Tillotson 212 CVT Install

Автокөліктер мен көлік құралдары

Shot in 4K ULTRA HD
This video shows how we got our CVT to properly align with our Tillotson 212 engine swap. If you have any more questions about the swap I will try to answer them in the comments.
Trail Master MB200-2 Mods:
- Tillotson 212 Electric Start Engine Swap
- 60T Sprocket
- D.I.D 420NZ3 Motocross Chain / 132 link size
- Comet CVT
- Go-Powersports rear shocks
Front Tire - amzn.to/3t5754p
Rear Tire - amzn.to/38kIsbL
Chain - amzn.to/3qmonYU
Rear Sprocket - amzn.to/3kV443H
Tillotson 212 Engine - amzn.to/30pbz9y

Пікірлер: 17

  • @stinkybritches4540
    @stinkybritches45403 жыл бұрын

    Love the Tillotson and Comet I threw on my bike. I’ve been bustin’ them belts too.

  • @CampbellBrothersGarage

    @CampbellBrothersGarage

    3 жыл бұрын

    One day whenever I can find a manual clutch for it, that is the route I want to go. 3D-Motorsport is the only one I know about but every time I check the site they are sold out.

  • @fatbuddycat
    @fatbuddycat3 жыл бұрын

    I didn't trust that 1/4 inch thing so I went with an adjustable plate and a 30 series. The 223 will be back on this weekend, built a little bit and angry as heck! The 60t makes a big difference, if you pulled the governor get a super 30 series on there with the 60t and you'll love it!

  • @CampbellBrothersGarage

    @CampbellBrothersGarage

    3 жыл бұрын

    Thanks for the tip! Been collecting parts to build up the Tillotson. Have prolly 3 boxes full now including the new rod, heads, cam and a Mikuni flat slide carb. After we put a few more hours on the stock Tillotson we plan on building it in the spring.

  • @fatbuddycat

    @fatbuddycat

    3 жыл бұрын

    @@CampbellBrothersGarage yeah buddy! I love these bikes, super awesome to work on. The Pro-Taper bars I added made a big difference to as far as overall feel. Love the content guys!

  • @fatbuddycat

    @fatbuddycat

    2 жыл бұрын

    @Knight Recon If you add an adjustable billet plate you can scoot the motor over to line up so that the driver gets more contact with the shaft.

  • @lsj624

    @lsj624

    2 жыл бұрын

    @Knight Recon Hey I put a Predator 212 on my mb200-2 and same short shaft. I shifted the engine over 1/2" or so and now works great using stock convertor. I just made a couple videos on it. Check my channel.

  • @Bobafetblue

    @Bobafetblue

    10 ай бұрын

    @@lsj624 Hey I was exited to see your fix, but the video's aren't there no more

  • @Ultimatrix117
    @Ultimatrix1173 жыл бұрын

    I still don't quite understand how you got the CVT on because the Tilly I ordered for my mb200 the shaft is so short.! I have no idea why the output shaft is so short compared to the crappy stock engine it came with. All I'm trying to do is a simple 212 swap which also has the electric start. Please send advice!

  • @lsj624

    @lsj624

    2 жыл бұрын

    Dont know if you got your issue resolved but I made a vid on how to deal with the short shaft issue of the Tilly and predator 212. Hope it helps. Just click my icon to go to my channel.

  • @Ultimatrix117

    @Ultimatrix117

    2 жыл бұрын

    @@lsj624 I actually did solve the problem. But I'll still watch your vid:)

Келесі