Today I will show you how to replace and adjust a Toilet Push Button with dual flush capability. Link for buying replacement part in Amazon: amzn.to/3E5gP6P
Жүктеу.....
Пікірлер: 18
@melissastima45926 ай бұрын
Ty was able to fix it by myself with your video!
@handyneasy
6 ай бұрын
Glad to hear that Melissa!
@nicolegomez9730 Жыл бұрын
Very helpful thanksss!!!
@sidrajnz Жыл бұрын
Very helpful. Thanks so much.
@RAJKINGRIDERАй бұрын
best idea.....thanks bro
@deborajosephsplatt88Ай бұрын
Very helpful video thanks
@handyneasy
Ай бұрын
Hi Debora! Glad it was helpful!
@EPaulIII10 ай бұрын
That button assembly could have lasted years and years longer. A small brush (tooth brush) could have removed the light corrosion and then been used to apply a light coat of grease on that metal part to retard future corrosion. You should, of course, not apply any oil or grease to the plastic parts.
@cheryldrake62367 ай бұрын
Great video, what brand
@handyneasy
7 ай бұрын
Thank you Cheryl! The brand is Fluidmaster and you can buy it in Amazon using the following link: amzn.to/3E5gP6P
@observelearn234511 ай бұрын
What about the inside of the toilet? Mines is new and how does it connect inside of the toilet
@handyneasy
11 ай бұрын
Hi Observelearn2345! Normally, you would not have to do anything inside of the toilet. The end of both rods should rest on the flaps of the flush valve that is stationary on the toilet. As you mention that your toilet is new, you should probably have a push button with rods already cut to the appropriate size and already assembled. You would just have to turn or adjust the rods until they touch (slightly) the flush valve. I hope this helps!
@Vanillabean91436 ай бұрын
What if one button is stuck and it is not corroded i just need to fix one button
@angetodac
3 ай бұрын
not possible
@reflexxtr Жыл бұрын
Why didn’t you just undo the plastic ring? surly that would be easier 😌
Пікірлер: 18
Ty was able to fix it by myself with your video!
@handyneasy
6 ай бұрын
Glad to hear that Melissa!
Very helpful thanksss!!!
Very helpful. Thanks so much.
best idea.....thanks bro
Very helpful video thanks
@handyneasy
Ай бұрын
Hi Debora! Glad it was helpful!
That button assembly could have lasted years and years longer. A small brush (tooth brush) could have removed the light corrosion and then been used to apply a light coat of grease on that metal part to retard future corrosion. You should, of course, not apply any oil or grease to the plastic parts.
Great video, what brand
@handyneasy
7 ай бұрын
Thank you Cheryl! The brand is Fluidmaster and you can buy it in Amazon using the following link: amzn.to/3E5gP6P
What about the inside of the toilet? Mines is new and how does it connect inside of the toilet
@handyneasy
11 ай бұрын
Hi Observelearn2345! Normally, you would not have to do anything inside of the toilet. The end of both rods should rest on the flaps of the flush valve that is stationary on the toilet. As you mention that your toilet is new, you should probably have a push button with rods already cut to the appropriate size and already assembled. You would just have to turn or adjust the rods until they touch (slightly) the flush valve. I hope this helps!
What if one button is stuck and it is not corroded i just need to fix one button
@angetodac
3 ай бұрын
not possible
Why didn’t you just undo the plastic ring? surly that would be easier 😌
Paqukta la del barfio
@juicylondon
11 күн бұрын
Pajita la del barrio
@juicylondon
11 күн бұрын
Paqukta la del barrio