Thank you for the information. I'm utilizing the new DIY QuinLED boards and Quindore ESP32, particularly when operating the board with high current. They are highly efficient, and I have encountered no issues whatsoever. I have confidence in your advice, yet I am satisfied with my current setup. :)

@BeardedTinker

2 ай бұрын

I was really satisfied with them. They stil work OK - but I have combo of 8266 and 32 boards. Those with 8266 don't work with latest 14.1 FW. And TBH replacing them with these is a bit more expensive than just buying ESP32. But I get functionality that I don't have now (SR). If it works for you, that's the best option you can have ;)

@sevagjb

2 ай бұрын

I completely understand your point. I have tried many boards before, and if you need a setup with more power, the QuinLED is the best choice. For a smaller setup, this board will be sufficient.@@BeardedTinker

@webdev6712

2 ай бұрын

@@sevagjb How is the power related to the controller? You can do as much power as you want into the screw terminal along with the LEDs and use it. I have 25 meters of Ws2812B addressable LED strip connected to such a controller (25 meters is the perimeter of a room with sides of 5x7 meters.

@sevagjb

2 ай бұрын

Of course, you can run the power separately, but having one board for both is more efficient.@@webdev6712

Great video, Ordered two of them with 15 meter LED strip. There support trough Telegram is also great.. Thanks BT. 🙂

@BeardedTinker

2 ай бұрын

Thank you!!! I really hope they will work great for you!!!

I'm in love with diy wemos-d1 or esp32 so I don't think I'll buy one but the project is interesting and the price is really competitive. the opportunity to power it up to 24v is a great plus!

@BeardedTinker

2 ай бұрын

It's really well thought out product. But I always say, if your current setup works, it's best one you could have!!!

SLZB-06M user here! ❤

@BeardedTinker

2 ай бұрын

Next week it's video on 06 non-PoE, 06 PoE, 06M, 06P7 and 07 ... Are you using it with ZHA or something else? How happy are you with it?

@iddiek

2 ай бұрын

@@BeardedTinker bought only for use it w/ zha in ZigBee to eth. Really It's in test atm only 2 devices connected from Ikea (air pm2 sensor) and mijia (ac socket). Plan is replace 3 mijia gateway (1 in every floor atm) and extend compatibility brand but how will it work with +35 slave connected?

@iddiek

2 ай бұрын

@@BeardedTinker at the moment I'm just testing it, with zha, with 2 devices of different brands: a Xiaomi smart plug and an Ikea pm2 sensor. it works and has great range (using it in ZigBee to lan mode). I like that it is opto-isolated between USB and LAN so I can power it from USB where I don't have poe. I will then see if it will allow me to connect all the devices I currently use, around fifty, eliminating the 3 current Xiaomi gateways

@iddiek

2 ай бұрын

@@BeardedTinker at the moment I'm just testing it, with zha, with 2 devices of different brands: a Xiaomi smart plug and an Ikea pm2 sensor. it works and has great range (using it in ZigBee to lan mode). I like that it is opto-isolated between USB and LAN so I can power it from USB where I don't have poe. I will then see if it will allow me to connect all the devices I currently use, around fifty, eliminating the 3 current Xiaomi gateways

@BeardedTinker

2 ай бұрын

@@iddiek hope it works out!!!!

1 on order. Thanks.

@BeardedTinker

2 ай бұрын

Enjoy! Really nice device. I'll be getting 4-5 more of them.

What is the maximum number of pixels on a single output?

@BeardedTinker

Ай бұрын

Not easy answer as it depends on multiple factors, but limit for controlling LEDs is really high. You'll have to worry about power before you hit that limit. And you can go around power issue with power injection in the LED strip. There is a documentation page you can check for this.

@klubsportowyharem2355

Ай бұрын

@@BeardedTinker I currently have an installation with WS2812B LEDs, 60 LEDs per meter, with a total length of 1614 pixels, but my current SP108E controller has poor lighting effects. Hence, my question is whether this controller can handle such a large number of pixels in a single strip.

@BeardedTinker

Ай бұрын

No idea what SOC is SP108E using. Check with SMLight team - I haven't tested more than 300.

@klubsportowyharem2355

Ай бұрын

@@BeardedTinker We didn't understand haha. I provided what controller I currently have and I want to replace it with A1-SLWF-03. Hence, the question is whether it will support my installation where there are 1614 pixels in one line.

It is something similar to Gledopto WLED controller, but cheaper...

@BeardedTinker

2 ай бұрын

Very similar, But I don't think Gledopto has mic, IR receiver and button for custom function... I may be wrong and they could have newer version with this, but I haven't seen it.

@BeardedTinker

2 ай бұрын

May bad... I've seen one with mic just now... Didn't know they had hat one!

@webdev6712

2 ай бұрын

@@BeardedTinker@BeardedTinker size, price, absence of Type-C connector in Gledopto, which is, you should agree, very convenient - just plug and place without any wires and connectors. This one is an extremely tiny one, and what is surprises me here - an extremely sensitive microphone.

will it work with any RGB LED strips?

@BeardedTinker

10 күн бұрын

With digital one, yes. Both 3 and 4 pin version. But they need to be addressable.

How do I turn off the Mic?