Join this channel to support Tested and get access to perks like asking Adam questions: kzread.info/dron/iDJtJKMICpb9B1qf7qjEOA.htmljoin Titanium Birdcage Fret Saw: amzn.to/43hBEqL Disclaimer: Tested may earn an affiliate commission when you buy through the links here.

@joshua.snyder

2 ай бұрын

Man, that saw is a bit spendy. Like 2-3 times what a good one goes for.

@saulteanuts-vg8iu

2 ай бұрын

The planet's ecosystems are dying for your overconsuming taker ways. Shame.

@saulteanuts-vg8iu

2 ай бұрын

You have too much. You are the problem. Reduce is the first R for a reason.

@saulteanuts-vg8iu

2 ай бұрын

Overconsumption will be the end of all life on this planet.

@saulteanuts-vg8iu

2 ай бұрын

Are you proud of your unsustainable taker footprint?

Hey, jeweller here with some info about the saw blades! Basically our rule is that you want at least three teeth in contact with the edge of metal at all times, this will eliminate the blade skipping and greatly reduce breakages. This means it's best to keep a few different sizes on hand for different material thicknesses and here's what I recommend. For

@louisbuckland

2 ай бұрын

Also another brand that I've heard jewellers swear by is Herkules but I haven't used them personally

@louisegrimhelm3041

2 ай бұрын

I'm an apprentice jeweller. My record is 8 broken blades in a day

@scarling9367

2 ай бұрын

Same in sheet metal. We've got to angle cutting blades to avoid jumping and shaking.

@markmaciag235

2 ай бұрын

@@louisbucklandI’ve been using Herkules White Labels for the last few years. No complaints. I’m buying Super Pikes next time around as I’m certain that they’ll be of top quality..

@venom813

2 ай бұрын

I also like to have a tube of blade wax within arms reach. I have a stick of RioGrande's Burlife that always comes out with my jewelers saws.

Adam's capacity for remembering the names of seemingly everyone he's ever met, worked with, or interacted with continues to blow my simply human mind. I feel like that shows a true generosity of spirit

@iamzid

2 ай бұрын

i know right? i sometimes forget the names of people i see every day.

@the_original_dude

2 ай бұрын

he seems to remember A LOT of stuff with quite some detail. I wonder the effects of it on a person. Because I embraced the ability to forget, that way it's easier to learn and re-learn stuff, along with other benefits.

@nomadgrappler9410

Ай бұрын

I have had enough tbi's that i can barely remember my own name.

@Patrik6920

Ай бұрын

..I struggle with the opposite, thers ppl who i would like to forget...

@VashStarwind

23 күн бұрын

Name dropping isnt necessarily a good trait to have.

We need a video build of a rolling library ladder against the back 14’ wall!

@michaeljaques77

2 ай бұрын

I was going to write that but you beat me to it.

@BottleMakesStuff

2 ай бұрын

Exactly what I was thinking! As soon as Adam talked about the rear wall storage, I thought "that needs a rolling library ladder"

@amphicorp4725

2 ай бұрын

maybe even a prop replica or replica of a historical library ladder

@user-yu8ur9yi9e

2 ай бұрын

only if it comes with a little jib crane for those heavy tools that are never used on the top shelf

@DonWRJr

2 ай бұрын

@@user-yu8ur9yi9e I was thinking a ladder might take up too much of his room, unless he used a folding attic ladder that could roll side to side and somehow fold up, maybe on an I-Beam or something, and then I thought a gantry crane on an I-Beam and/or some insane way to hoist himself up to get what he wants, and also grab the heavy stuff up top

