English by 3ATIVE
Тәжірибелік нұсқаулар және стиль
In this tutorial, we'll show you how to turn your WS2812 LED Matrix panel into a personalized message board using WLED and Home Assistant. With just a few clicks, you'll be able to send custom text, sensor data, and even automate the process.
💖 I hope you like this Home Assistant setup guide for your smart home 💖
🎬 THE LINKS - Files / Help / Support:
- 🛒 Other files & Merch: store.3ative.com
- 💎 3ATIVE DISCORD: / discord
- ☕ Buy me a Coffee: www.buymeacoffee.com/3ative
- 💕 PATREON: / 3ative
- 💯 Get the Gadgets, Devices and Tools I use: Amazon UK: amzn.to/3uRw8fi
* As an Amazon Associate I earn from qualifying purchases. Using this link ⇈ provides small monetary support for my channel at no extra cost to you.💖
Chapters:
00:00 Intro
00:21 1-Build the Hardware
00:40 2-Flash WLED
01:49 3-Setup WLED
06:48 4-Adding the Home Assistant
09:08 5-Sending Text to WLED
13:27 6-Text Box and Automation
16:52 7-Displaying Other Data
18:25 Outro & Bloopers
#homeassistant #tutorial #ledmatrix
~-~~-~~~-~~-~
Check out: "IKEA Air Quality Sensor: 7-in-1 ESPHome Update Hack"
• Hack the IKEA Air Qual...
~-~~-~~~-~~-~
Пікірлер: 201
"LOOK at the STATE of that BOX!" 🤣
@andrewelliott7830
Жыл бұрын
rofl nice
This is the way to do tutorials, well done sir! The speed is just perfect, your content is precise (without nonsense) and everything is explained in detail and in an understandable manner!
@3ATIVE
5 ай бұрын
🙏Thank you for the positive feedback! I make the kind of tuts I'd want to watch. Just clear, concise instructions... without any fluff. 😊
Again, fantastic video. The bonus tip of using the arrow keys is something I never knew.
@3ATIVE
Жыл бұрын
👍Glad you liked it Hans. I do try and add those li'tips in where I can.
THANK YOU! I've been messing about with this for a few months -- probably longer. I had tried flashing various ESPHome projects and they just weren't updating correctly. I already use WLED, but your video alerted me to WLED supporting matrices natively, and you already did all my YAML!
@3ATIVE
Жыл бұрын
You are most welcome! - Glad it helped you.
Great video, your explanation of the gnarly, curly, bracey, world of yaml is clearing my scrambled brain….
@3ATIVE
Жыл бұрын
Thanks Tony. Yeah, that syntax and brackets in coding scrambles me too sometimes. 🤣
OK, just found this as I was searching for how to change the text on a WLED matrix I been playing with, hey it's sure to be simple, and now you have gave me so many other ideas. Thx
@3ATIVE
8 ай бұрын
Thnx fella, glad you found it use/helpful.
Thanks a lot for your precision and exhaustivity. It works!
@3ATIVE
6 ай бұрын
Thank you Roman. I am happy it was useful / helpful for you.
Impressive work !!!! can' t imagine more complex speech to text application with your "Matrix"
@3ATIVE
Жыл бұрын
Well, Alexa notifications (and others) coming soon 😉
Great video, thanks for sharing. Learned quite a bit. But will I remember!
@3ATIVE
Жыл бұрын
Thank you, you are most welcome. Glad you found it useful. It'll always be here, if you need a recap! 😉
You solved several problems that I had to solve for 2 months, many thanks. Keep on!
@3ATIVE
7 ай бұрын
Glad it helped!
exactly what i looking for!! thank you!!
@3ATIVE
9 ай бұрын
That's great to hear - Happy to be of service. - #StayTuned, there's a 2nd part, using multiple Matrix Panels, coming next week.
Wow this is a great video! Thank you for the inspiration
@3ATIVE
Жыл бұрын
Glad you liked it. Have fun. 👍
THANK YOU!! this is exactly what I'm sure many of us want to do, but would have a really hard time figuring out. I'm going to implement tonight to show timeleft of my 3D print.
