So Happy my Bonster Woodcraft sticker didn't get covered up in the top left corner. Lol. Looking great Kyle!!

Thank you for this video, I just started my own business doing remodeling Two years ago and I’m trying to figure out how to do something similar to my trailer. Definitely I learned a lot with your video. Thank you so much!

Much better organized. God bless you and your family.

............ And I thought Norm Abram had a tool for everything. Awesome fit out dude 👌🏻

By far the best tool trailer video. You always take pride in your work and I like that you did not cut corners on your trailer. Great job.

I wish we didnt have to decide between feeding our family or buying a piece of plywood these days lol

@ericpacheco4823

3 жыл бұрын

🤣🤣🤣

@davidreish211

3 жыл бұрын

Amen

@oldcountryman2795

3 жыл бұрын

This is what a nation in decline looks like. Get used to it.

@shelter7214

3 жыл бұрын

My wife wanted to go someplace expensive, so I took her to the lumberyard.

@mikez4132

3 жыл бұрын

@@shelter7214 hahah

Looks good Kyle. Thanks for sharing. 👍😁

Bro its alot of work man. I am so proud of you.Thsnkyou. Genuine Knowledge is a hard one to put a word on. So glad to see. Keep up the good work.

I really enjoy watching you work. Reminds me of the way I like to do things

That trigger control is on point 👌🏻

Seeing you use that M12 drill so much convinced me to buy one

@Garth2011

3 жыл бұрын

The M12's have excellent battery life they say

@stevebyers4479

2 жыл бұрын

Me too, love the 90 degree adapter

For me, the ideas in kzread.infoUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

That's really cool! I like the ideas thar you come up with in the tool trailer. I just operate a small Handyman Service in my hometown, but, my trailer is not set up as elaborate as what you're doing. Great job!

Looks great!

Nice job on the work Trailer.

Surprising Design and easy building guide

Nice trailer. Great job.

Old mate’s trailer is the size of my entire workshop. Giving me some ideas of how I could reorganise.

9:30 - I always set my Kreg bit stop a little shorter so I can worry less about the screw popping through the face.

everything in the right place 💯👍👏👏👏 hi Kyle

Love the build. Maybe a small vice for tool maintenance on the work top??👍

Thanks for the info on Andy Glass, after looking at his Instagram, I realized he's only an hour south of me. Defiantly going to be giving him a call to get some racks ordered.

@RRBuildings

3 жыл бұрын

Great nice guy

8:27, those 💪🏻💪🏻 lookin swole...

great job man. Looks good.

SWEET!!!!!!!!!!!! Kyle u the man!

Enjoyed the show

Keep on posting!

he straight up has a CNC route all this. and likely makes a killing. thats sick

Very nice! Cool trailer!

That is incredible

Looks really good

It only has to work for you, Kyle. I'm left handed and I can see a few things I would change to suit, but not many and not much. A plumber's tools are a bit different, but using space wisely is the name of the game- you win! Kudos fro better carpentry then this plumber did too! I also cheated and used some big slide out drawers on the floor as bonus spaces. It made a big E350 van a little "crouchy" to get into and out of, but it gave me the space to keep the middle floor clear for materials, so I seldom needed a trailer. If I had to do it again, I might like your stand up and make it happen pattern better! The next time you insure the trailer make sure you list a value for the interior- I got hit in the rear and it trashed my floor drawers and because they weren't listed "options" I was unable to get full insurance value. FR

@GlassImpressions

3 жыл бұрын

Get with us to redo your space!

@fredericrike5974

3 жыл бұрын

@@GlassImpressions Sold my last van six years ago when I retired! But I would if I was doing another! FR

Add 4 3' caps screwed to the saw blade holder and the plastic jars 6' deep can hold nuts, washers, self bolting screws etc.

Top shelf build man! 😂

Two words.. Ron Paulk. Guy is a mobile tool trailer legend. Lookin good

@kmonnier

3 жыл бұрын

He over thinks things 🤯

@jacobrowland9134

3 жыл бұрын

I've seen his trailers and other stuff he does. I think he makes it way to complicated.

They make pocket hole precut dowels. A pack of 50, some wood glue, and a pull saw will make for a sexy finish!

