Amazon Paid Affiliate Links Below *Use the Hynade Amazon Promo code 05MIKEWELD at checkout and save 5%* Here's the link to the Hynade CUT60DN CNC Blow back pilot arc plasma amzn.to/3G3oxhj Plasma Consumables for CUT60DN amzn.to/3Myn1Gu

@BrandonBurns1985

2 жыл бұрын

Code doesn't work 🤷‍♂️

@parkerwilstead1037

2 жыл бұрын

How has the machine treated you so far. About to pull the trigger but wanted to see if it’s taken a dump on you.

@MRSketch09

Жыл бұрын

So how's it held up for the past few months?

@jessedavis3641

Жыл бұрын

Code doesn’t work. How has it held up over the last 3 months?

@WizmakerLaser

Жыл бұрын

Hello Mike! How can i get in touch with you?

Great idea with the outward notch for the break line! I have always done inward notches.

Another fantastic video Mike! Thank you for taking the time to make these review videos. They are great. Not everyone has boatloads of money to spend on professional equipment, so it's nice to see more budget friendly options.

@Mikefestiva

2 жыл бұрын

Appreciate it Jerry 👍

Mike - Thanks for the new review. Also, thanks for the neat tip for the bend location marker. That’s really clever and what I live about your followers. We all get better. 👍👍😎👍👍

mike is the best. i wouldn’t have bought a Langmuir without you. i also bought a hynade cut 60 couldnt be happier

Great video Mike. Was wanting one and then I see this video so, you talked me into it. Just arrived and tested it out. Amazing. Eventually it will be paired up with the Crossfire table. Getting close to start fabbing up some fun machines like you.

I bought the last one you recommended from Amazon. I never even got to use it and a friend of mine had to have it.. so he bought it off me. Then I found out they no longer carry it so I was in the market for another. Thank you.

great video thank you for taking the time to put this together, looks like you have a nice set up

@Mikefestiva

2 жыл бұрын

Thanks for checking out my new video Antonio 🙂👍

Mike - I really appreciate the thought process you inject into the videos and how you do something, design something and go through the process. This was an awesome look into how to setup plasma on a water table. Looking forward to when I have a setup!

@Mikefestiva

2 жыл бұрын

Thanks for checking out my new video Roger! Yes I like to add extra info to help others. I actually always want to add more but some folks gripe about me talking too much 😂 it’s a balance I guess 👍 Take care and have a great weekend!

@brandenpatterson2776

2 жыл бұрын

@@Mikefestiva never worry your true fans will always love the extra info!

Great video Mike, really contemplating this one as I would like a CNC down the road.

Nice ! Thank U! For the shared Research! This is VERY Empowering! I am a 35 year Veteran . Custom Mobile Welding Professional. Time to settle down and work from Home 😎

Awesome video!! You amaze me every time with your fab skills, you make it look so easy!! Thanks for sharing I’m really glad you made this video!!

your videos have helped very many of us who are just getting started thank you Chris H

@Mikefestiva

2 жыл бұрын

Thanks Chris

11:29! Got really excited for a drum break! It's ok... great video Mike!!

Thanks, I purchased a pro for the Ag Shop thanks to some great donors. We went with the Hynade Cut80 and the machine torch. It is cutting great.

That little triangle indicator mark is brilliant who would have thought it I mean seriously what a genius little simple thing

Another great product review video Mike. I am so glad that you do these since I, and a couple of my friends, are very interested in these same tools. You also do a great job on your project videos. You have great ingenuity and an ability to think outside of the box. Keep up the great work! Also, it is cool that you are a fellow western Washingtonian (I live on Camano Island). Two thumbs up!

@Mikefestiva

2 жыл бұрын

Right on David! Thanks for checking out my videos 🙂 Awesome you are in wester Washington as well 👍

Another great video Mike. It's great to have a plasma cutter and a CNC table with it, very useful tools to have.

@Mikefestiva

2 жыл бұрын

Thank you 👍

You make some of the best videos on KZread. Thank you.

@Mikefestiva

2 жыл бұрын

ha thank you so much 👍

So refreshing to find someone that understand what is good enough, not necessarily the best. The majority of your viewers are weekend warriors, and you understand that.