@3ATIVE
Жыл бұрын
My pleasure. Nice use-case, have fun. 🥳
@GoranMilici
Жыл бұрын
that is exactly what I;m thinking bout doing on my Voron but not sure how to call to to get the time left from klipper. Can you share how you get the time left for the print from klipper to your wled? I'm using an esp32 the Adafruit Huzzan for my wled on the voron
I'm always fascinated, for me best yt channel ever. So Nice thank you.
@3ATIVE
Жыл бұрын
Thank you Norbert, it's so great to hear.😎
What a great video again, thanks for sharing this info.
@3ATIVE
3 ай бұрын
*My pleasure.* _Thank you for the kind words_ . 🙏
love the bloopers at the end. thanks!
@3ATIVE
Жыл бұрын
Thank you, I'm glad you like them!
Thank's a lot ! It's working fine !
@3ATIVE
Жыл бұрын
That's great, enjoy.
WOW! That was so cool man Thanks!
@3ATIVE
Жыл бұрын
Glad you liked it! What plans do you have for yours?
@Joseph-ko2kl
Жыл бұрын
@@3ATIVE Would like to make one, frame it up and put it in the Home office so I can let everyone know (Family) when I am in a phone call, etc.
@3ATIVE
Жыл бұрын
@@Joseph-ko2kl Cool.... I have one outside mine for when I'm Recording.
Amazing work
@3ATIVE
Жыл бұрын
Thank you sire 😊 I hope it earns a sub 😉
wonderful idea to change the text in the matrix
@3ATIVE
Жыл бұрын
Thanks. I thought it would be a useful thing to add. So now it's possible to have Scripts and Automation(s) update the Matrix text - ideal for messages and announcements.
@sevagjb
Жыл бұрын
@@3ATIVE look forward to see more creative videos about that 👌
Brilliant. Thank you
@3ATIVE
Жыл бұрын
You're very welcome!
thank you very useful cheers from Italy
@3ATIVE
Жыл бұрын
You are welcome, glad you find it helpful. 👍
Just stumbled over your channel today. Great video, but a bit fast for me as a noob, think I'll go explore your other videos, I like your style and thoroughness.
@3ATIVE
Жыл бұрын
Welcome. Thank you for the kind words of encouragement, I really appreciate the feedback. Yes, I do tend to speak fast, I try and get as much in as possible without taking ages doing it. LOL
very, very useful!!!
@3ATIVE
Жыл бұрын
Thank you. I'm glad you like it.
Another good vid......it'll be my next project 😀
@3ATIVE
Жыл бұрын
Thanks Del. Have fun. 💖
Jesus Christ .... Awesome for a newbie.😊 Came here, watches and instantly hit the subscribe button. Thank you for your content
@3ATIVE
Жыл бұрын
WOW, so glad you liked it. Thank you for the support. 🥳
Many thanks for a great video! Got my setup working nicely! Main thing for me was how to set up the RESTful command and the automation - many thanks indeed! - Justin
@3ATIVE
Ай бұрын
Thank you for the feedback Justin. It's lovely to hear back from peeps when my tutorials have helped - It's why I create them. 💖
Perfect❤
Great video! Time to buy more ESP32s. 😁
@3ATIVE
Жыл бұрын
You mean you don't have a bunch of ESP32s just lying around waiting for my projects! LMAO
Hello, unfortunately my English is not that good, but I understood everything that was explained and I was now able to implement it in my home in Germany. Thank you very much for the great and very easy to understand video!
@3ATIVE
2 ай бұрын
Danke für dein tolles Lob! 🙏 Es freut mich total zu hören, dass mein Tutorial für dich einfach zu verstehen war und dass du die Ergebnisse erfolgreich nachvollziehen konntest.
yessss thank you so much! I've been at this for almost a month (i'm using text scroll in an artwork) and this video solved all the problems I was running into! I'm new to using the WLED server - has anybody tried transferring the server over to another wifi network if they've taken their matrix someplace?
@3ATIVE
5 ай бұрын
You're very welcome! As for transporting WLED: I [think] if you fire it up and it does see it's saved Wi-Fi it'll default to an Access Point (AP) mode. From there you can input the new SSID & Password using the WLED Phone App.
Thanks!