Hi Adam. I am the person who made the Master & Commander Belt buckle Steve Neill gave you. I an a jeweler.. As far as jeweler's saw blades go the Laser Gold from Rio Grande work fantastic ( a lot harder to break mostly ). Though I use blades from the absolute cheapest to the higher end ones, they all work great. Learning to hold the jeweler's saw as lightly as you can while rotating the piece as much as you rotate the saw frame is a good skill to try to develop. I might recommend getting some mid-priced blades in several sizes to try out as breaking them is how you learn to us a light touch. They run about $3.40 a dozen. The thicker the metal, the easier to break, but if you use a blade with too wide a tooth spacing it catches bad too. The blade choice should always be that the blade should have at minimum 2 teeth in the material. Yeah, I often use whatever blade is in the saw which isn't alway 2 teeth = thickness of the metal. And I sometimes use a blade that is waaay to fine in thick metal which leaves a nice shiny cut, but takes way more time and breaks more blades. You might find a saw blade size that can do most of what you cut. Then get a gross of that size for $20-$50 per gross. I would actually recommend this assortment with a standard small 3" saw frame and some Bur-Life lubricant. The BurLife is a must for thicker metals. When I say "a must" I mean much smoother sawing with less effort and less blade breakage. www.riogrande.com/product/laser-gold-saw-blade-most-popular-assortment-kit-pkg144/110328GP/?code=110328&_t_id=jP3VIJ6NCa9AJHP1_0K36w==&_t_uuid=0b3bae4d-584e-4603-a4f4-751246833d37&_t_q=saw+blades+saw+blades&_t_hit.id=Commerce_Products_Product/CatalogContent_50caea87-2307-47a3-bd55-5bb7324cf686_en&_t_hit.pos=11

@WilliamBlakers

2 ай бұрын

Adam needs to get the Rio Grande catalogues. Some very interesting tools in them.

@GmanInd

2 ай бұрын

I was going to suggest to Adam to lighten his grip on the jewelers saw. My grip on a jewelers saw is more like a pencil with thumb and two fingers than a full handed power tool grip. I like single row of teeth over spiral blades for most materials, especially grainy wood (soft). A spiral blade tends to follow the grain more while the back , non cutting part of the blade can be used to wedge the teeth into a grain or to control a cut by idling the material against the non cutting part of the blade and only lightly cutting the wood with part of the kerf, using the teeth on one side of the blade and not digging in and cutting too much, really good for sneaking up to a layout line after roughing out the cut. If one has a jewelers saw one should also have a saw stand, mine are "V" shaped, clamp into a vise and rise the work up about 10" above the bench, they look kinda like an inverted boot jack.

As my dad once noted: "The more 'things' something does, the fewer 'things' it does well"

@Pagliacci_Rex

11 күн бұрын

Multitasking is just doing multiple things badly.

Since Adam’s been chatting about things that are stored outside the cave, I’d love to see a tour of *that* storage. The duffle bags, the costume/project overflow, the m7 relics….

The Bosch hand planner that is in its box under my bench is happy to know it has friends lol

@jonathanwright5550

2 ай бұрын

Man they can move some material

@GmanInd

2 ай бұрын

I use my planers to shorten doors and straighten warped wood. It gets it done quickly. I have 120v and 20v versions, no matter what use two hands and clamp the work solidly. For doors the folding work tables with built in vise work great, for timber I chuck it in the bench vise.

@DeanRockne

Ай бұрын

They are very situationally useful and almost all those situations are home construction. Shaving down a door or eliminating a high spot on a joist. I'd never use one to replace a hand plane for fine woodworking or a planer for dimensioning lumber.

@5:55 the tool that scares me the most in my shop is the jointer. The table saw will gouge you or messily sever a body part. A jointer will turn whatever body part that happens to enter it into a reddish mist

@natec599

2 ай бұрын

I went in for a pre knee op appointment. There was a guy sitting there, in shock, holding his hand above his head. Asked what was up and he just said “jointer”.

@johngraham2335

2 ай бұрын

Well fuck. I just started using a Jointer. You guys are really helping my psyche.

@BarginsGalore

2 ай бұрын

but as long as your hands aren’t where the blades are a jointers fine. twist the wood a little in a table saw and it won’t matter where your hands are because there’s something flying at 40 mph straight into your face

@nitePhyyre

2 ай бұрын

​@@BarginsGaloreoh, and it might pull your hands into the blade as it launches wood at your face.

@egdm1235

2 ай бұрын

@@johngraham2335 Just keep your hands away from the spinny things. This is what push sticks/blocks are for. I feel better about the jointer than I do the table saw.

Hearing Adam talk about tools he bought and didn't really use makes me feel better

@Ktcsr17

Ай бұрын

I’m not a tool person but I love Adam and this makes me feel better about most things I’ve bought and never use 😂

For fine precision work, my go to is a file. The tiny thin file with the teeth on the side tend to cut faster than you think. That keyway wouldn't take that long.

