How to change a Geberit Flush Button and valve old style www.choicereplacementtoiletse...
Жүктеу.....
Пікірлер: 88
@ralphrees2809Ай бұрын
Excellent Video / Tutorial. Made changing my toilet flush mechanism a real simple task - old out and new one installed and correctly flushing within 45 minutes. Could not have done it without your help and video. And explained in such easy to understand language. Thank you so much.
@cdcondon510 жыл бұрын
You are a lifesaver! I live in Indonesia and have been trying to get the commode open for months now. I gave up and googled it... Nothing matched and then I thought of KZread. Took my 20 mins!!! After waiting over a year! Thank you kind Sir!
@geoffmoore144410 жыл бұрын
Thanks mate. The concealed button mechanism had me stumped until you clearly showed me how to remove it on the video. Great!
@sunkat764 жыл бұрын
This is the clearest tutorial I have seen yet. Thanks for getting straight to the point. I found it particularly helpful that you explained how to determine whether it is the inlet valve (ballcock) or the flush valve. That really helped. I have liked and subscribed.
@twiggacott8 жыл бұрын
Nice simple instructions and no annoying music unlike a lot of other instructional videos.
@OFEgarden10 жыл бұрын
Thanks a stack for the clear explanation. The instruction sheet doesn't show you how to remove the main part - so easy with those two clips. Something I found out in a forum - the main valve (a flat grey rubber ring, may leak because it develops small water-filled blisters on the surface. If you want a quick fix you can just pop these with a sharp blade (don't go right through the ring though!), refit and the slow leak's cured.
@lrkebrunphilipsen7278 жыл бұрын
This helped us a lot! We had no idea how to get the aggregate up. Thanks a lot!
@vijendralal28204 жыл бұрын
Thanks for sharing this knowledge in such a clear manner. It worked perfectly for me and helped me to fix my broken flush button without having to call a plumber.
@dithell9 жыл бұрын
Fantastic, been trying to work out how to open the button all day. Thanks v. much.
@davidsandland541510 жыл бұрын
Top video.......I have been scratching my head on this one for a while. Thanks !
@glau106 жыл бұрын
Great video! I have followed the instructions and I have had no problem at all. Everything done ok in five minutes. Thanks for sharing.
@johnmillen586110 жыл бұрын
Very useful. The fault is often the washer which can be replaced without throwing out the main plastic unit.
@SudeepBajpai4 жыл бұрын
Thank you! Saved me from disassembling the whole thing and instead was just unplug and plug the new Valve in place.
@neilbailey2893 Жыл бұрын
Simple and straightrorward - thank you
@yachticus9 жыл бұрын
thank you that was a superb explanation - clear concise and accurate
@pattygibb2160 Жыл бұрын
With the help of this video I have managed to do what two different maintenance guys from holiday letting agent have not managed to do - fix broken Ideal standard dual flush button and adjust Geberit bridge to correct height.
@MySeegee3 жыл бұрын
very clear and very comprehensive instructions
@Toxic_Crusader_X4 жыл бұрын
excellent video. very professional and knowledgable.
@Catsdontcycle9 жыл бұрын
Thanks - very helpful (along with your other video on removing the old-style crescent button version.
@philiprahman67788 жыл бұрын
Thank you so much. It was helpful and easy to understand.
@sutejom7 жыл бұрын
thanks youtube... i learn how to fix my flush toilet fill valve from this.... very helpful....
@themadears10 жыл бұрын
thanks ! u helped me! its been an hour i tried to open the top of my toilet until i saw your video!
@endriu19819 жыл бұрын
Thanks you very much. Andy from Poland
@landshark7.6298 жыл бұрын
Thanks for the info sir! Totally saved my toilet. I was at the end of my nerves and just about to prybar the top
@alysonstibbard94717 жыл бұрын
Incredibly helpful, thank you.
@mytoiletSpares9 жыл бұрын
Great Video, straight to the point
@pb781510 жыл бұрын
Thanks for the video. Very helpful!
