You can buy a file cleaning hand brush. It is flat (maybe 2", 50 mm wide) with many properly spaced short (1/4" tall) metal "hairs" standing up and these hairs fit into the grooves in a file. Works great on fine and coarse files. Drag the brush across the file ata slight angle in the direction of the grain of the file. You may even feel the brush as it glides across the file cleaning the low area of the file (between the file's teeth). A couple passes then move along the file to a new section until you cleaned the complete file or the dirty area.

You’re a life saver man! Great video

@ToyShop9665

25 күн бұрын

Glad it helped! Clutch baskets are expensive!

I've researching this problem 2 months now. Thank you for sharing.

Very good video.Thanks for sharing!

Good video

so i'm just filing away the "hills" a bit and try to keep the "deepest-points" so the perfect contact between both parts does not get falsified (sry for my english)

@ToyShop9665

3 жыл бұрын

EXACTLY!!

@sleiger8855

3 жыл бұрын

@@ToyShop9665 thank u very much

2000 Suzuki 600 katana is the clutch basket but have reverse threads to loose cloc wise

@ToyShop9665

2 жыл бұрын

Thank you for that!

A new basket for my rsv4 costs just under $1000. Guess what I'll be doing on my day off. With the inner barrel it's $1700 if you're curious

@ToyShop9665

Жыл бұрын

Gotta pay to play to have them fancy bikes 😂 I had to look it up. That’s a sweet bike! I hope it works for you. Let us know!

so my bike wen going lurches like a skip would this be it

@ToyShop9665

Ай бұрын

It’s very possible

What file should I buy ?

@ToyShop9665

2 жыл бұрын

I just posted a link in the description! Check it out!

My man I got a real question will those grooves in the clutch make your clutch pull really stiff? My basket was terribly grooved.

@ToyShop9665

2 жыл бұрын

Um not usually that I’ve experienced. A lot of times that’s in your cable. Try taking your cable off from the lever and the arm on the case and see if you can pull the cable in and out easily.

@LiamMorris

2 жыл бұрын

@@ToyShop9665 iv got the same issue on my kx250, replaced the clutch cable and still hard to pull. Basket looks grooved so am thinkinh that is the issue

@ToyShop9665

2 жыл бұрын

@@LiamMorris I’ve had the cable routing wrong before and that has made it hard to move. I had to pull the tank off and reroute it and it got way easier. Just another option to try 🤷🏻‍♂️

@LiamMorris

2 жыл бұрын

@@ToyShop9665 that could also be my issue. Will look into it. Cheers

@lucasv7348

7 ай бұрын

@@LiamMorrishey man I got the same exact problem on my yz250 2t aswell, I’ve replaced everything clutch cable clutch push rod clutch arm new fibers and springs everything and finally I’ve narrowed it down to the super grooved clutched basket ima file it down tmr and see how it goes

I just filed my one 3rd time Why are they making it from so soft material so annoying. Any time it's gets hills, it's slipping in high gear. as its preventing go closer and tight.

@ToyShop9665

2 жыл бұрын

I’m assuming weight and cost. 🤷🏻‍♂️ I bought an aftermarket Barnett basket for one of my race bikes and it actually has steel there to prevent this.

@vladcontact

2 жыл бұрын

@Toy Shop 9665 Unfortunately, they don't do my model Vfr1200f Im stuck with original parts