**casually drops chatting with the guy who made the infinity gauntlet like**

I still dont have a clue what he's talking about when it comes to tools etc, but Adam is so amazing to listen to, his love and passion shines through and ita comforting and although I can't build anything that's more than lego I'm hooked on watching Adam making things. I have a genuine appreciation for makers.

Yup, I have a Ryobi hand planer that gets used once every few years. It works just well enough to not get rid of it.

For those who don't want to drop a ton of money on a high quality coping saw, consider a wooden bow saw. They can be very cheap and much stiffer than a cheap coping saw.

@1pcfred

2 ай бұрын

If you cut on the pull stroke coping saw frames do the job.

@insederec

2 ай бұрын

You can buy a $5 German style jeweler saw that is every bit as good as you'll ever need

@BarginsGalore

2 ай бұрын

@@1pcfredit works but it’s so much more of a pain

@1pcfred

2 ай бұрын

@@BarginsGalore I found the problem I had coping with my saw was the blades I was using. Better blades work better. I couldn't find better blades locally though so I had to order some off the Internet. Which was a pain, but I managed.

@z4zuse

2 ай бұрын

Stumpy Nubs recent video is about making a bow saw

Lmao. Love seeing Adam's thought process happen on camera. Talks about bees in bonnet behavior, later on (talking about the new saws potential to complete stalled projects), demonstrates bees in bonnet process activate...

Tips from a Shipwright legend Louis Sauzedde does amazing work with a ryobi electric planer.

@jabbas2560

2 ай бұрын

Yes. He is working on a replaca of the boat in the Jaws movie. At: tips from a shipwright.

Clearly a future project should be designing and building a rolling library ladder for the back wall :-).

A powered hand planer is a handy tool - but probably not as much in the venue you operate. If you were refitting old doors & double hung windows & such, it'd be a daily use item. For cutting in coping saws, if your saw can clamp bulk blade (without specialized ends), check into a roll of veterinarian's wire, sometimes called OB wire - it cuts a lot of things neatly and quickly, and you can buy it by a roll, giving you lots of options for size.

@RossReedstrom

9 күн бұрын

First time I've seen significant use of a powered hand planer was in the videos of Leo rebuilding Tally Ho - fitting hull planks and shaping fair lines.

I picked up a knew jewelers saw based off of your video with the makers, and I love it. Most of the accomplished jewelers I see mentioning a specific blade type say Herkules, but after I broke one I put in an unbranded german blade that came from some pack in a kit, and I cant say I see a difference. The "march in place, dont push the saw" tip was what has helped me the most.

@Tenneseejosh

2 ай бұрын

Get yourself a block of beeswax and rub it on the blade. Gamechanger.

My first thought was that Adam needs a rolling ladder for his back wall. Then I thought, he's a maker so it should be retractable. Then I thought, he's got friends so they should help him make it controllable with a remote. So Adam needs a double spring loaded rolling ladder that can first rotate from horizontal storage on the roof down to a nice 70 degree climbing angle. Then a second spring or pneumatic that can extend or retract the ladder down to the ground. And finally some system to control it all with a garage door opener.

@peterw8835

2 ай бұрын

I was thinking the same thing, rolling ladder, but then I thought about the tile puzzle and I think the ladder would more often end up in the way of moving other equipment around than he would access that Z+ materials.

Your monologue on the saw design aesthetics is very pure hearted and true. I hope they see that. What a compliment.

@Games_and_Music

2 ай бұрын

He had already put that video out that he was talking about, this livestream was from December last year, and he did mention the aesthetics and anodized colors.

Speaking of tools. When I first started watching Mythbusters, I had such respect for your talent that when I noticed you using a DeWalt drill, I started my tool kit with a DeWalt.

@Suiseisexy

2 ай бұрын

their mid-torque is actually top right now, Milwaukee Fuel stuff has been on top for a while but it seems like DeWalt wants back into the fight, they're outdoing Makita at the moment which is pigs flying. damn I want one lol.

I love the comment towards the end about attention to detail with regards to colours. Often overlooked, but if you know what to look for you can find many more of these small, deliberate aesthetics on just about every (what I would consider) artisan tool you can get your hands on. If you can make the tool do the thing it's designed to do fantastically, why spare the rest of the design from having the same attention to detail? This is what keeps me coming back to using some of the tools I have in my collection so far, and moreover loving to use them.

