USE THIS LINK FOR A DISCOUNT ON YOUR LANGMUIR CROSSFIRE PRO PURCHASE!! store.langmuirsystems.com/discount/SPICERDESIGNS Use Promo code SPICERDESIGNS to save $100

Hi, Doug and Adam sent me. 🤠

Came here from Hometown Acres, like the educational videos and your sense of humor! Subscribed!

@SpicerDesignsLLC

Жыл бұрын

Thank you. Hope you enjoy our videos. I try to keep them somewhat entertaining.

Great video, Kyle. I just discovered your channel a few days ago. Been watching all your plasma videos. Love the signs you've made. You do great work. Hopefully, me and my Crossfire Pro will be doing some similar stuff soon.

I ordered a Langmuir pro yesterday, your videos played a large part in providing the information needed to make that decision. Thank you for the help!

@SpicerDesignsLLC

Жыл бұрын

Glad to hear. Make sure to use the promo. Will save you $100. Feel free to email me if you have any questions on the new machine. Ill do my best to answer them.

I have the Lotos 5500d. As all china products, it's a little over rated but works great so far.

Just subscribed seen you on Hometown

Good cost break down video Kyle. Now it's time to see you get dirty with that kioti! Also crushing some cold keystones. 🍻

@SpicerDesignsLLC

Жыл бұрын

I know. Long overdue. I have a good one coming my next week

Thanks for the video. I'm in the planning process of a similar start-up. Other videos recommended pricier equipment, thanks for sharing more cost effective options and describing minimum requirements for getting started. This knocks down my projected inital costs substantially! Can always upgrade at a later time

@SpicerDesignsLLC

Жыл бұрын

Glad it was helpful for you. Its always nice to test the waters before you go all in. Thanks for the comment and good luck!

Doug n adam sent me too.

@SpicerDesignsLLC

Жыл бұрын

Thanks for checking out the channel! Hope you enjoy our videos.

I ordered my crossfire Pro last Friday and it’s supposed to be delivered here on Thursday so shipping and getting orders out has been ahead of schedule. One note on discounts: most of the discounts will provide $100 off but the free shipping discount can’t be combined with any others, so if someone is looking to pull the trigger obviously you’re better off saving the $250 on shipping. Great content buddy, I enjoy your videos and the subtle humor!

@SpicerDesignsLLC

Жыл бұрын

Thats a bummer. Im going to ask them about that. Defeats the purpose of me having a promo code. Thanks for the comment. Enjoy your new machine. I had to wait like 2 months for mine.

Nice breakdown in price..

Wait, you missed one cost…. How much for that bad a$$ hair cut? 😂 You are gonna look so cute up on my big rock!😜😆

Bro, I do the same thing with my hat haha. I just founded my plasma CNC business this recent Father's Day. Thank you for all the helpful insight approaching it from the business angle (pun?). Much love from Texas.

@SpicerDesignsLLC

Жыл бұрын

Congratulations! Best of luck. If you have any questions feel free to reach out. Im not an expert but ill share what i know.

@joshuacaylor881

Жыл бұрын

@@SpicerDesignsLLC Man, you are awesome. I will probably send you direct message later to pick your brain if that's alright. I know you're busy- I am appreciative of any opportunity to network with you. Take care 🙂

@SpicerDesignsLLC

Жыл бұрын

@@joshuacaylor881 ya just email me or DM on instagram. Id be happy to chat with you.

What a Succinct breakdown of everything

@SpicerDesignsLLC

9 ай бұрын

Ill be honest, i have no idea what succinct means. Hopefully good.

May not stay in that house? Kyle, you’ve got a beautiful place that’s somewhat secluded…

@SpicerDesignsLLC

Жыл бұрын

I know. I just built this place three years ago. Theres still a lot left to do and i need to build pole barn. People are flooding into this county from Illinois and chicago because its awful there. So we just want out of this county. Id like to get more land and something with outbuildings. Taxes here are through the roof now because of the influx.

@2020Tundra

Жыл бұрын

@@SpicerDesignsLLC Thanks for explaining why you’re wanting to move… I completely understand and don’t blame you. I hope you find a more suitable place for your family soon!!