@Mikefestiva

2 жыл бұрын

Awesome thanks Landon

Well now I want a table too, not sure exactly what I would make but my mind is always thinking of something. Thanks for everything

Another great vid Mike! Big inspiration to me for sure…thanks for the upload and all the great content over the years..:)

@Mikefestiva

2 жыл бұрын

Thanks for checking out my new video! I really appreciate it 🙂👍

Super looking forward to an update on this

Really great video, and an awsome how to on getting it all set up and working great. Love the content Mike! Always enjoy watching your videos!

@Mikefestiva

2 жыл бұрын

Right on thanks a lot 👍

I have had this on my wish list for a couple months, I think it has been since you did the video on the bestarc, I decided to pull the trigger based on this video! I think this is going to work well for when I finally build my plasma table.

@Mikefestiva

2 жыл бұрын

So far it’s been working great 👍 Definitely nice to have plug and play CNC ports and affordable consumables 🙂

Great video Mike, thanks for making it!

@Mikefestiva

2 жыл бұрын

Thanks Sean

One of my favorite KZreadrs. Keep up the good work man. I followed you on your 212 dirtbike build. I put a 79 predator on a razor bike

@Mikefestiva

2 жыл бұрын

Thanks Kyle for watching

I was on the fence about Bauer rust buster, but as usual, you've been the convincing recommendation. Not what I expected from the vid, but great bonus content! ✌️

@Mikefestiva

2 жыл бұрын

That tool definitely does well on removing old rust and paint. Definitely worth having in your shop. Thanks for checking out my new video 🙂 Have a great weekend 👍

Nice to see some Crossfire action. I am hoping to get mine finally cutting this evening.

@Mikefestiva

2 жыл бұрын

Awesome man! 👍

Wow! What an amazing machine. Id love to nab one of those plasma cutters someday.

Thank you Mike! Definitely considering this for my homemade build! Cheers!

@Mikefestiva

Жыл бұрын

Right on! Do you have any videos posted of your build on YT?

Love the tool tray!

I hit your like button as soon as I click the video. Always great content Mike.

Looks a lot like the herocut I bought for my homemade cnc table a couple years ago and I was sad to see they dont offer it anymore. Nice to see other affoardable option of blowback machines available

I must have the videos mixed up, I was looking for the link to the break bend table. Thanks again Mike.

Great content as always.

Just dropping them knowledge bombs left and right, thanks @Mike!!!

@Mikefestiva

2 жыл бұрын

Thanks Tom! Have a great weekend 🙂👍

Beast little cutter.

You just saved me $400!!!

I hope to get a plasma cutter someday. Thanks for the information.

@Mikefestiva

Жыл бұрын

They are really handy to have in the shop, I definitely recommend getting one, I think you would get a lot of use out of one 🙂👍

Thanks, another great video.

Go Mike GO!!!

Love it Mike! Thanks for the great vid. and the links :) Cheers! Gary

@Mikefestiva

2 жыл бұрын

Thanks for watching Gary

Hope to see more actual projects.

Hi Mike..thank for video very good plasma..i like it..

Hi Mike, I've watched all of your reviews on plasma cutters as I've been in the market myself. I'm planning on a handheld machine, but I have some dexterity issues. I run a manual only shop and I'm not interested in bringing a computer in. I do have interest in a plasma table, just not CNC. Back in the days of torch cutting, there were pattern tables that allowed you to mimic most basic shapes. More useful to my needs, there used to be a popular accessory that was nothing more than a guide rail about 18 inches long that assured a straight cut. I was kind of planning on manufacturing a water table and some simple rail system like this. I will almost definitely be building it in such a way that the plasma cutter can be quickly removed to be used manually. I believe at least 60% of the time I will just want fast casual cuts like this. I was fairly set on the best Arc until this video. It can be rather difficult to compare these side by side. I don't have any firsthand experience running a plasma cutter though I'm very familiar with a machine shop otherwise. For my particular use case, do you think having these CNC ready features would still be beneficial? Are there any downsides to normal manual use? Thank you in advance for any guidance you have to offer

thanks Mike.

Hey Mike, Great video as usual and thanks for demo'ing the Bauer surfacing tool. Not available on line yet, so I'm going to HF Sat and buy me one. I have a few Bauer corded tools and really love 'em. Also love my Hynade flux core welder and my Bestarc cut55 plasma. I'm going to have to quit watching your channel, because you're causing me to spend too much $$ on tools/welders, LOL. Cheers.