@DUKE_of_RAMBLE

2 ай бұрын

Off Topic... Is that the _Marathon_ logo as your profile picture... 😊 (the 90s video game franchise, by Bungie)

@KubeKraft

2 ай бұрын

It's actually the reclaimer logo from Halo! (you still got the bungie part right though!)@@DUKE_of_RAMBLE

@benmatthews6831

2 ай бұрын

I saw that, too! Such a great game series. It’d be great to have a ACTUAL remake.

My shop teacher was awesome, loved the pop quizzes on Tool Names The correct name for tools so satisfying

for high storage, get yourself a painter pole and make a hook that screws on the end. This allows you to hook small things dow from up high. This is how I handle many of my theatre lanterns that get stored in the rafters.

Picked up a little vintage table saw branded Jarmac some years back. Haven't used it beyond a few test cuts but I have always treasured big little plans for it.

Knew Concepts and Bridge City Tool Works both make beautiful, high quality tools. I also like MicroJig products, especially the FitFinder 1/2 Jig (amazing setup tool).

Those telescoping ladders are perfect for getting to high shelves in tight areas. Instead of having to wrestle a long extension ladder through a confined area.

Have we seen projects/builds using the benchtop mill?

Stumpy Nubs similarly just did a video about quality bow/fret/coping saws, and how most modern cheap coping saws are commodity trash that only serve to make us hate coping saws!

@johntonai4112

2 ай бұрын

I made one from the Taylor Tools kit he talked about. I gave away my old coping saw almost immediately. Huge difference in cutting accuracy

Here is an odd suggestion, a 2 poster vehicle hoist. I know the chances of a vehicle ever entering your shop are basically zero, BUT they are great for lifting left heavy, unweildy items to variable heights so you can work on them.

@inlangford

2 ай бұрын

Easier to install a ceiling crane on rails..

@vinnyt42allday

2 ай бұрын

​@@inlangfordMy exact thought. why take up floor space

@spacekb17

2 ай бұрын

Can the floor of his shop support this?

@azazeldeath

2 ай бұрын

@spacekb17 I've never been so cant say, as for roof crane, I would say its even more unlikely that his roof can support it, to cost to retrofit a roof crane when the roof can't support it is immense, we learnt that at my old shop. And a 2 post hoist takes up very little space, it's basically just the uprights and the arms which can be moved out the way. The only thing that would make it not feasible is of course if the floor isn't rated to it. That said he is very unlikely to lift something to its full potential of around 4 tonnes depending on model so it does have some leeway.

@ottopartz1

2 ай бұрын

A presto stacker lift is a great option for being able to lift heavy items to service height, or to get them up to table height and slide equipment on to a table. It's also built so that you can put it somewhere out of the way with the feet rolling under a table or something else that has a gap on the floor.

Over the last year I've been taking jewelry making classes intermittently with my comp sci work and have fallen in love with jewlers saws. And it totally just made my day to see you have this new appreciation. Never grow up Adam.

Adam - You made my daughter's day down at the Planet Comic Con in Kansas City. She was a huge fan of Myth Busters in her teens!

Engineering / Design Challenge: How about a rolling library stair to access the Z-Space?

Wouldn't some 'library-stairs' make sence to get into your back-cupboards on hight easier? I wish I had this hight for storage in my little shop.... literary constantly moving thngs around to use one tool and then move all things back to get to the next part of the work. This week for example I needed to cut something on the little tablesaw... so I put my saw together, up from the back of the shed. When I started it, the axel in the motor-unit (drill-machine) was not turning well, so I needed to move a lot of things to get to my welder.... then repair that, get the angle-grinder and things to make it work...put it back on and put the saw to action, and move the welder back for that... One cut (I now made 3) took almost a day this way... and now the saw can be taken apart again, boxed up and put back where it was so I can use my lathe again...

Like you, I discovered the value of the jeweler's saw late in life. I love the spiral-cut blades sold through Rockler. I have a variety of them in various tooth counts and diameters. I have four or five saws (though none are as cool as the one you have). Another tool that I had the same "wow, this works great" is a die filer. If you do not have one, you should look into it. I made mine from a kit I ordered online about ten years ago. It uses small bits of files to help shape small pieces of metal by hand to almost any shape you can imagine. Loved your show and I love your channel. Thanks for the entertainment.