@3ATIVE
Ай бұрын
WOW, Sooo Kind. Very Much Appreciated. 🙏
Great. Great!
@3ATIVE
Жыл бұрын
Thank you. It was fun to play with. Also, check my next one - Sound Activation for WLED: kzread.info/dash/bejne/e2lkxNKmecrAl8o.html
@mikegodin23
Жыл бұрын
@@3ATIVE I will. Thanks.
perfecttttttttttttttttttttttt you r the bestttttttttttttttttttttttttttttttttttttttt
Great tutorial!!! Question... how to you call out different segments and/or presets?
@3ATIVE
6 ай бұрын
Thank you. A: You can really call individual Segments or Presets, as Presets are made of Segments. What you can do is format the rest_command "Data" that includes everything within a preset. Then send that to WLED. You can get this (JSON Formatted) data by looking inside one of your saved WLED presets.
You really amused yourself with "..That Box!" LMFAO
@3ATIVE
Жыл бұрын
The 'Blooper' does even come close to what I was like at the time. I stopped recording but was almost in tears! LMAO
Are you using the additional DC V input? Or do you power the matrix via the ESP32 5V using the 3 wire JST? Thank you
@3ATIVE
Жыл бұрын
No additional PSU. The Matrix is powered from the 5v Pin on the ESP Module, which in turn is powered by a 2A USB Phone charger.
Saved me lots of time thanks Wondering How would you set the text colour based on state ?
@3ATIVE
3 ай бұрын
Cool, Glad it helped. 👍 You can add ( "col": [ [R, G, B] ] ) within the REST commands' "payload". E.G.: payload: '{ "seg": [{ "col": [ [0, 0, 255] ], "n": "{{text}}" }] }'
@yorks_atheist3069
3 ай бұрын
@@3ATIVE Thanks have it on the wall displaying house power usage, want it to be green when have excess solar and red when importing from grid.
@3ATIVE
3 ай бұрын
@@yorks_atheist3069 Oh, nice application. 👍 Please come join my DISCORD server and share some photos of your project. It's also a great place for hanging out and tech support.
you can also add custom text to the beginning and end of the states command. like this. service: rest_command.wled_text data: text: "Out door Temp {{ states(\"sensor.station_temperature\") | round(0) }}°F"
@3ATIVE
Жыл бұрын
Indeed. Any template that generates characters can be sent. Also, if you spell 'Outdoor' correctly you can save space. LOL
@homeauto9099
Жыл бұрын
@@3ATIVE Cheeky :)
This is great. Thanks a lot! Never thought, that I'm able to understand all these things around rest api and changing text. You've made my day. I've got one additional question. How can I mix a fixed text and sensor data in one automation? My goal is to display something like Pooltemp: 29,3 C In this case, Pooltemp: and the C is the text and the 29,3 is the value from my self made pooltempsensor.
@3ATIVE
11 ай бұрын
Great to hear! 👍 In your example, your automation action would be: action: - service: rest_command.wled_text data: text: "Pooltemp: " + "{{states['YOUR-TEMP-SENSOR'].state}}" + " C"
@user-qm3bs1hu3p
11 ай бұрын
@@3ATIVE Again, thanks a lot. Will give it a try later today 🙂
@3ATIVE
11 ай бұрын
@user-qm3bs1hu3p My pleasure. Lemme know if it works the way you wanted, or if you need anything else.
Awesome video, helped me alot . is there anyway to just display the time like 21:08 ? I can only get te standard version when u dont have a preset (Yup i am a noob :p )
@3ATIVE
Жыл бұрын
Thank you, glad you liked it. Sure, anything you can send to the panel it will display. For the Time, you can simply make an automation, triggered every minute, to send to the panel.
ohhhhhh, so glad I'm stumbling upon this! I'm planning a jukebox build...Can you think of a way to pull song/artist text from Spotify to update wled?!?!?
@3ATIVE
4 ай бұрын
I'm so glad you found me, after all this time, Where have you been! LOL Sorry, I don't know much about Spotify, I don't use it myself... However, I'm sure there's a Home Assistant integration that'll get the info you need. From there, it should be a simple case of making a automation to "POST" that to the display, in the way I show here.