@Mikefestiva

2 жыл бұрын

ha ha thank for watching 👍

🇦🇬 Great teaching videos. Suggest replacing water with coolant; will cut down on rust too. Green’s a nice color. 🙇🏾‍♂️

Excellent "real" review. I was astonished that there wasn't any inserted humor pics in the video. I need a plasma cutter so this might be the one for me.

@Mikefestiva

2 жыл бұрын

Thanks for checking out my new video Jon! I mentioned in the end of the video I have owned the Hynade plasma for 3 months but that shot was taken 2 months ago so I actually have had it for about 5 months and it’s still working really well. Sometimes I do like to hide like things in my videos but didn’t got around to it in this one. Tell you what, I have a Pinzgauer video coming out in Two weeks, I will add a little something in there for you Jon 🙂👍

@jondavidmcnabb

2 жыл бұрын

@@Mikefestiva SOLID!!!!

excellent mike thenk yuo

I saw Jegs had one for like $300. Might try it

Good info Mike! Seems like a good unit/price that you can run on the CNC!

@Mikefestiva

2 жыл бұрын

Thanks for watching!!!

Excellent 👍

Mike, this out of sequence but a thought you may see & use on the center-articulation tractor you build removable front fenders for. Since you can remove then in the field, find a spot and weld two squares these can be stored in. Like the side the the dump bed! It is better that tossing them into the back to get scratches or bent. Just a thought. I worked on our family farm equipment since I was the oldest but this was before you were born. But leaving home at 14 (Family issues) but never went to tech school or high school did have a shop. But I spent my entire life working on vehicles & the last 7 teaching & holding tech seminars in 7 Midwest states before Dr. pulled the plug on working. Had a boss argue for 20 minutes to run a rented jumping jack earth compactor at 28 and destroyed my back. It got better to work at dealer, but old age has this “arthritis” thing and had 11 procedures, finally implant with spinal electrodes and they placed them wrong. So can’t even walk, just enough to mail box. Enjoyed the build surround by tools and use them ten minutes out of every 2-3 hrs. I had no cell since 2008 and KZread has been fun. I have to learn aftermarket parts to build a 67 C10 to have a vehicle. At 6’ 3”, I don’t fit well in most even average weight but getting in & out is real hard. The truck fits and given free. A EFI Tahoe engine will make reliable and the OD auto I built on bench 2019 will help with fuel and made to handle 600HP with a basic stock 390 HO engine so I don’t have do repairs. All GM parts that are common & priced well. But, I have to get room in my garage as it is a 1 1/2 car to begin! Enjoy the vids, but having a place to hang your fenders when off is an idea.

Mike, could you also do a review or short suggested air compressor size recommended for running the plasma torches and setups in your opinion. Thank you! Two Thumbz 👍👍

Mike I really like your videos, they are very informative. I would love to here what you think on the Yeswelder YWM-211P and their CUT-60DS

Hello Mike, this is the first video of yours I have watched. It was quite informative and I enjoyed it. I was wondering what THC controller that you are running? Also, is there a Video that describes the grounding setup you used.

YES, it IS Amazing how much cheaper the "Plasma Cutter's" are now-a-days. my first one cost me over $3500.00 back in the mid-1990's and it Was Huge also an "Console Unit". Thanks for the Tip's in this video and the Saving's too I just might get one of these and try it out, Thanks.

@Mikefestiva

2 жыл бұрын

It’s definitely crazy how cost has come down along with the size of the welders and plasma cutters now days! Thanks for checking out my new video 👍🙂

@DannyWalker1949

2 жыл бұрын

@@Mikefestiva ❤👍

Really like your videos! Looking at getting a plasma cutter but was wondering what size air compressor are you running with your plasma cutters?

Thank you for a great video. I am running a Hypertherm machine that causes constant issues. Are these newer machines less prone to problems?

Mike, I plan to make a magnetic hold down for my shop. I'll probably use the coils from the clutch from car ac compressors. They're 12v and made to run long duty cycles.

@frederickshipp8013

2 жыл бұрын

Bryant Fry, Thanks for sharing that idea.

Excellent! I'm building a new CNC, and would like to add a plasma cutter so I'm watching and learning. It's good to get a recommendation to know what the price of entry is, and what to look for for this type of application. It looks like there is a straight torch cutting head available too.