Hey Adam, I've been in awe of you and Jamie Hyneman since I was a young man watching myth busters from the beginning. Your ingenuity and creativity and persistence was inspiring. I'm looking forward to the day that I can pass your creation on to my children just as much as Indiana Jones and star wars. I'm a professional bench jeweler, and use a saw everyday. It's not about the saw it's about the magnification and consistency of your stoke. Any saw with a good blade will cut in a straight line. The ability to see your cut, and adjust left is key. As with any hand tool don't force it, just a gentle up and down, let the tool do the work. If you push the saw it will wander left and right. Best thing is to imagine the blade as a piece of wide flat wire that you are pressing edge on into a hard surface. As you push it wants to flex left or right. Gold pike blades are the best. 4/0 blades are our general purpose blade size. But depends on thickness and density of material your cutting. Brass of less than 3mm, 4/0 is fine. Thicker Material, lower the number, 5mm brass 3/0 or 2/0. After size 2 or 4 it's more mine a coping saw. Definitely tune the saw like a guitar. For me and my basic German solid steel and wood saw is a high C. If the blade is too loose it will bend and fatigue early and break. You can tell if it's too loose if you loosen the blade on one end and it curles up into a U shape. Either you've been cutting something very hard or the blade is too loose. Using this saw is an art, And there is so much feel to this art. Im trying to find a way to help you find the balance in verbal / text form. It all comes town to tension of the blade. It needs to be tight but not so tight that it snaps. Loose but not so loose that it bends too much and breaks. As with the Japanese carpenters saw, loose grip, let the tool do the work, and patience. Even though it's simple, it's still a precision instrument. I've been at it for years and am still humbled. Good luck and thanks for all your insights over the years. -Austin-

I agree with your feelings about routers and table saws/any circular saw blade using tool.

In defense of the Ryobi planer, I used one to make large chamfers on sime big aluminum castings. Had no issues at all, handled fine, always felt in control. Ended up removing several pounds of aluminum with one set of carbide blades, which still cut nicely.

@tombeers3489

2 ай бұрын

I have about ten Ryobi 18v tools. I do my own work around the home, on my collector car, in the yard, etc. They are inexpensive, work great and get a lot of consumer-level use. They cut, drill, nail, sand, plane accurately. Still on some the original batteries after years of use. Perfect for the "couple times a month" craftsperson. Not high-end stuff for sure, but they do the job.

It’s my understanding that there are different jeweler saw blades for different materials and thicknesses.

I could listen to Adam talk tool's for hours , Thank you Adam .

Those inset metal parts on that box is wonderful.

Stumpy Nubs just made a video about building your own saw of this type in the old-timey way, and claims it works just as well if not better than these fancy titanium ones. Possible one-day build/test and try idea?

It's funny he mentions his electric hand planer, because I have one that I love, it does passes from 0-1/8" in 1/64' increments, and it just works splendidly for removing layers of wood and finding the average of a surface's level. That being said, it will rarely keep your boards square unless that is your only goal, and you better make it all the way down your board or you're going to get a radius you will never get out unless you start that thing perfectly where you stopped.

Id love a video of you showing your favorite scifi space ships. I've been really into the starfield "nasapunk" style lately.

Would be fun to see adam making one or more great big library type ladder(s) that would slide around his tall storage areas

Hand planer is great for door fitting especially really old doors going into an old frame where none are square and you need to splice on a filler that has to fill the uneven space. You can easily hog off to get close then go fine to finish. Lots of chips and dust though.

11:13 the word you are looking for is: "epiphany" (noun) - (also can be defined as) an experience of a sudden and striking realization, or also, a moment when you suddenly feel that you understand, or suddenly become conscious of, something that is very important to you.

I love my Kreg pocket hole jig. I use it alot

Adam, regarding your frustration with accessing Z-space storage, have you considered setting up a cable rig system similar to a SkyCam system used to move a camera around a stadium?

I had a tablesaw kick back event once about 12 years ago and it literally threw a 2x3' sheet of ply wood all the way across the room... Didn't get hurt at all, but I've never touched a tablesaw since!

I've been building a small obstacle course for my kids, using logs from stone trees that fell in a storm. The powered plane has been a godsend for roughing things out. 100x faster than using a sharp drawknife and probably 10-20x faster than even sanding with an angle grinder and 36 grit flap disk. I also used it to plane a beam for my mantle and it worked a treat. Barely required any sanding once I got the hang of using it on the most shallow cut setting.