@gilso14503 жыл бұрын
Excellent tutorial - thank you
@johnrunner61318 жыл бұрын
* This is a very clear explanation ~ thankyou. The cistern I need to work on is however under a fixed worktop which is only 3cm above the top of the cistern. I won't be able to see what I'm doing ~ I hesitate to attempt to get the flushing mechanism out by reaching in, squeezing the two clips, turning the whole thing horizontal, withdrawing it and then trying to reverse the whole process with a new mechanism. * I don't even know whether there will be enough of a gap under the worktop to withdraw the mechanism, even if it's horizontal , despite the the space created by removing the cover. * Do you know whether it is easy, in particular, to slot a new mechanism into place without being able to see what's happening? * If I'm only successful in unclipping the old mechanism and then either a) can't get it out (and can't then clip it back) or b) can get it out but can't clip the new mechanism in, it's going to be a matter of getting a plumber in or maybe having a quiet word with the builder whose plumber fitted it like this.
@scabbo100 Жыл бұрын
thanks for posting. Very helpful
@MrE4all9 жыл бұрын
Thanks you..Grazie from Sydney
@juanccg638 ай бұрын
Muchas gracias ahora se como arreglar mi tanque de agua 👍
@denisemenashy93928 жыл бұрын
Thanks, your video was really helpful!
@kenthomson92758 жыл бұрын
going to try this today...
@robertYTB78g7 жыл бұрын
Excellent vid, very helpful, thanks
@nsimha307 жыл бұрын
thank you. The information provided is very useful
@johnklansek88983 жыл бұрын
Great informative video clip thank you for posting it solved my issues
@theoriginalshakil80138 жыл бұрын
Very useful. Thank you
@333BRETT10 жыл бұрын
Thank you. I could not work out how to remove the button :)
@KeithHuang8 жыл бұрын
thank you, helped alot
@alilarissa19 жыл бұрын
Thanks mate ! great job !
@purabaya13358 жыл бұрын
thankyou. it's really helpfull
@TnyRwn7 жыл бұрын
Thank you, very clear!
@System32n10 жыл бұрын
thanks.. this video just saved my toilet :)
@miljanmatovic8802 жыл бұрын
Fantastic! Thank you so much!
@phillipthomson73484 жыл бұрын
Many thanks for this. Possibly saved our marriage.
@tavariledir97345 жыл бұрын
Great,Thanks for your help
@susiemiller90186 жыл бұрын
Thank you grateful for the information
@patrickchang-leng10739 жыл бұрын
Great video, I have noises that come after either buttons are used for flushing just as the water is about to be cut off. Sounds like hammering noise, I believe that this could be an air lock, how do I remedy this please?
@geoffmarriott43874 жыл бұрын
Great information thanks
@chris_this_is9 жыл бұрын
Thanks brother!
@idhamhafidz10 жыл бұрын
Thanks man. I managed to do it after you showed it.
@ivangilbran10887 жыл бұрын
thanks your info👍👍👍
@henrykwofie15477 жыл бұрын
thanks for ur help
@dsd70042 жыл бұрын
Just what I needed. Wasn't sure how to pull valve out. My one, when you flush, the system keeps on flushing and you have to press the top buttons again, for it to stop. Not all the time but about 1 in 20 flushes . Any ideas on what's going on???
@djayadiu20026 жыл бұрын
thank you :)
@davidmarland40658 жыл бұрын
Excellent, thank you
@user-eh3qu9ws3d
4 жыл бұрын
اغنيه 7 لا
@lindsayveronica854 жыл бұрын
Thanks for the vid I’ve now broke my full toilet
@olegofsky9 жыл бұрын
Thank you.
@vijaykumarramakrishna76346 жыл бұрын
What if the problem is with the green and white buttons getting stuck. As a result when the buttons on top get pressed, they do not get back to position and water keeps flowing. Does the bottom unit then need replacement?
@tbkhoo8 жыл бұрын
thank you.. very much..
@Ivan688 жыл бұрын
Thanks a lot
@radbabic35327 жыл бұрын
very nce and profesional
@mryux6 жыл бұрын
Thanks.
@gentilhomme76126 жыл бұрын
Genius
@hameedaldeleemy73318 жыл бұрын
Thanks
@jimidavid17312 жыл бұрын
thank u
@jamesbrown-cq2di10 жыл бұрын
thanks
@sadabfa59516 жыл бұрын
thanx
@Vlad220519695 жыл бұрын
Спасибо, разобрался как его разбирать.