I think I'll build one from JD's Garage plans.

Looking to start a fabrication side business. Great video

@SpicerDesignsLLC

Жыл бұрын

Hope it was helpful. Thanks for watching!

I’ve been wanting to start a CNC Plasma business for a while, and I have a friend wanting me to come up with a business proposal on story upfront cost, not gonna lie. It’s pretty nerve-racking to think about.

@SpicerDesignsLLC

6 ай бұрын

The setup is show in this video is pretty cheap to get into for what you can produce. This table pays for its self pretty quick. Just have to get through the learning curve.

1st

Would you like to come out to one of my locations and try out our table and rotary. Vacation/work

@SpicerDesignsLLC

Жыл бұрын

Where are you located?

@RaceMentally

Жыл бұрын

@@SpicerDesignsLLC west coast. Lake Havasu and San Diego

You have the 30 gallon air compressor but you have the 27 gallon on this video. Will it still work?

Wait... How does a 45amp cutter run on that 240v30a outlet? Shouldn't it be a 50a outlet? Also, what 'more' could you do with a larger table with air downdraft exhaust instead of water? Besides just bigger signs...🍻

@SpicerDesignsLLC

Жыл бұрын

The output is DC. So the DC output amps dont match the AC input amps. Just like a welder. So 30 amps will run it at full power. Bigger table i would do larger signs and i could leave a 4x8 sheet on it and nest all my cuts. Just more efficient. Thanks for the comment.

@JupiterMoJo

Жыл бұрын

@@SpicerDesignsLLC ok, got it... 👍

@onefortheroad2291

Жыл бұрын

Plus it doesn’t run at full voltage. Amps x voltage = wattage. It’s why for example my 220v tig welder maxes out at 225 amps despite running on a 60 amp breaker

How much is fusion 360?. Can you use the plasma table without cad software?

@SpicerDesignsLLC

Жыл бұрын

Fusion is free for personal use. After a year they restrict some of the features. I believe you will need some kind of software to create the cut path. You can download some files that are ready to cut too. Eventually you would need some kind of cad software.

It looks like this table requires use of Langmuir’s software: FIRECONTROL, right? It doesn’t look like they charge for their software - is that correct? Also, are you still using their software or can you use other software with this machine too? Thanks for your time and review!

@SpicerDesignsLLC

Жыл бұрын

It does require their software and there is no cost. I currently use still use it. I have nothing to compare it to but it works well. Hope that helps.

@paraglidingprospector

Жыл бұрын

@@SpicerDesignsLLC Helps a ton! Thanks!

Dose the langmuir software at the table need to be on wifi? I ask cause I work in a detached garage away from my house and my wifi don't reach out that far. I am looking at the pro table. Can I make my cut file inside the house then input it into the software then walk out plug my laptop into the table and start cutting

@SpicerDesignsLLC

8 ай бұрын

Ya you dont need wifi. I can make a design on fusion. Open it on firecontrol and cut it with no wifi.

@batyote2771

8 ай бұрын

Thanks! Awsome videos, I just found you and going through your vids. Love the puns!

@SpicerDesignsLLC

8 ай бұрын

@@batyote2771 thanks! Glad your liking it. We try to keep things fun on the channel. Good variety too

Thanks for the info, I built my own.... its 50"×50". wanted to be able to cut right to the edge.... Anyways now Im working on upping my marketing game... Just put together a new website for the first step. Any suggestions there? Dig this series.

@SpicerDesignsLLC

Жыл бұрын

Thats pretty cool you built your own. I have a marketing video too. It was the video before this one. Just some tips that work for me.

@customsolutionsinc

Жыл бұрын

@@SpicerDesignsLLC saw that, good vid. Gonna watch again.

I been wanting to order this table just not sure if I am capable of learning the programing/designing part. I have a Powermax45 and Primeweld Cut60 plasma cutter. Great info.

@SpicerDesignsLLC

Жыл бұрын

Its really not that bad. Just start with simple designs and youll get better. Can always practice some cad work before you buy. The fusion software is free for personal use.

