Tig Welding Job and Welder's Third hand Overkill
Тәжірибелік нұсқаулар және стиль
check out our forum here forum.weldingtipsandtricks.com...
and visit our store here
weldmongerstore.com/
www.weldingtipsandtricks.com/t...
A DIY tool that no shop should do without is called a Third Hand or a Welders Finger.
All it takes is a few pieces of round stock in about 1/4" or 3/16" ( around 5 or 6mm) and a some type of block of metal for added weight. A hunk of 1 inch round stock, a piece of thick plate, whatever it takes. You cant screw one up. Just like a 3 legged stool, with 3 points, they always touch.
Пікірлер: 53
Thanks for all of these awesome videos; they've helped tremendously in my work. I TIG weld for a Bosch owned company now :)
For this video I was using a miller dynasty 200dx. The diversion 180 is an ok welder. The tig torch is hard wired so stick welding can only be done by modifying things. But for the money, it can handle a lot of tig welding jobs especially if you use a helium argon mix for aluminum.
I thought I remembered doing it before but I guess I am growing into one of those old guys who tells the same story over and over. Now.....What were we talking about again?
Hey Jody do you horizontally dab or poke or sweep the filler rod into the puddle. Just curious on what motion works for you. I like lay wire but occasionally " poke" the rod in the front edge. Thanks
This was another killer video! Thankyou man!
Nice dad joke
As a gunsmith thank you for this.
Good stuff man keep up the good work.
Any concern at all with TIG welding silicon bronze? I did quite a bit of MIG with silicon bronze wire about 15 years ago, and fumes were a bit of a concern.
Excellent videos,it does look like a birds head .Thank you for the good videos. I will definitely build me a third hand!
which miller tig welder were you using in this video ? And what do you think of the Diversion 180 ?
Tig welding silicon bronze makes for way less fumes than mig. Still, it pays to have a fume extractor for stuff like this. My fume extractor is on loan to a nearby business friend who was welding some really nasty stuff... but I will have it back soon.
Good ideas! Love the butt joke!
Would a copper lug or a mig tip work at the contact point?
That is the head of a condor. Man you got it perfect. .
Kaw, kaw, kaw!!! Looks like a turkey vulture to me :)
That joke was awesome. Reminds me of when my first foreman taught me how to make an orange peel man.
you should do a video on how to make a third hand tool...just to get some good ideas on how to make one...in need of a third hand thanks
do they have to be out of aluminum or doesnt it matter with the silicilon bronze
At the end of the Video LAUGH OUT LOUD!!!
Great vid thanks!
the ending was hilarious!!
Ugly 3rd hands need love too. I like your ugly 3rd hand. It looks handy. The one I built is ugly. One leg moved when I tacked it. Covered in rust. But it works! I plan on making some uglier ones.
I enjoyed that
What is the difference between ER 70s2 and ER 70s6 and when would you use one rather than the other.
@lukefaceman
8 жыл бұрын
ER70S2- compositon by %: C -0.07, Mn -0.90 t0 1.40, Si -0.40 to 0.70, Ti- 0.05 to 0.15, Zr o.o2 to o.12, Al 0.05 to 0.15 ER70S6- compositon by %: C-0.07 t0 0.15, Mn- 1.40 to 1.85, Si- o.8o to 1.15, 0% of Ti,Zr, and Al. So basically 70s-6 has more deoxidizers than 70s-2. meaning it is better on "dirtier" metal.
@lucasholt3482
7 жыл бұрын
practically speaking, er70s-6 works better for full penetrating welds, where as er70s-2 will work a bit better for a weld where backside deoxidation isn't as critical, in my experience.
Thx!
Practical welding is way more of an art form than any one particular craft perfected by certain "artist"
Hehe, good one, thank god I kept watching or I would have gone checking ball bearings!
You the man
It does not really look like a bird, it looks more like Mick Jagger standing on stage with a mic stand. But then again, Mick looks like a vulture so yeah I guess you could say it looks like a bird. I had a third hand that did not work. It was made from a foot long section of railroad track. It was heavy. I was using it to hold a small piece of aluminum on to another which I was going to weld together. The Al got hot and the arm sunk in! I then dropped it on my foot. I cut the damn thing up.
hey J you already did this joke!!! :)
Yes it looks like a little bit of it
good
haha MR jody im laughing hard at 3:25 am
Whatever it takes.
thats not a alien thats a elephant trunk
i thought it was great!
Love that joke
Got me!!! LOL
Bahaha, well kiss my grits.
he loves big butts and he can not lie!
haha good one
Awesome joke.
thats almost as good as stool softener lol
my english is bad, i will hear in english, please!