos, my Amazon cart is getting out of hand 🤦🏾‍♂️

I like the gripper line, but. The green non-slip surface eventually hardens over time. The only way to fix this is to replace the tool. For a push block, these are not cheap.

When the green non-slip surface hardens the tools become slippers, not grippers.

All my friends say #tubafir now. It's great!