Just found your channel, like your setup. What machine torch did you go with? I did the same thing and got the hand torch originally, and wish I would have done the machine torch. What consumables does your machine torch use, and how are they lasting. Great channel, thanks.

@SpicerDesignsLLC

Жыл бұрын

I tried to get the one from Langmuirs website but they were out of stock. I found one online that’s compatible with hypertherm consumables. Id like to try the fine cut consumables next.

@kwasg3

Жыл бұрын

@@SpicerDesignsLLC Link by chance? Thanks for the reply

Do you ever run into air supply issues due to the compressor being rated at 5.1scfm at 90psi when langmuir recommends 6scfm? Just got my table set up but I'm still shopping around for a compressor

@SpicerDesignsLLC

Ай бұрын

Ive never had any issues with air luckily. I already had that compressor when i got the table and it worked, so i used it. Definitely the bare minimum.

@deanbrooks5208

Ай бұрын

@@SpicerDesignsLLC right on, thanks for the quick reply! And the good content. Literally watched all your plasma table videos before making the purchase

@deanbrooks5208

Ай бұрын

Alright I picked up the compressor. Next question for ya What size hose are you running? Alot of guys are saying to run 1/2" but the outlet on the husky compressor is either 3/8 or 1/4" haven't measured yet but it definitely isn't 1/2" Even the Razor cutter doesn't have a 1/2" input

@SpicerDesignsLLC

Ай бұрын

@deanbrooks5208 i just run a 3/8 hose. Never had an issue.

What is the cost of the software for the CNC?

@SpicerDesignsLLC

9 ай бұрын

The software for the langmuir table is free. The cad software fusion 360 is free for the first year and for personal use. Youll have to check the link in the description to see their current pricing.

@johndemattia1091

9 ай бұрын

Thank you for the quick reply. Today was the first day finding out about you and your videos. You have done a great job of informing others and keeping them fun/interesting. Thank you! @@SpicerDesignsLLC

@SpicerDesignsLLC

9 ай бұрын

@@johndemattia1091 thanks John. I appreciate that.

What size wire do you need for the 220v outlet for the plasma cutter?

@SpicerDesignsLLC

Жыл бұрын

Depends on what plasma cutter you get. 30 amp circuit requires min of 10awg. 40-50 amp requires 8awg. Preferably stranded wire.

@69jokerking

Жыл бұрын

@@SpicerDesignsLLC I appreciate you getting back with me. I got the plasma cutter that langmuir offered with their table

@SpicerDesignsLLC

Жыл бұрын

@@69jokerking the 45 am. I have mine on a 240v 30 amp circuit with 10 awg wire. I use that for my mig welder too. Its worked great for me. Can always use 8 awg if you plan to upgrade one day.

@69jokerking

Жыл бұрын

@@SpicerDesignsLLC thanks so much

Jennifer Camarillo

First time viewer....liking what I see (on many levels). Can't help but get some mixed messages, though...... Yee-Yee, Gold Old Boy, **HOT** wife in R-W&B..... and Carhartt???? I'm hoping that Carhartt's wokeness isn't a part of your thing.

@SpicerDesignsLLC

Жыл бұрын

Ya we have all kinds of variety. No wokeness here. Ill have to look into that. Glad your liking it so far. Thanks for the comment!

dude thats way overpriced , i got an industrial grade 2m*4m like 12ft*6ft table with the 120A source for 5500$ and they included a 7.5KW air compressor too, to be honest i got it from china but if I was to source it locally it would've cost me 20K+$ I decided to get some add ons too like a 3kw drilling head with a pen plotter and added an oxy-acetelyn head just in case we had something over 4inches and we got the remote controller for the table all this ended up costing us 8200$ and shipping to lebanon cost me 1000$ its been running about 8-10hrs a day for years and never had issues I

@SpicerDesignsLLC

10 ай бұрын

Well thats great but that doesnt mean that this table is way overpriced. You just found a cheap table from China. Glad its working out for you.

Cnc algorithm