Good review my friend✅

Just wanted to say "thanks" for posting this. I had JUST purchased a similar machine on Amazon but then cancelled that order and purchased this one (and with your discount code it wasn't that much more :) Really appreciate it. Quick question: Which water filter/trap did you end up putting on the unit?

you might want to check out the primeweld cut60 same features has cnc connection and it has a full 3 year warranty

Got a little 110/220 flux core machine from these guys for my work trailer. It does have some odd way to setbit, but it is incredibly impressive what it will weld on 110v. Its been reliable thus far and has worked every time i pull it out. Hopefully it works long term but it has already paid for itself. Now i need a plasma. I have nice welders in the shop, but a plasma is so "simple" i have a hard tkme spending big bucks on one. Shouldn't be all that expensive imho

Curious what you would recommend if someone wanted only one budget welder!? Great video!

Finally! Someone who asks for the like and subscribe at the end once you've experienced the product.

Great video Mike would have love to seen some free hand cuts with it but i get you were trying to go apples to apples and how thick can it cut? Thank you so much for all you do!

@Mikefestiva

2 жыл бұрын

Thanks for watching

Just tried to check out with the 80 version of this, the promo code said it cannot be used? Love the videos and the info.

Very nice. You should sell of if these “kits” you make. Without the room currently for a -kasha table, I would buy one. It’s too much hassle to make otherwise.

Thanks for the reviews you do. I was wondering if you could do one for a shop starter. 1500$ ish budget to get plasma/mig/tig ideally with ac for aluminum. I know this has always been a trouble for me and I am sure others. Having a guide to that point would be of great help to getting a good shop started even if it is piece by piece.

Mike I am starting down the same path that you took with regards to getting a plasma table. I think I am also going exactly the same path in that I am leaning heavily towards the Crossfire vs the Pro due to space and the ability to move it around. I primarily build muscle cars but also an odd project from time to time. I wanted to know if you still recommend this plasma cutter or not?

Hi Mike: I think I saw a video that you made, over on Amazon, for the ARCFONY Cut53N plasma, cutter, and the ARCDROID. At least somebody did a really good impersonation of your voice if it was not you! I’m about ready to pull the trigger on that Cut53N, as it looks really good with the exact features I want such as a front panel pressure gauge. In truth, I am probably going to have bought it by the time you put out a video on it. But just in case you are about ready to pull your own trigger on releasing that video, know that there is someone here that would dearly love to have a confirmation that this is a good purchase. I’m also very interested to hear your assessment of the arcdroid. Really, I was only looking for a simple plasma cutter with blow back pilot arc, and a Front panel pressure gauge, and of course, for a lowest price. It’s amazing how difficult that combination seems to be. Plenty of high frequency, low-cost options, but getting what I wanted appears to have been difficult. I was not overtly looking for the CNC, but if I can get exactly what I want in the other areas, and only have to pay a few more dollars for the CNC, then I think that raises this product to a bye. Thanks for all you do!

@Mikefestiva

Жыл бұрын

Hey that’s probably a video from me, I sent one to the guys at Arcfony showing them that the plasma works great on the Arcdroid. They sent it out to me about 5 months ago to see if I liked it, they have been showing me photos and talking about features with me for the past year as they developed it. It’s been a great plasma so far especially for the bargain price. I have a video coming out next Friday showing how I made a down draft cutting table for my Arcdroid, the Arcfony Cut53N is used in that video as well. I think you will like the video. I plan to cover a few more videos using the Arcfony with the Arcdroid this summer on projects. Take care 😊👍 Ps I’m talking with them about a 05MIKEWELD promo code that would save people 5%. Hopefully I can get that worked out when the video post on Friday 👍

Hi Mike, based on your recommendation i just purchased the Hynade CUT 60DN - using your link. All this is new to me and I could follow along with your wiring instruction until it came to the 4 pin connector. How did you wire that connector? I only got the connector tip. Thanks much!

Would this work with their height control? Also will you be doing any more videos on fusion 360? I have been slowly watching all your videos, you have inspired me to get a crossfire 2x2 table. Im ordering it this week.

Great video. Mike how thick will this cut clean ? Need to make a purchase before I retire. This and a tig machine.