@bartekp18687 жыл бұрын
I wonder how i have gone from parkour videos to a tutorial on how to change a flush button on a toilet...
@gryechemohammed42526 жыл бұрын
Thinks
@williamgombert77105 жыл бұрын
Hello, I have one of this kind of Flushvalve that is broken, but ... this model is no longer for sale. Any idea by what model I have to replace it? Best regards
@sylviep9373
4 жыл бұрын
it is this one, on amazon: Geberit Replacement Dual Flush Cistern Valve Main Body Only Twico-1 240.280.00.1
@ascott16632 жыл бұрын
The doesn't work for me because my button does not have a screw and the rods do not come away with the small and large flush buttons. I can remove the buttons but am left with the casing which I cannot remove and still cannot take the lid off the cistern
@spirosbonis4365 жыл бұрын
Thanks . All I want is to see how to open the place of the buttons
@anthonychappell47462 жыл бұрын
One of my rods broke. Where can I buy a rod by itself?
@lilianacoria1493 Жыл бұрын
Puede esplicar en castellano x q n9 entiendo nada y es justo lo q necesito arreglar
@papasmerf37887 жыл бұрын
You can change flush button but you can't change valve.
@House.H8 жыл бұрын
Is this Christopher Hitchens?!
@ellensant86357 жыл бұрын
how do you connect cable that has come off at other end. not push button end?
@DigitalSWebVideos6 жыл бұрын
Throwing the unit away is in most cases stupid. The fault usually lies with the white rubber seal at the bottom of the unit thats in his hand. I'd rather pay £3.00 for a new seal before shelling out nearly £30 for a new unit!
Пікірлер: 88
Excellent Video / Tutorial. Made changing my toilet flush mechanism a real simple task - old out and new one installed and correctly flushing within 45 minutes. Could not have done it without your help and video. And explained in such easy to understand language. Thank you so much.
You are a lifesaver! I live in Indonesia and have been trying to get the commode open for months now. I gave up and googled it... Nothing matched and then I thought of KZread. Took my 20 mins!!! After waiting over a year! Thank you kind Sir!
Thanks mate. The concealed button mechanism had me stumped until you clearly showed me how to remove it on the video. Great!
This is the clearest tutorial I have seen yet. Thanks for getting straight to the point. I found it particularly helpful that you explained how to determine whether it is the inlet valve (ballcock) or the flush valve. That really helped. I have liked and subscribed.
Nice simple instructions and no annoying music unlike a lot of other instructional videos.
Thanks a stack for the clear explanation. The instruction sheet doesn't show you how to remove the main part - so easy with those two clips. Something I found out in a forum - the main valve (a flat grey rubber ring, may leak because it develops small water-filled blisters on the surface. If you want a quick fix you can just pop these with a sharp blade (don't go right through the ring though!), refit and the slow leak's cured.
This helped us a lot! We had no idea how to get the aggregate up. Thanks a lot!
Thanks for sharing this knowledge in such a clear manner. It worked perfectly for me and helped me to fix my broken flush button without having to call a plumber.
Fantastic, been trying to work out how to open the button all day. Thanks v. much.
Top video.......I have been scratching my head on this one for a while. Thanks !
Great video! I have followed the instructions and I have had no problem at all. Everything done ok in five minutes. Thanks for sharing.
Very useful. The fault is often the washer which can be replaced without throwing out the main plastic unit.
Thank you! Saved me from disassembling the whole thing and instead was just unplug and plug the new Valve in place.
Simple and straightrorward - thank you
thank you that was a superb explanation - clear concise and accurate
With the help of this video I have managed to do what two different maintenance guys from holiday letting agent have not managed to do - fix broken Ideal standard dual flush button and adjust Geberit bridge to correct height.
very clear and very comprehensive instructions
excellent video. very professional and knowledgable.
Thanks - very helpful (along with your other video on removing the old-style crescent button version.
Thank you so much. It was helpful and easy to understand.
thanks youtube... i learn how to fix my flush toilet fill valve from this.... very helpful....
thanks ! u helped me! its been an hour i tried to open the top of my toilet until i saw your video!