@RandysRandomHobbies
4 ай бұрын
I'll keep you POSTed if I figure it out! Thanks again for this awesome tut!@@3ATIVE
@3ATIVE
4 ай бұрын
@@RandysRandomHobbies Yes, please do. I'd love to hear all about it. Also, feel free to join my DISCORD server to post pic, code, etc or get get more support. discord.com/invite/3RbZgvHeJ9
@3ATIVE
4 ай бұрын
@@RandysRandomHobbies Oh, I just got the "POSTed" LOL
Fantastic instruction! Any ideas on how to display static text for a sign in WLED?
@3ATIVE
Жыл бұрын
Any text (on one line) won't scroll if it's less than or equal to the number of characters that fit the width - Normal size letters that's 5.
@iainparsons9788
Жыл бұрын
@@3ATIVE Brilliant! Thank you sir, you do great work!
A bit of a tangled web for this neophyte but you detail it well. What happens if you remove power from the setup? Will it remember the last scrolling message and just continue when power is restored? (Like if you had it on a timer, or an alexa plug, and it would come on for a few hours every day)
@3ATIVE
11 ай бұрын
Yes it will, as the "segment name" (which is where the text goes) is saved within WLED. However, for WLED to return to that on power-up, you need to set that in config > LED preferences, then scroll down to "Apply preset [xx] at boot".
@am1manTravel
11 ай бұрын
@@3ATIVE Thank you!
Hi, great video, the only thing I was able to use to get up and running. Really appreciate it! I have a question and I really hope you can help. I have 2 8x32 and I’ve set them up stacked and it’s running as a 16x32. Now I can create segments and have the top do whatever and the bottom, for example, show the time. In home assistant, how do I direct it to send the info to either ID 1 or ID 2 (segment 1 or 2). So I can have text alerts sent to the top and have the static time on the bottom. Sorry if I don’t make total sense, hope you understand though what I’m getting at. At 12:20 you sorta say other segments.
@3ATIVE
9 ай бұрын
Thanks for the feedback. No that makes perfect sense... It'll be the one of the topics I cover in my next tutorial - Which I'm working at atm. TLDR for a YT comment, I hope you can wait. 🙏
@stephanel273
9 ай бұрын
Absolutely, don’t mind waiting at all. Truly appreciate your reply and videos. The slow simple explanation, the text at the bottom so we can pause and copy it. (Well I do that anyhow lol) But seriously, it’s all very helpful! Thanks!
@3ATIVE
9 ай бұрын
@@stephanel273 Cool. I try and make tutorials in a manner I'd like to watch them. So, it's comments like yours that make it all worth-while. 😍
Loving this mate! Just wondering how hard much harder will it be to have clock and temperature displayed. And maybe can't then be switched to get when needed?
@3ATIVE
Жыл бұрын
Thank you. I can't see it being too difficult - As I show you can send text, so sending it Time and or Temperature at will is no different. Bear in mind that you only have a 5 character width, anything longer will scroll.
@josesanchez-ot8kp
7 ай бұрын
@@3ATIVE Hello, thank you very much for the tutorial, it is incredible, I have managed to set up my own Wled panel and I can send text to it from home assistant, what I can't do is show the time and temperature from home assistant, how do I have to do it, I'm lost with that ? thank you for your magnificent work
@3ATIVE
7 ай бұрын
@@josesanchez-ot8kp You can send it anything. The key is make a Custom Sensor for the data, then run an automation to send to the RESTFul command.
@josesanchez-ot8kp
7 ай бұрын
@@3ATIVE Hello, thank you, I already got it, I just had to put the "sensor.time" entity as a trigger and into action: service:rest_command.wled_text data: text: "{{states['sensor.time'].state}}" Thanks for the little note you gave me.
@3ATIVE
7 ай бұрын
@@josesanchez-ot8kp Noice 🎁
Fantastic guide. I want to take it a step further with a sensor I created using ChatGPT. I hoped to put the sensor in the automation. It's state is a string. But I just can't get it to work. Any ideas why? service: rest_command.wled_text data: { text: "{{ states('sensor.gptscroll_response').state }}" }
@3ATIVE
5 ай бұрын
Thanks, I'm glad you found it helpful. Try this: text: '{{states[''sensor.gptscroll_response''].state}}'
Great video! How many amps power supply do you need for this?