Great video. Bought a Hynade 140D mig and like it, what is your opinion on their MTA 225 SG ? Thank You

Can you cut thin gauge steel using this on your crossfire? Have you tried something closer to 24 gauge steel? Thank you for taking the time to make these types of videos!

Sir! thannnnkkk you very helpful! What compressor size is needed?

MM77 Approved 👍🏼👍🏼

when I grow up I want to be like you

Mike any idea how many CFM of air this machine (60 amp) and the 80 amp machine require? Didn't see it in the specs. Nice demo, great low cost machine. Dan

Awesome , Mahalo

Alright mike yeswelder vs primeweld. Cannot find a head to head comparison between the two. I’m leaning towards a yeswelder but for the money primeweld looks pretty dang good to. Considering for 500 bucks the one setup comes with a spool gun. Would be great to hear your thoughts

I've been wanting something like this for a while now. I've always been concerned about having it in a Michigan garage that isn't heated. You made sure to point out that you had ice on your table. Is the cold not as big of a concern as I make it out to be? Obviously, if it's in my garage I would probably drain the table in the winter during periods of non use.

Hay Mikes watch most of your videos! In one of them you used a template that had different size round holes and slots that were also different shapes . Did you make that or buy it ? Nice addition for hand cutting I would like to have one if you can tell me where to get one . Maybe put it on Langmuir share page

Are the consumables used by the Hynade CUT60DN proprietary? Will consumables from Hypertherm, Miller, Lincoln or other established brands work? I am considering a purchase of the Hynade CUT80DN but concerned of availability of consumables in the future. I purchase the crossfire pro CNC plasma table based on your recommendations and review of the product and had no regrets . I would be comfortable to buy the Hynade plasma cutter based on your review only unsure about the availability of consumables in the future. Thank you for sharing your project builds with us.

Have you tried that surfacing tool on any carbon diamond plate? I need to clean the rust off of a couple 4' x 8' sheets and if that thing will work on them, I need to go get it. Wasn't sure if it would get in between the raised diamonds or not.

I followed your lead and bought the Cut60DN plasma cutter from Hynade a few days ago. I have been trying to wire up my Langmuir table with the THC module, but I am having some issues with trying to get everything connected up properly. There are a Torch On/Off connection and a THC connection that are both mounted on the Langmuir control box, that I assume need wires connected to both for them to work properly. I also bought a Torch Height Control Module and there are a lot of connections to be made to it There are the DIV INPUT, the DIV OUTPUT, the PV OUTPUT , and those are the ones located on the ends. Then there are two more connections, one marked TORCH (black) and one marked CLAMP. (red) on the flat sides. I probably forgot to mention that I am very electrical wiring challenged when it comes to making up proper connections. CN YOU HELP ME PLEASE?!

Hey Mike! I just bought this Hynade Cut60-DN for my Crossfire Pro CNC Table but can't find the csfm rating to know what compressor size I will need. Hobby use, only a few hours per week but anticipate some longer/larger cuts at some point. I don't want to undersize but don't want to break the bank either.

Hey sir! Thank you for making this video. I was on the fence about what to buy. I had ordered the CUT80, but it never arrived. Amazon said it was lost in shipping but looking at the tracking info, it never shipped. Any way, I ordered the CUT60 instead, as they had that one in a local warehouse. I was still considering the primeweld. I have there TIG 255 and love it. But after watching your video I am going to give the Hynade a try. Do you have any setting information for the CUT60 to set up the THC and the post for the CNC setup. The manual that comes with it did not provide any Torch working height, piercing, arc voltage, or piercing delay recommendations, nor any kerf width setting. I know these will have to be tweaked for my machine, but it would be nice to have a starting point.

@mikefestiva, What did you connect the arc voltage and signal control to on your cnc cutter?

Hey Mike, did you happen to put together a cheat sheet for this plasma, speeds and feeds?

Having seen this I find myself curious as to how well a MIG or TIG would perform along these same lines.

Hello Mike, If I buy the smaller crossfire, can I later just buy/build longer rails to expand it?

@Mikefestiva have you heard anything from Hynade that they might be closing? I currently have there plasma and my cnc and like it and thinking about upgrading to there welder but don't want to if they are. There website is no longer available thanks

@mike festiva - what settings did you use to set this cutter up in the Fusion 360 software?

What cut speed and amps do you use for 16 gauge sheet metal. I just got the pro and the Hynade Cut60 and the machine torch.