It's been like 30 years since I took jewelry making class. As I recall with those saws was to keep the tension right. Granted we were using crappy university student stuff and that space age device looks awesome :). I cut some brass with it but mostly remember using it on the sterling zippo case I made (box + hinge, my teacher was overjoyed). It was just one of those things where you'd tighten it up, run the beeswax, start cutting and get it off angle or catch a little and the tension goes off and pop. If it broke at the end you had a chance of using it a bit more but if it broke in the middle, on to the next. If you broke three in twenty minutes, you just put your kit away for the day ;D. That was one class that far surpassed my expectations even if the teacher was a nut case.

it do be like that sometimes... last week friends and i doubted the efficacy of using a prybar and sledgehammer to break away slats from a pallet, trying various powered cutting tools at first... then we tried it "the hard way" and found it to be the best method as far as using what we had on-hand

@rekall76

2 ай бұрын

and of course, of course, we only got really good at it by the time we were just about done

The hand planer is terrifying. I have two - corded and cordless. They spin up so fast 🤯

I bought a ryobi hand plane and must say it was the perfect tool for odds and ends jobs like trimming the bottom of a door after updating flooring. Taking a thin layer of a 2x and other trimming objects

“This thing is so spectacularly rigid, it’s magnificent.” Among all other things, Adam’s tool videos are a great party game. Take a drink every time you could have interjected, “That’s what she said.” You will quickly get hammered. 😂

I use the Knew concepts saw for my hand cut dovetails. It's ability to basically make 90 degree cut saves so much chisel work.

Hearing Adam talk about temporarily putting a machine somewhere years ago and it still being there years later reminds me of the statement 'Nothing is more permanent than a temporary solution.'

You need a library style storage system with rollable ladder for materials, nuts bolts etc etc

I am working Alt. methods of the shop being able to just keep growing in size as our shop needs grow.

Perhaps you could design access to high storage with a library? type ladder that moves side to side on wheels that could also fold flat against the shelves/racks when not in use.

hah! thats funny , I am a cabinet installer and some of the tools you said you never use I use ALL THE TIME . the power planer...every day , mini table saw, at least weekly sometimes daily, it is good when I am doing a service call and need to rip some narrow stock or something small and do not want to lug out my full size table saw, pocket screw jig(I think thats what you were talking about) I use that for joining materials without having to screw or nail thru the face, putting together face frames ect...biscuit joiner, I use probably monthly , it is good for joining wood tops and keeping them aligned while the glue drys...they are all really more tools that you would use in the field , if I am in my home shop usually I have other better machines for these same tasks, I am guessing that is why they are not all that useful for you since you are not often testing up shop in the field somewhere and doing woodworking type stuff. it all just depends on what you do. like for me a lathe...I dont know that I would ever use but I still want one haha

When I was coaching high school robotics I could always tell which teams at competitions had some serious financial backing and/or had an amazing manufacturer as a partner solely based on how many if any anodized parts they had lol. Especially because it was usually anodized aluminum in very specific school/team colors. You could spot the teams that worked directly with NASA from a mile away with their shiny anodized blue and red chassis.

Adam, My other half uses a jewellers saw for cutting huge numbers of rings for chainmaille. She generally works with E5356 Aluminium but we have only purchased blades a few times over 20 odd years. I think the Glardon-Vallorbe range might have been rebranded but she managed to drastically extend the life of the blades by simply running the blade through a bit of beeswax every few cuts. She still has a small stockpile of them even after her many projects. I think you would prob like one theme she did where she built a full set of spheres based off the archimedean solids.

I love the coping saw, And the omnidirectional blades are a game changer. But they felt like I was learning the tool all over again. I think a lot of it comes down to technique and being patient. And if you need it more straight than not, use a regular blade.. Have Bestway on a saw atm, some very small Dia. spyral cut. Seems to give me a lot before too dull. They all snap if you give them a chance. That small surface is experiencing some heat.. Of all the tools you want to let it do the work, it is a stage boss for sure. But the fine control of teaching yourself how to sneak up on the work. Is what I feel you gain by using the coping saw well.

For the items stored high up on the wall, a library style sliding ladder would be supercool. Just a thought.