I like it a lot !!!!!! Thank you for sharing

Kyle how about PVC pipe to store your caulk tube like other person have done. Nice trailer build out.

good stuff ---

Are you taking in to consideration the fact that one good hard turn or bump and a lot of those shelves will go rolling open. I would consider some sort of brace bar to slide in to secure things on the road.

Conceptualation 🤔got it👍

When the plywood in the trailer is worth more than the trailer lol. I love the pack out shelves to the point i might go buy a set.

@RRBuildings

3 жыл бұрын

Spent $500 on plywood

Good video,thanks

Any drunk driver who sideswipes that trailer is going to get a nasty shock at the insurance bill! Sweet work - I hope it gives you many years of service for the thought you've put into it.

you should also spray all the plywood with some shellac so you can clean and wipe it off in the future

Great video saludos desde Chile

1/2” plywood for the lower section and 3/4” plywood for the upper section? Must have stops for every opening. While driving things move and get damaged. I am fussy so in mine I add a few more details and creature comforts. Need a clean area for making tea and coffee. Definitely storage for a change of clothes when it rains or you get dirty. Add a plastic bin for muddy boots. Add a couple folding stools for changing boots. Somewhere a wash up station to clean up a bit before driving home.

I wait next series 🙂

They sell 3d printed milwaukee battery holders they are pretty cool so you can store your batteries on the wall

I think the coby could be a slide out battery holder.

Great stuff. You planning on hanging ladders from the ceiling or some other solution?

Organization!!!!!

Question, you where using a drill, I didn’t recognize your drill because of the unique design. Not a normal drill. Looks awesome, great work.

Hey think about using some abs pipe for the caulking tubes

2:13 Insert 90's sitcom laugh track

You need to check out Stealthmounts for battery storage & chargers

Kyle go to Menards or home Depot or Lowes and grab a PVC pipe big enough for to put all your stabela tools inside of it and you can get the PVC pipe with the treaded ends to put a cap on each end so your stabela tools won't go all out install the PVC pipe on the wall inside your trailer it will help you out.

@ 6:30 im curious to see your correction to the obvious problem your going to have with all the drawers sliding out and the packouts bouncing around and coming out of their recievers and landing on the floor of the trailer

Hi Kyle! Watched all your videos. So when can you come to Southern Idaho and build my 80' X 50' Post Frame home?

Every trade is going to have different needs for their trailer. I might suggest a view of the Ron Paulk Smart Workshop.

I think you will be surprised when you pull that trailer for a day or two. How do you keep the drawers from sliding out. I had a trailer with slanted shelves for Little Debbie and Sunbelt treats that took years to get dialed in to keep boxes on the shelves. Good luck, I hope it works. Maybe have Greg put you in the trailer and drive slow so you can see how much the trailer rocks and sways.

@GlassImpressions

3 жыл бұрын

Rv Stay-Closed slides

custom stabila torpedo level storage!!! haha

things always just end up working out perfectly for you kyle😂😂

I can't believe I got through all three

Hey Kyle I got a question for you! When do you charge all your batteries? Specific day? or when every single one goes dead because you have a ton of batteries!

@RRBuildings

3 жыл бұрын

Sometimes on weekends or in the trailer on site

Nice work!! Your trailer looks amazing what is the brand of your tape measure

@miguelriou7955

3 жыл бұрын

Lufkin nite eye

@alonsoviquez8933

3 жыл бұрын

@@miguelriou7955 thanks man

15th comment. Nice video RR.

Just found your channel through Matt Risingers video.... Killer job you guys are doing fellas!

@RRBuildings

3 жыл бұрын

Thanks man

If you have trouble with stuff sliding out in transport might I suggest using “tarp ball bungees” - little bungee cord loops with hard plastic balls on the end. They can be used in a number of ways to secure stuff and since the are elastic they are easy to stretch out of the way, or the ball fitting into a slot or pocket of some kind makes them easy to pop out and get completely out of the way.

Where'd you get that small drill? That thing is sick.

Mount your levels and tracks on the ceiling?

Hey Greg hold this

Hey man big fan! What brand shirts are those your wearing with company logo ??? Thanks !!

@RRBuildings

3 жыл бұрын

Usually wear truewerk.com/?sca_ref=551902.6dfT3MtgXA

Any concern with the weight added to trailer with all that wood?