@3ATIVE
Жыл бұрын
Thank you Justin. While it's recommended to have a 5V 15A PSU, WLED has a user settable (software) limiter for the current. For example: The setup you see in this video I'm using a mobile phone charger (2A) and I've set the limiter to 800mA. - Even that's too bright to go over 10% brightness. 😎
@gnospanker
Жыл бұрын
@@3ATIVE Wow that's great thanks for the explanation
in the rest command can you tell it to use scrolling text effect. I currently have the default on boot to some other effect and when I send updated text it doesnt change back to scrolling text effect. The text gets updated thanks
@3ATIVE
Жыл бұрын
Yes, the scrolling text is effect 122.
What version of WLED are you using to have the 2d configuration options??
@3ATIVE
Жыл бұрын
LOL it's the first thing I showed in the video. Check out the part about installing WLED... The version is shown there.
Really helpfull But is it possible to split the matrix using wled/home assistant to show different things on the same matrix, like the temperature and thermometer logo next to it!
@3ATIVE
9 ай бұрын
Thanks. Sure, each segment can have any number of LEDs in its Width and Height. So, you just make two segments of 8x8, just make sure you set the 2nd to "Start" at 8. Then, in Home Assistant, send your first data to segment 0, and the other to segment 1.
@3ATIVE
9 ай бұрын
Oops, Correction: Each segment should be 16x8, with the 2nd one Starting at 16.
@iMxXxMi
9 ай бұрын
@@3ATIVEThanks very much for the info ❤
What would the syntax for a service node red? I can get {"text": "The Quick Brown Fox "} going but not {"text" :"{{states['sensor.entryway_thermostat_current_temperature'].state}}"} to pull the state of an entity? Works perfectly in the developer tools
@3ATIVE
Жыл бұрын
Hi James, Without seeing your entire node - Try this: {{states.sensor.entryway_thermostat_current_temperature.state}}
Great video as always! :) What power supply did you use for this matrix?
@3ATIVE
Жыл бұрын
Thank you István 👍 For the video/tutorial I was just running off the PC USB port. However, main usage, just a USB Phone charger - My one is just a 2A.
@istvantanczos5294
Жыл бұрын
@@3ATIVE I was thinking about the power supply for the LEDs. When setting up the WLED, he recommends a 15A power supply for the 256 LEDs.
@3ATIVE
Жыл бұрын
@@istvantanczos5294 That may be true for strings outside. I run my matrix panel limited to 800mA and as you saw very low brightness on the sliders. - And it's still too bright! LOL
@huczas
Жыл бұрын
@@3ATIVE how you limit to 800mA? it's somewhere in setting?
@3ATIVE
Жыл бұрын
@@huczas Config>LED Preferences - Near the top you'll find "Maximum Current"
Good video friend and very interesting. Friend, I can translate it into Spanish and share it with my friends and followers. Thank you for your attention. Greetings from Colombia, Latin America.
@3ATIVE
11 ай бұрын
Thank you, @donpera3654! I appreciate your support. Sorry, I can't allow that, it would take away from my views. However, give me a day or two and I'll translate the video for you.
@donpera3654
11 ай бұрын
@@3ATIVE Of course. What happens is that the tutorials now become more interesting with audio or subtitles in the largest KZread community than the Hispanic community, then the Portuguese one follows, Brazil, then English, but the largest audience is Hispanic, friend, thanks.
fantastic Do you know if a the panel can be turned portrait and have the text go up or down instead of side to side
@3ATIVE
Жыл бұрын
With other software yes... Sadly, WLED only scrolls Right to Left.
@garysteo3398
Жыл бұрын
That’s what I figured. But I thought if there was a way you would know. Look forward to your next video
@3ATIVE
Жыл бұрын
@@garysteo3398 I know there are some fonts that have their characters rotated 90 degrees - Maybe that cold work. ... Not sure to change the font thou... Soz
@3ATIVE
Жыл бұрын
@@garysteo3398 Cancel that, I found one... It doesn't work. :(
Sorry for the noob question, but is there a way to push the new state further text of the sensor just once or twice ? Because in my case the state if unchanged is now constantly rolling on the matrix.