In defense of the Makita hand planer, it is very good at some somewhat specific tasks. I built a log house many years a go from a "kit". The logs were pre-shaped with tongues and grooves on the top and bottom surfaces that provided a good seal mating surface to stop air and water leaks. This worked well on the intermediate courses, but required the tongues to be planed off on the top courses to provide a flat surface for attaching things like rafters or trusses. I found that there was no better tool for removing them quickly and smoothly from 8-12 foot logs than this tool. It has also come in handy for quickly shaping a new door to an old, irregularly shaped frame or sill. You may not do any tasks where it would be useful, but for some it is the best option.

@TheOriginalSeveth

2 ай бұрын

That’s impressive, by chance do you remember the manufacturer/company name for your kit? Very interested in looking into something like that!

@JohnMckeown-dl2cl

2 ай бұрын

@TheOriginalSeveth You may not believe this but the company is called Lincoln Log Homes. (And no, it didn't come in a big cardboard tube). The are located in New York State near Lake George. I'm not sure they are still in business because that was over 25 years ago.

If you work a lot with brass check out a micro pulse welder. It will allow you to very quickly tack brass parts together to hold them in place during silver soldering.

You need one of the slide ladders like in old day libraries to make access easier

Adam, you need one of those rolling ladders like they have in the fancy shops or library so you may traverse the great heights without fear or having to work up your gumption to tackle the task.

I bought a piece of infrastructure that got delivered yesterday... and immediately on opening it up, I decided that I didn't like it. I wanted to solve a problem and I thought it'd help, but it just made the problem worse... So now I have TWO problems.

Curious if Adam has ever used tumblers for anything like beating up a project, taking the rough edges off, etc.? I've done some welded chainmail and took the sharper edges off by using a rotary tumbler with ceramic media. Also great for getting a high polish on brass using corn cob or walnut media.

one note for Adam "Use More Cutting Fluid" Savage - make sure you lube the jewelers saw blade. Bur-Life or such are great, but I've sawed a lot using an old candle or most lately a brazil nut - seems to work quite well for me for a few months now. I buy a few from bulk aisle in grocery store and keep extras in my mini-fridge

Back when I was doing architectural glass art I had a Ryobi cordless drill. Every time I was on job site the contractors looked at it and then gave me a look like I should get back on the Group W bench. They all had DeWalt or Milwaukee or Brosche tools. Over the years I found several things to be true about my Ryobi. 1. it worked just fine, never a problem with it until I finally wore it out. 2. Nobody ever wanted to borrow it so I didn't have to go hunting it down when I needed it. 3. Nobody stole it. All of the guys who had the name brand tools were always complaining about how their tools walked off the job site. I've also had a couple of Ryobi corded drills-unlike all of the name brand tools-they all had really nice long power cords.

@danjamesdixon9835

2 ай бұрын

Anyone that talks shade about Ryobi hasn't actually used Ryobi, I guarantee it.

@DonariaRegia

2 ай бұрын

While that was true at the time, the price point of those brands has changed. The Ryobi increased in price while Milwaukee and DeWalt have become more affordable to the point where recommending the Ryobi for an entry-level platform no longer makes sense. The performance difference is markedly noticeable. But if one wants to stick with Ryobi, look into used sets that go back to the blue tool days and buy the 4ah batteries online @ 2 for $100. That way the affordability is fully exploited, and you can toss a worn tool into the spare parts bin.

@stephenledford3808

2 ай бұрын

@@DonariaRegia Not really an accurate statement there...Performance is relatively the same across most of these brands with the only difference being speed controllers for triggers etc. or form factor. Now when you get to specialty tools like demo hammers and such then specific brands like Bosch or Hilti fill that niche. Ryobi hasn't really changed that much in price and hasn't been an entry level tool for a long time now. They also have the most extensive eco system on the market with Milwaukee in a distant second and the rest way behind.

I have actually needed a power hand planer a few times. Really wide thickness planers are pretty rare and expensive. Within the last six months I've had two projects that required planing things wider than my thickness planer (one was a slab of birch that i made into a desk top). When you need one, it's a handy tool, but i can see why they don't get much use.

Absolutely love my lunarepelicas Apollo watch straps. Cool to see them asking questions on tested.

I have made key surrounds like that as well. I file the square portion with a needle file, which is how I suspect how they were originally formed.