Wbu didn't you use the magnet in your driver to hold your screws?

Do you guys use some software like, AutoCAD or Revit to draw your projects?

When you weren’t using the pocket screws what were the other screws that you were using to assemble the cabinet

@davidreish211

3 жыл бұрын

Grk fasteners

Kyle what make of work pants you buy look way more comfortable than carharts!

@RRBuildings

3 жыл бұрын

They sure are. These are from truewerk truewerk.com/?sca_ref=551902.6dfT3MtgXA code RRKYLE15

What is the screw/drill you used for the assembly? Is that an electric screwdriver? What's the value of using that over a standard drill on a low clutch setting?

@andyfortin9209

3 жыл бұрын

It’s the M12 installation driver. It is a drill with a clutch. It’s great for small areas and ergonomics

@GradyDuncan

3 жыл бұрын

@@andyfortin9209 thank you!

Kyle, have you seen those cut lengths of PVC pipe, used as holders for tubes of caulk etc? Pretty great idea

@billzima7068

3 жыл бұрын

I bought all ridgid boxes when they first came out and the crates that lock on. And I used to keep all my caulk in one but hated when it wasn't full bc they would fall all over so I cut a piece of 3/4 ply to fit inside and then laid out hole's with just enough meat left so it was still durable and drilled out with a hole saw..went a little overboard but also hit them with a round over bit. Then put a couple raiser blocks under it so it sits like midway in tbe crate. I love it..I forget how many it holds but it's really more then I need to have on hand. But I never get in a pinch bc I don't have something and when I know it's dropping below freezing I just grab the crate and bring it inside.

Is that all 3/4 plywood? Its a bit hard to tell from the video.

How do you keep the CNC’d drawers from rolling out in transit?

Sponsored by the State patrol. (Bait trailer program) 🤘😎

👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

Would this shed be easy to disassemble and more to another location?

I was wondering what prevents the drawers with the pack outs from sliding in and out while going down the road?

@markarita3

3 жыл бұрын

Same here. Those right turns are going to be noisy!

@chessiekid4018

3 жыл бұрын

Me too!

@markarita3

3 жыл бұрын

@Dr. Michael Johnson Jr ? 3:10...3:41 Greg is literally squaring them up to the face. Not sure why you would think they're angled. Plus, when Kyle shows them off at 6:10, they just sit there (leveled), as opposed to rolling back in - which would actually be a nuisance really. I'm guessing there will be some kind of stopper pin of sorts...that's what I would install.

@cullenmiller8170

3 жыл бұрын

@Dr. Michael Johnson Jr I don't think so because they used a square to install them.

Name of the tune around 5:30?

I don't have instagram to contact him for a build for my husband. Is there another way? He really enjoys your videos.

Did you figure in weight distribution?

What size trailer are ya using?

3:29 AND NOW WHO ELSE, is gonna load up the game and check out the music, besides me🙋🏼 Dang it All, why’d ya have to go and mention it

Grateful for your time and video, but doesn't anyone else see the missed opportunity and also the waste of wood? Why doesn't Milwaukee (or DeWalt, or others) just incorporate a design-feature in their storage to add slides? Why waste all the baltic birch for a cnc'd shelf that instead, have a clip or bump-out feature/hook that allows drop in to a slide, and use as drawer, and/or be removable? Plus, look at the weight gain in the trailer? Sorry... late night and thinking...

What type of work pants are those? They good for hot weather?

@RRBuildings

3 жыл бұрын

Yes love them and have been wearing truewerk for the last 4 years about. Best out there

@RRBuildings

3 жыл бұрын

Actually I have a code to save 15% too truewerk.com/?sca_ref=551902.6dfT3MtgXA code RRKYLE15

@danmarks6810

3 жыл бұрын

@@RRBuildings just placed an order. Do you guys know of any similar crews in GA?

Whats the music called at 5.30?

Please restock the new black RR builds hat

How do I style my shed?

I clicked for Greg

Conceptionalisation ?

Wait until you do a right hand turn those are all going to slide open 😉

@GlassImpressions

3 жыл бұрын

Stay-closed RV slides.

@huntnut8635

3 жыл бұрын

Got ya.

What was it like before