Thank you Sir. This is excellent content for a newcomer like me. I just bought my first plasma cutter a powermax 45xp. I’m thrilled. I’ll be watching.

Great information, I really hope to achieve a straight accurate cut in our thickness range. It's tough to train kids on non cnc oxy fuel

I have a Powermax 45 xp. In the Hypertherm manual charts only apply to the maximum power of 45 A, it would have been nice to have charts for several range of power. To figure out the formula between speed, thickness and amperage.

thanks for the explanation, very clear and useful.!!!

@cameronmakai3344

2 жыл бұрын

instablaster...

18 yrs ago I worked in fabricating signshop, steel & alum. Never run a plasma table, just handheld. I now am looking to build a shop. I need all the help I can get.

When I cut 1/4 plate I use 65 amp and slow it down to 88. I get a good edge.

"do you need a 125a? probably not" lmao here i am with 260a wanting to get 400a some day

Hi I have a plasma table with a Hypertherm 45 xp what thickness of mild steel will it penetrate I only tried 5mm

My Powermax 45xp has a warning in the manual that the esters in synthetic compressor oil can damage the filter bowl. Is this enough of an issue to require an oil less air compressor or will a coalescing filter take care of this issue? 60-80 gallon oil free air compressors are hard to find.

@truthserum9157

2 жыл бұрын

Use an all metal air filter bowl will do the trick, the longer a compressor runs the hotter it gets, the hotter it gets the more oil goes down line, use a coalescing filter after the particulate filter with all metal bowls.

Please clear background music

🇺🇸👍👍👍👍👍👍👍👍

Whats better air or argon for fine cut powermax 45

@kjb21161

3 жыл бұрын

air is fine

@tollav

2 жыл бұрын

This is not like welding. The gas does not shield it pushes the plasma and slag through the part. Plus at ~75psi a full sized tank of argon is gone in no time.

Is Jim Colt with Arclight Dynamics now? I understand he is no longer with Hypertherm...

@TheBoatman11

4 жыл бұрын

NO

@martyscncgarage5275

4 жыл бұрын

@@TheBoatman11 so do you know where Jim ended up? He's not with Hypertherm

@TheBoatman11

4 жыл бұрын

martyscncgarage he is a constant for Hypertherm now

@larryrobinson7492

4 жыл бұрын

I believe he retired after more than 40 yrs with Hypertherm, still lives in New Hampshire and does some Consulting work for them. He is in alot of the Facebook Plasma forums so I'm guessing that is part of his Consulting work keeping the Hypertherm Users educated or he's just a great guy and loves to help others...Who knows ??

@foxwood67

3 жыл бұрын

Jim is a wealth of knowledge. I own a TD cutmaster 58 and it has performed flawlessly for 1.5 years. Even though I don’t own a Hypertherm I’ve gotten a lot of useful information from him.

Can you help me.i need set up for 15 mm steal.need cutting speed.im cutting at 1000mm/min.

Ambiant air is 20 % oxygen 80 % nitrogen, I am not sure about that

@Ladarian_

2 жыл бұрын

lol ok

@bpdp379

7 ай бұрын

According to NASA it is 21% Oxygen 78% Nitrogen and 1% everything else…