@3ATIVE
Жыл бұрын
Sorry but, I don't understand what "new state further text" is. However, if you're asking if the text can be updated when the state of an entity changes then yes... Just make an automation to update the matrix when the entity state changes.
@MrMacjex
Жыл бұрын
@@3ATIVE Apologies for my bad expression and thank you for the fast reply -> Can you stop the scrooling text after its published its payload/message?
@stovedoctor
Жыл бұрын
@@MrMacjex after the first action for the template you could do a action wait for one minute then a action stop or a action turn off device.
Nice work, not sure if its obvious or not, but how do i add more devices (matrix) to use this? i.e when you added the rest_command: in config yaml its only using the one device ip.
@3ATIVE
6 ай бұрын
Unless you do some fancy coding, the easiest way is to add one REST Command per display.
@bryantubb5680
6 ай бұрын
Hi thanks for replying. So something like this in the config, rest_command: wled_right_matrix: url: 192.168.0.10/json/state method: POST payload: “ “ wled_left_matrix: url: 192.168.0.11/json/state method: POST payload: “ “
@3ATIVE
6 ай бұрын
@@bryantubb5680 Almost, it will have to be a "List". So each one will need a "-" at the beginning: rest_command: - wled_right_matrix: url: 192.168.0.10/json/state method: POST payload: “ “ - wled_left_matrix: url: 192.168.0.11/json/state method: POST payload: “ “
What would be the syntax for the payload section of the rest command when sending text to wled with multiple segments?
@3ATIVE
25 күн бұрын
payload: '{ "seg": [{ "id": 0, "n": "{{text1}}" }, { "id": 1, "n": "{{text2}}" }] }' Note the use of "id: 0" and "id: 1" - Zero is your first segment. I hope that helps.
@MarkPaterson71
24 күн бұрын
@@3ATIVE Thank you sir, yes it does!!
@3ATIVE
24 күн бұрын
@@MarkPaterson71 Cool. Glad I could help and I hope you find another Texan soon 😉
Can this be applied for 16x16 led pixel panel?
@3ATIVE
Жыл бұрын
Sure. But, be aware that at only 16 LEDs wide, you will only get about 2 characters.
There are lots of matrixes out there. How does one determine the parameters, ie. whether it's vertical or horizontal, serpentine or zig-zg, etc? Thanks for the video.
@3ATIVE
Жыл бұрын
Mainly trial and error. If it helps, I've added the one I used in my Amazon Shop - There's a link in the video description.
@joepriority
Жыл бұрын
@@3ATIVE Thanks much
@joepriority
Жыл бұрын
@@3ATIVE Just by watching your outstanding video again the answer came to me. Here's what ya do. Start by setting Settings > LED Prefernces > Length to one, which will tell you where first pixel is. As you progressively increase the Length setting it will light up more leds and the path that it takes will reveal whether it's horizontal or vertical, and whether it's zig-zag or serpentine.
@3ATIVE
Жыл бұрын
@@joepriority A great way to test.... I just futz around until it worked! 🤣🤣🤣🤣
Hi, Would you please kindly show us how to program the text with 3-4 different color line effect? Also, I would like to make the whole matrix with 4-5 different color lines like the 3 colors flag?
@3ATIVE
Жыл бұрын
Sorry, I'm not sure what you mean by: "3-4 different color line effect" However, if you use 3-4 panels (all 32x8) then you can assign different colours to each row of text. I do have a tutorial (coming soon) on how to connect more than one 32x8 panel to WLED. So, #StayTuned for that! 😎
@lanphanh
Жыл бұрын
@@3ATIVE I meant, with 8 horizon lines, I want to make 4 different colors, like 1 color for every 2 lines. Or we can make the American flag with red white blue. Thanks!
Great tutorial unfortunately I'm trying this with same pixels etc. in a tree format yeah doesn't look anything like this haha.
