Tim's Stereo Systems Kickstand Bypass (Brake Hold in Neutral)
Автокөліктер мен көлік құралдары
This product was sent to me for testing purposes by Tim from Tim's Stereo Systems maker of the under seat Wireless CarPlay adapter.
The product being shown in this video essentially a bypass for the kickstand sensor allowing you to have the ability to apply the brake hold feature while in neutral and with the kickstand down or up which the Harley-Davidson part does not allow.
NOTE: YOU WILL NEED TO HAVE YOUR BIKE FLASHED BY YOUR DEALERSHIP IN ORDER TO HAVE THIS WORK. THEY WILL HAVE TO BYPASS THE KICKSTAND SENSOR WHEN PROGRAMMING. LABOR SHOULD ONLY BE CHARGED AT 1/2 HOUR.
This product at time of posting is available for $60 + $10 shipping. If your interested in this or any of this other offerings I will provide his contact info below:
(608) 718-1425
timsstereo@gmail.com
/ timsstereosystems
---
Special thanks for supporting the built to:
@khromewerks
@condorsecure
@psrusa
@rickrakusa
@tcmtmotoofficial
@kendonindustries
@cardosystems
---
#HarleyDavidson #RoadGlide #FLTRX #2024RoadGlide #BlueBurst #117 #Milwaukee8 #HarleyDavidsonMotorcycles #RoadGlideNation #HOG #RoadGlideOwnersGroup #HarleyLife #rideon #freedommachine #twowheellife #cardofam #khromewerks #condor #baggernation #baggerlife #kingofthebaggers #roadglideaddicts #properbaggers #onlybaggers #roadglideaddicts #harleydavidsonnation #harleydavidsondaily #harleydavidsondaily #roadglidenation
---
📷 iPhone 15 Pro Max
Пікірлер: 8
Are you having any issues with the hold releasing? After I did the PSR levers it is not wanting to disingage. ( I just discovered this and haven’t reached out to PSR fyi)
@hdryderct
25 күн бұрын
The only issues I had with the levers initially was that when they were st the lowest setting on the Journey levers I could not enable the brake hold feature. So brake hold not easily releasing wouldn’t be an issue because of the levers. It was difficult to disengage with the stock levers for me as well. Does there make sense?
Not sure to understand the interest to do that ?
@npierami
26 күн бұрын
It's so you can have your brakes hold you when you are stopped on a hill, but in neutral. I've actually wanted that quite a bit.
@Locle-xm9nd
26 күн бұрын
And what does it cost for this bypass?
@hdryderct
26 күн бұрын
That’s I am not sure. It was a test unit sent to me so any of those questions you’d have to email, call or message Tim.
@hdryderct
26 күн бұрын
It’s great to have especially if you’re stuck in traffic in an incline / decline. You don’t have to sit their and hold your clutch in because currently on the 2024’s (non-CVO) if you don’t wanna hold the clutch in you have to be in Neutral and you’ll be holding that brake. With this you don’t have to hold either.
@hdryderct
26 күн бұрын
@@Locle-xm9ndcost is $60 + $10 shipping. Dealer will more than likely charge 1/2 hour labor to flash the bike for it to work.