Thanks you very much. Andy from Poland
Thanks for the info sir! Totally saved my toilet. I was at the end of my nerves and just about to prybar the top
Incredibly helpful, thank you.
Great Video, straight to the point
Thanks for the video. Very helpful!
Excellent tutorial - thank you
* This is a very clear explanation ~ thankyou. The cistern I need to work on is however under a fixed worktop which is only 3cm above the top of the cistern. I won't be able to see what I'm doing ~ I hesitate to attempt to get the flushing mechanism out by reaching in, squeezing the two clips, turning the whole thing horizontal, withdrawing it and then trying to reverse the whole process with a new mechanism. * I don't even know whether there will be enough of a gap under the worktop to withdraw the mechanism, even if it's horizontal , despite the the space created by removing the cover. * Do you know whether it is easy, in particular, to slot a new mechanism into place without being able to see what's happening? * If I'm only successful in unclipping the old mechanism and then either a) can't get it out (and can't then clip it back) or b) can get it out but can't clip the new mechanism in, it's going to be a matter of getting a plumber in or maybe having a quiet word with the builder whose plumber fitted it like this.
thanks for posting. Very helpful
Thanks you..Grazie from Sydney
Muchas gracias ahora se como arreglar mi tanque de agua 👍
Thanks, your video was really helpful!
going to try this today...
Excellent vid, very helpful, thanks
thank you. The information provided is very useful
Great informative video clip thank you for posting it solved my issues
Very useful. Thank you
Thank you. I could not work out how to remove the button :)
thank you, helped alot
Thanks mate ! great job !
thankyou. it's really helpfull
Thank you, very clear!
thanks.. this video just saved my toilet :)
Fantastic! Thank you so much!
Many thanks for this. Possibly saved our marriage.
Great,Thanks for your help
Thank you grateful for the information
Great video, I have noises that come after either buttons are used for flushing just as the water is about to be cut off. Sounds like hammering noise, I believe that this could be an air lock, how do I remedy this please?
Great information thanks
Thanks brother!
Thanks man. I managed to do it after you showed it.
thanks your info👍👍👍
thanks for ur help
Just what I needed. Wasn't sure how to pull valve out. My one, when you flush, the system keeps on flushing and you have to press the top buttons again, for it to stop. Not all the time but about 1 in 20 flushes . Any ideas on what's going on???
thank you :)
Excellent, thank you
@user-eh3qu9ws3d
4 жыл бұрын
اغنيه 7 لا
Thanks for the vid I’ve now broke my full toilet
Thank you.
What if the problem is with the green and white buttons getting stuck. As a result when the buttons on top get pressed, they do not get back to position and water keeps flowing. Does the bottom unit then need replacement?
thank you.. very much..
Thanks a lot
very nce and profesional
Thanks.
Genius
Thanks
thank u
thanks
thanx
Спасибо, разобрался как его разбирать.
I wonder how i have gone from parkour videos to a tutorial on how to change a flush button on a toilet...
Thinks
Hello, I have one of this kind of Flushvalve that is broken, but ... this model is no longer for sale. Any idea by what model I have to replace it? Best regards
@sylviep9373
4 жыл бұрын
it is this one, on amazon: Geberit Replacement Dual Flush Cistern Valve Main Body Only Twico-1 240.280.00.1
The doesn't work for me because my button does not have a screw and the rods do not come away with the small and large flush buttons. I can remove the buttons but am left with the casing which I cannot remove and still cannot take the lid off the cistern
Thanks . All I want is to see how to open the place of the buttons
One of my rods broke. Where can I buy a rod by itself?
Puede esplicar en castellano x q n9 entiendo nada y es justo lo q necesito arreglar
You can change flush button but you can't change valve.
Is this Christopher Hitchens?!
how do you connect cable that has come off at other end. not push button end?
Throwing the unit away is in most cases stupid. The fault usually lies with the white rubber seal at the bottom of the unit thats in his hand. I'd rather pay £3.00 for a new seal before shelling out nearly £30 for a new unit!
R
Camera guy is terrible!
Thanks