@3ATIVE
7 ай бұрын
Scrolling text in a tree - That's gonna be fun to line-up. I hope you're able setup something that works. Happy Holidays. 🥳
How to increase speed text ? It's very slowly..now. And Russian language strings ( Cyrillic)
@3ATIVE
3 ай бұрын
As part of the "Scrolling Text" Effect, there is a "Speed" control - So you are limited to its Maximum. As for Cyrillic font / characters that's down to the languages programming in to WLED. Nothing we can do about that - I mean it can't even display some English characters LOL
Should this still work or is it just me doing it wrong? Even changing the name in WLED doesnt scroll
@3ATIVE
4 ай бұрын
Yep it's still working. FYI - Text of 5 characters or less won't scroll. - Maybe that's what you're seeing??
@tezgray
4 ай бұрын
yep, that's the vital bit and the REST was my fault, how many time I've checked i'd got it right.. but as just transposing 2 chars made all the difference.. many thanks yet again :)
@3ATIVE
4 ай бұрын
@@tezgray Ah yes coding... She's a fickle Bit*h. LOL
@tezgray
4 ай бұрын
@@3ATIVE Oh don't I know it ... and what do i do for a living ?.... yep that's right 🤣🤣🤣
I watched full video 😅 i know i can't do it though 😅😅😅
@3ATIVE
8 ай бұрын
Now don't say no, you've got the know-how, just give it go!
@bishalscreation
8 ай бұрын
@3ATIVE thank you 😊 🙏 💓
Whats happening when put the brightnes to the max :P
@3ATIVE
Жыл бұрын
WLED sends data to the LEDs to make them brighter.
@dreaderlock
Жыл бұрын
@@3ATIVE just kidding,but somehow it is effecting the other effects.
I can get text but just cannot get a sensor service: rest_command.wled_text data:{ text:"{{states['sensor.office_outside_temp_2'].state}}" }
@3ATIVE
6 ай бұрын
Check that sensor name. Otherwise what do you get on the display when you run that command?
@grampslanc8394
6 ай бұрын
finally service: rest_command.wled_text data: text: Outside Temp {{ states("sensor.office_outside_temp_2") | round(1) }} F
@3ATIVE
6 ай бұрын
@@grampslanc8394 You can have all that on the LED Matrix, it'll only display a max of 32 characters and only on a single line.
@grampslanc8394
6 ай бұрын
I needed () and not [] around the sensor@@3ATIVE
@grampslanc8394
6 ай бұрын
two sensors 🙂 Thanks for the vid. text: Out:{{ states("sensor.office_outside_temp_2") | round(1) }} F In:{{ states("sensor.big_room_temperature") | round(1) }}@@3ATIVE
How up speed scrolling text? Else x2
@3ATIVE
3 ай бұрын
We are limited by the Slider, in WLED, and it's code.
Arduino code?
@3ATIVE
9 ай бұрын
I'm good, thnx
Letters all messed up y?
@3ATIVE
15 күн бұрын
Errm... I just watched the video again and everything looks fine to me.
I just learned I don’t know a damn thing about home assistant.. 😩
@3ATIVE
Жыл бұрын
_HeHeHe_ ... Don't worry, none of us did when we started. 😉
Very bad , when light off and on all led glow.go datta !
@3ATIVE
Жыл бұрын
I'm sorry but.. What????
Slow the hell down, we can't hardly see what your doing.
@3ATIVE
Жыл бұрын
You do know this is a recording, right?
@homeauto9099
Жыл бұрын
HaHaHa... Stating "can't hardly see", which is a double negative, means you CAN see. LMAO
@3ATIVE
Жыл бұрын
@@homeauto9099 Calm down fella 🤣 - I guess he meant either: -- We can't see what... or -- We can hardly see what... I think it's an "American-isum", they also say: E.G. "Let's see if I can't work this out", meaning they are trying to NOT work something out. LMAO
@homeauto9099
Жыл бұрын
@@3ATIVE PMSL Yeah, let me do my best NOT to do this.
@3ATIVE
Жыл бұрын
@@homeauto9099 We LOVE our U.S. cousins 💖
Hello! @3ATIVE VFX Studio Can it show youtube channel Subscribers in real time?
@3ATIVE
Жыл бұрын
Yes, in Home Assistant you'd just need to connect to the KZread API and make a Text Sensor to push the value to the Matrix.