I too am petrified of the hand planer, but if you needed to bring in a door do you go for the circular saw?

Dude you should build some sort of cool library ladder that you can move around your shop. That would be really cool to see in a video

I use Vallorbe blades for my jewllers saw, the Knew Cocepts saws look great definately a wish list tool.

Adam, I love the scroll saw, I can do some spectacular cuts with it. I just bought a 30 inch Pegas.

I love his energy, wish I had that energy level

NEXT PROJECT. For your next shop, build wall storage that has a ladder that runs along a rail at the top of the wall, as seen in olde English libraries.

Why am I not surprised that Adam has "Embalming Tools" in his shop! Love the esoterica of Adam and his tools!

That flush/inset latch design is excellent.

If you use lubrication with a jewelers saw the blade will last longer. There are special, wax like lubricants that come in a solid form. You just run your blade through the wax before your cut. The blades are meant for soft metals like gold and silver, but they'll cut through more than that. I've used them for meteorite, made mostly of iron and nickel. They can be pretty durable for their size if you're careful.

The funny thing is I look at that keyway as someone with only 1 power tool and can think of ways to do it. Drill out the key hole, then use smaller drill to make the notch, then use a jewelers file to square the notch. Cut around the outside with tin snips if possible as close to the final shape without warping the product, and sand thin/file to the size.

Adam jesteś niezwykle pozytywnym człowiekiem oglądanie Twoich filmów daje mi wiele pozytywnej energii . Pozdrawiam z Polski Adam, you are an extremely positive person, watching your videos gives me a lot of positive energy. Greetings from Poland

I don't have a shed but are into cooking and can completely relate to buying gadgets and gizmos that i rarely if ever use

i use a hand planer at work sometimes for stripping the outer layer from large diameter HDPE pipe. you see you must strip the outer "skin" of a pipe before you can fuse a fitting onto the surface. there are several different specialty tools that they make to do it, but i honestly haven't used anything that is faster of better for the task then a hand planer.

You need one of those ladders on a track, like in those old libraries.

The weird thing about tools that disappoint is that you don't use them often but they seem to be the exact things you need at that moment. I have tools I have only used only a few times but boy was I glad I had it.

I've used jeweler's saw almost daily for 45 years (brass musical instruments) and have done well with the best frames after modifying them. I ordered the less expensive Knew frame after seeing your video and I'm very happy with it as it came, except I will install a larger wooden handle (arthritis and I don't like the bicycle foam). The blades that he sells cut straighter than what I've gotten from jewelry and repair suppliers, but don't last nearly as long (suggestions welcome).

Blades should have 3-5 teeth per thickness of material. Have a wad of beeswax on hand to lubricate the blade every 20-30 strokes. Saw on a jewelers V block and don’t be afraid to cut new slots into it as needed. Blades usually break when using too much forward pressure, allowing the work piece to chatter on the up stroke, or turning too rapidly. All 3 are solved by having a lighter touch and sawing up and down. Spiral blades are not really necessary.

I've used a of Lazer Gold blades from Rio Grande Jewelers Supply, also have had fairly good results with Pike and Herkules. I do a lot of sawing, mostly on 22ga metals, mostly with 5/0 blades. I haven't seen Adam's bench pin yet, but my biggest suggestion is to have the pin set high enough that you can comfortably cut without slouching. I saw with optivisor magnifiers on and with my pin near level with top of my shirt pocket. At that distance I can blow a lot of the dust away and can cut for a couple hours without a backache Another thing to watch for - once you finally get good enough to not break blades as often, it is vital to be aware of signs the blade has worn out. A bad blade can divurge from your desired line very suddenly at times, ruining your piece I've tried a Knew Concepts frame and love the weight but it was an old model without the tightening cam lock. I nearly always just use my old-school German style frame. With any of the brands there will be dud blades on occasion - learn to just throw them away and grab a new blade if they don't immediately feel right.

I've had really good luck learning with and using Laser Gold blades from Rio Grande.

the power planer is great for people doing remodeling when you have a wall open in an older house, and it's not "flat" take a straight edge find the high spots on the studs and then gently plane them down (then fill the dips with the long carboard shims), and boom, a flat wall for when you put the drywall back.

When we are working with wood or metal at school I always pick up coping saw because i hate using the scroll saws