Tire Machine Coats 40 40A Removing Tire For HMS
Ойын-сауық
Tire Machine Coats 40 40A Removing Tire For HMS. I had a good start today removing tires for HMS. I got all the tires abound my work bench cleaned, Thanks For Watching.
Send Fan Mail or Product Testing To
Phil Macska
PO Box 6
10348 King George Blvd.
Surrey, B.C. Canada V3T-2W0
E Mail tornadodemo@gmail.com
Special Thanks to all my Members & subscribers for keeping my channel alive
24K Disposal & Salvage Ltd.
Garbage Removal Lower Mainland, B.C. Canada www.24kdisposalandsalvage.com/
Пікірлер: 59
Thank you for sharing this enjoyable video with us seven stars brother
@CanadianTreasureHunter
Ай бұрын
Glad you enjoyed it
Hey Phil. Find one of your local tire shops and ask them if you could buy a wheel weight puller and valve stem puller from them. Might make things a little easier for you. Might have to ask a few different shops
@CanadianTreasureHunter
Ай бұрын
Thanks for the tip!
Hi Phil. Big job and now your work is cleared up.Big mountain of rims should bring a nice payout.Enjoyed vid ery much.Keep up the good work.Thx
@CanadianTreasureHunter
Ай бұрын
Thanks 👍
Great to see the progress. A big chunk of the tires is done and you have more space cleared up. Area around the workbench is looking great.
i'd say about a 1,000lbs.,but they need to be done,and 68 more sitting around the yard that also need to get done,prepping them ahead of time will save you time in the end.great video
Hard Going there great video Again well Done man plenty of HMS Now yard is looking Good well done 👍👏👏👏
@CanadianTreasureHunter
Ай бұрын
Thanks 👍
Phil you do great work in any thing you do your videos are top notch you go
@CanadianTreasureHunter
Ай бұрын
I appreciate that!
👍👍👍👍👍👌Great clean up and production, the little compressor did surprisingly well once you straightened out the power problem, great job, heavy work,,,,,you are the man!!!
@CanadianTreasureHunter
Ай бұрын
Thanks 👍
I think you would need a mist lubricator in line on your air to the tiremachine. That would help it run more easily. That was a tough jobb. Robert Sweden
Good job. Hard work but results are so noticeable.
@CanadianTreasureHunter
Ай бұрын
Yes, thanks
When you are rotating to take first bead off, its very importan to push down the tire on opposite side. This to give space for tire to strech inside the rim.
Don't forget to add subtitles Phil. Thanks.
Great job on the tires! 👍😎👍
U got a lot of them done u still go a lot more. The yard is looking good. You can tell u been really busy
Well done Phil - got all Your Tires done around Your Workbench - that Tire Machine and the Red Air Compressor working Brilliant - a few Tires gave You Problems ! Fantastic Progress - You sounded very Please ! Try that Table Saw out - if works You may gonna use it ! More Tires in the Yard to be done at a later Stage - Glad You had a few Breaks in between and lots of Fluids ! Another Great and Long Video - enjoyed it and many Cheers from Australia !!!!
@CanadianTreasureHunter
Ай бұрын
Thanks 👍
you are tire man thanks
great job I think you could start your own tire yard lol thanks for the great vieo
@CanadianTreasureHunter
Ай бұрын
Thanks 👍
It's like pancakes, Phil. First one always burns or sucks because it is gooey, then you have a great batch, lol
@CanadianTreasureHunter
Ай бұрын
On Film, Off film they come off perfect
Great video
@CanadianTreasureHunter
Ай бұрын
Glad you enjoyed it
Cheers Phil thanks for the video mate 😁😎👍
@CanadianTreasureHunter
Ай бұрын
Any time!
Man that is a bee hive tool😮they are used to scrape wax and pry frames apart,do you keep bees too? You do it all! You can do an engine swap in little red if she finally gives up they aren’t very hard all the stuff I see you doing I’m very confident you could do it.
Subscribe every one.
Processing more than 50 tires on a semi automatic machine is a back breaking job. I am sure your back and shoulders are sore with so much lifting. As you prefer variety, your options are 1) To process your neighbors frames which is less stressful on your back and shoulders, 2) a microwave video. It will be only be wrist work and not much load on your back. 3) Or for a change you can do a HMS rim yard run, tire rubber disposal and all remaining bottle run.
@CanadianTreasureHunter
Ай бұрын
Need to get all the tires done
Great video my friend
@CanadianTreasureHunter
10 күн бұрын
Thank you 👍
SUPER
@CanadianTreasureHunter
Ай бұрын
Thank you! Cheers!
Infelizmente as legendas continuam indisponível. Um abraço do Brasil 🇧🇷🇧🇷
@CanadianTreasureHunter
Ай бұрын
Sorry not sure why?
👍👍👍
I finally got to watch this video. That red tank does the job. I have to know what pressure is it set to? My big tank is factory set to get to 150 psi. I usually shut it of before it gets there. 150 psi is a scary high pressure.
@CanadianTreasureHunter
Ай бұрын
Its set high not sure the pressure 100?
👍🌹💪🇰🇼
we charge min of £5 for picking tires on rims if you was in the UK you could have has many as you wanted
Hi mate do u not have any racing drivers by u that could take some of them tyres Cople of bucks each
Phil,why is the subtitles gone?
@CanadianTreasureHunter
Ай бұрын
They say there on, Not sure what happened
What pressure are you using on the machine. I found a manual that specifies: Air Source The RC100 requires a 5 CFM air source at 150 PSI. The safe operating pressure range is between 110 PSI and 175 PSI at the machine. For motorcycle and ATV tires, this pressure should be regulated to 90-100 PSI at the machine. You work hard but this underpowered machine is far from efficient..
@CanadianTreasureHunter
Ай бұрын
I have it around 100 Need to get a bigger one some day
You still don't have enough air the machine will never work properly if it does not have the air to make it work and when you were taking the bar off it should be only the end that is in the tyre not a quarter of the bar that is not making your life easy you need to get the air situation sorted out otherwise you're making more work for yourself
@CanadianTreasureHunter
Ай бұрын
I have to work with what I got
@noelhenderson8095
Ай бұрын
@@CanadianTreasureHunter I just hope you don't get injured because it is a very high possibility
I think that machine had a sticker on it that said it doesn't work on donut tires the bottom pusher hits the rim i used that same tire machine for years
Where do you go to get rid of the tires
@CanadianTreasureHunter
Ай бұрын
I will do a video today
👍👍👍👍👍